/windows

Windows in a Docker container.

Primary LanguageShellMIT LicenseMIT

Windows

Build Version Size Pulls

Windows in a Docker container.

Features

  • ISO downloader
  • KVM acceleration
  • Web-based viewer

Usage

Via docker-compose.yml

version: "3"
services:
  windows:
    image: dockurr/windows
    container_name: windows
    devices:
      - /dev/kvm
    cap_add:
      - NET_ADMIN
    ports:
      - 8006:8006
      - 3389:3389/tcp
      - 3389:3389/udp
    stop_grace_period: 2m
    restart: on-failure

Via docker run

docker run -it --rm --name windows -p 8006:8006 --device=/dev/kvm --cap-add NET_ADMIN --stop-timeout 120 dockurr/windows

FAQ

  • How do I use it?

    Very simple! These are the steps:

    • Start the container and connect to port 8006 using your web browser.

    • Sit back and relax while the magic happens, the whole installation will be performed fully automatic.

    • Once you see the desktop, your Windows installation is ready for use.

    Enjoy your brand new machine, and don't forget to star this repo!

  • How do I select the Windows version?

    By default, Windows 11 will be installed. But you can add the VERSION environment variable to your compose file, in order to specify an alternative Windows version to be downloaded:

    environment:
      VERSION: "win11"

    Select from the values below:

    Value Description Source Transfer Size
    win11 Windows 11 Pro Microsoft Fast 6.4 GB
    win10 Windows 10 Pro Microsoft Fast 5.8 GB
    ltsc10 Windows 10 LTSC Microsoft Fast 4.6 GB
    win81 Windows 8.1 Pro Microsoft Fast 4.2 GB
    win7 Windows 7 SP1 Bob Pony Medium 3.0 GB
    vista Windows Vista SP2 Bob Pony Medium 3.6 GB
    winxp Windows XP SP3 Bob Pony Medium 0.6 GB
    2022 Windows Server 2022 Microsoft Fast 4.7 GB
    2019 Windows Server 2019 Microsoft Fast 5.3 GB
    2016 Windows Server 2016 Microsoft Fast 6.5 GB
    2012 Windows Server 2012 R2 Microsoft Fast 4.3 GB
    2008 Windows Server 2008 R2 Microsoft Fast 3.0 GB
    core11 Tiny 11 Core Archive.org Slow 2.1 GB
    tiny11 Tiny 11 Archive.org Slow 3.8 GB
    tiny10 Tiny 10 Archive.org Slow 3.6 GB

    To install ARM64 versions of Windows use dockur/windows-arm.

  • How do I connect using RDP?

    The web-viewer is mainly meant to be used during installation, as its picture quality is low, and it has no audio or clipboard for example.

    So for a better experience you can connect using any Microsoft Remote Desktop client to the IP of the container, using the username docker and by leaving the password empty.

    There is a good RDP client for Android available from the Play Store. One for iOS is in the Apple Store. For Linux you can use rdesktop and for Windows you don't need to install anything as it is already ships as part of the operating system.

  • How do I increase the amount of CPU or RAM?

    By default, 2 CPU cores and 4 GB of RAM are allocated to the container, as those are the minimum requirements of Windows 11.

    To increase this, add the following environment variables:

    environment:
      RAM_SIZE: "8G"
      CPU_CORES: "4"
  • How do I change the size of the disk?

    To expand the default size of 64 GB, add the DISK_SIZE setting to your compose file and set it to your preferred capacity:

    environment:
      DISK_SIZE: "256G"

    This can also be used to resize the existing disk to a larger capacity without any data loss.

  • How do I change the storage location?

    To change the storage location, include the following bind mount in your compose file:

    volumes:
      - /var/win:/storage

    Replace the example path /var/win with the desired storage folder.

  • How do I share files with the host?

    Open File Explorer and click on the Network section, you will see a computer called host.lan, double-click it and it will show a folder called Data.

    Inside this folder you can access any files that are placed in /storage/shared (see above) on the host.

  • How do I install a custom image?

    In order to download a custom ISO image, start a clean container with the URL of the ISO specified in the VERSION environment variable:

    environment:
      VERSION: "https://example.com/win.iso"

    Alternatively, you can also rename a local file to custom.iso and place it in an empty /storage folder to skip the download.

  • How do I perform a manual installation?

    It's best to use the automatic installation, as it optimizes various settings for use with this container.

    However, if you insist on performing the installation manually, start a clean container with the following environment variable:

    environment:
      MANUAL: "Y"

    Then follow these steps:

    • Start the container and connect to port 8006 of the container in your web browser. After the download is finished, you will see the Windows installation screen.

    • Start the installation by clicking Install now. On the next screen, press 'OK' when prompted to Load driver and select the VirtIO SCSI driver from the list that matches your Windows version. So for Windows 11, select D:\amd64\w11\vioscsi.inf and click 'Next'.

    • Accept the license agreement and select your preferred Windows edition, like Home or Pro.

    • Choose Custom: Install Windows only (advanced), and click Load driver on the next screen. Select 'Browse' and navigate to the D:\NetKVM\w11\amd64 folder, and click 'OK'. Select the VirtIO Ethernet Adapter from the list and click 'Next'.

    • Select Drive 0 and click 'Next'.

    • Wait until Windows finishes copying files and completes the installation.

    • Once you see the desktop, open File Explorer and navigate to the CD-ROM drive (E:). Double-click on virtio-win-gt-x64.msi and proceed to install the VirtIO drivers.

    Enjoy your brand new machine, and don't forget to star this repo!

  • How do I assign an individual IP address to the container?

    By default, the container uses bridge networking, which shares the IP address with the host.

    If you want to assign an individual IP address to the container, you can create a macvlan network as follows:

    docker network create -d macvlan \
        --subnet=192.168.0.0/24 \
        --gateway=192.168.0.1 \
        --ip-range=192.168.0.100/28 \
        -o parent=eth0 vlan

    Be sure to modify these values to match your local subnet.

    Once you have created the network, change your compose file to look as follows:

    services:
      windows:
        container_name: windows
        ..<snip>..
        networks:
          vlan:
            ipv4_address: 192.168.0.100
    
    networks:
      vlan:
        external: true

    An added benefit of this approach is that you won't have to perform any port mapping anymore, since all ports will be exposed by default.

    Please note that this IP address won't be accessible from the Docker host due to the design of macvlan, which doesn't permit communication between the two. If this is a concern, you need to create a second macvlan as a workaround.

  • How can Windows acquire an IP address from my router?

    After configuring the container for macvlan (see above), it is possible for Windows to become part of your home network by requesting an IP from your router, just like a real PC.

    To enable this mode, add the following lines to your compose file:

    environment:
      DHCP: "Y"
    devices:
      - /dev/vhost-net
    device_cgroup_rules:
      - 'c *:* rwm'

    Please note that in this mode, the container and Windows will each have their own separate IPs. The container will keep the macvlan IP, and Windows will use the DHCP IP.

  • How do I pass-through a disk?

    It is possible to pass-through disk devices directly by adding them to your compose file in this way:

    environment:
      DEVICE: "/dev/sda"
      DEVICE2: "/dev/sdb"
    devices:
      - /dev/sda
      - /dev/sdb

    Use DEVICE if you want it to become your main drive, and use DEVICE2 and higher to add them as secondary drives.

  • How do I pass-through a USB device?

    To pass-through a USB device, first lookup its vendor and product id via the lsusb command, then add them to your compose file like this:

    environment:
      ARGUMENTS: "-device usb-host,vendorid=0x1234,productid=0x1234"
    devices:
      - /dev/bus/usb
  • How do I verify if my system supports KVM?

    To verify if your system supports KVM, run the following commands:

    sudo apt install cpu-checker
    sudo kvm-ok

    If you receive an error from kvm-ok indicating that KVM acceleration can't be used, check the virtualization settings in the BIOS.

  • Is this project legal?

    Yes, this project contains only open-source code and does not distribute any copyrighted material. Any product keys found in the code are just generic placeholders provided by Microsoft for trial purposes. So under all applicable laws, this project would be considered legal.

Stars

Stars

Disclaimer

The product names, logos, brands, and other trademarks referred to within this project are the property of their respective trademark holders. This project is not affiliated, sponsored, or endorsed by Microsoft Corporation.