bdfe
bdfe might sound like crazy alphabet mixture but actually it is short name for Bitmap Distribution Format Exporter - utility which can extract subsets or export all glyphs from .bdf font files.
Why? I've decided to add a small oled display to my temperature/humidity station based on modded MMR-70 FM Music Transmitter but could not find any free 8x8 and 8x16 fonts in C format. There are tons of free fonts in bdf format because for years bdf has been used by UNIX X Windows. Converters available as well, but I needed very specific converter which would create fonts for SSD1306/SH1106 based OLED screens.
So here it is - bdf font converter which can export glyphs from bdf and present them as array of bytes. It also can rotate 8x8 and 8x16 glyphs CCW so they can be used on displays with SSD1306 controller.
I'm running it with on Raspberry Pi (same RPi I use to program MMR70 ATmega) but latest version can run Intel Edison with native Linux I2C interface or Arduino-like Wire. With the native Linux I2C interface it should run on any other Linux machine as well.
Command line options
bdfe understands a few command line options, in plain English words or, for lazy people like me, in short single letter option which happened to be the first letter of the corresponding word.
bdfe [options] <bdf file>
options are:
header: print file header
verbose: add extra info to the header
line: one line per glyph
subset a-b: subset of glyphs to convert a to b, default 32-126
all: print all glyphs, not just 32-126
native: do not adjust font height 8 pixels
ascender H: add extra ascender of H pixels per glyph
rotate: rotate glyphs' bitmaps CCW
display: show converted font on SSD1306/SH1106 compatible display
sh1106: SH1106 OLED controller is used instead of default SSH1306
i2c_bus B: I2C bus for SSD1306 compatible display (default 1)
i2c_addr A: I2C address for SSD1306 compatible display (default 0x3C)
updown: display orientation is upside down
So bdfe header verbose line all native file.bdf and bdfe -h -v -l -a -n file.bdf are the same.
There is no output file option - just redirect bdfe output to a file: bdfe -h -v -l -a -n font.bdf > font.h
OLED display is not needed for conversion but useful to have as you can immediately see if font is suitable with under-/over-line or inverse attributes. By default I2C slave address x3C is used, on my display this address is selected by connecting DC to GND, connecting it to Vcc switches address to x3D. If you do not know address of your SSD1306 display use i2cdetect
Source code
Source code can be split to standalone modules which might be used in other projects separately:
bdfe.h, bdfe.c - BDF file parser, single (quite big) function.
rterm.h, rterm.c - raw terminal input, kind of old nice getch().
ossd_i2c.h, ossd_i2c.c - OLED SSD1306/SH1106 controller interface using I2C bus. Simple text mode only with direct access to SSD1306/SH1106 registers, no shadow graphics buffer - memory on MMR70 ATmega32 MCU is a precious resource and anyway MMR70 will update screen only once in a while. Currently only fonts 8 and 16 bits high are supported. Underline, overline and inverse attributes can be used.
li2c.h, li2c.c - basic I2C wrapper for Linux i2c-dev library, provides communication with SSD1306 connected to I2C bus.
wi2c.h, wi2c.c - basic I2C wrapper for Arduino Wire object, not used in this project.
font8x8.h, font8x16.h - converted bdf files.
main.c - puts all of above together and does the work.
If you need to generate header files on the host system with no I2C use make CFLAGS=-DDISABLE_I2C.
Examples
Converting 7x8 font... Use bdfe ... | less to scroll exported font up and down.
OLED screen with 8x8 and 8x16 fonts converted and screen connected to a modded version of MMR-70 with current temperature and humidity reading.
For 8x16 font command option ascender 1 was used to lower glyphs 1 pixel down.
Licence
BSD