- This is an potential upcoming Hack Club You Ship, We Ship (YSWS) program.
This project is semi-endorsed by Hack Club and isn't fully an official program yet.
- Things are still under heavy development as the Forge Editor and the Forge Printer are WIP (Work in Progress) projects
- All information on this README is subject to change at any moment
- Submission requirements, images, and links are not final. Website URLs are placeholders and may not be functional
- If you have any questions about the Development of Forge (and are a teen under 18), feel free to visit #forge-dev on the Hack Club Slack!
Landing Page | Forge Editor | Gallery
2nd Place Finalist of the Hack Club Arcade Showcase 2024, out of over 2000 projects.
Find problems in the world and use programmatic 3D modeling to solve them. Submit your solutions to the Gallery and get a Forge 3D Printer Forge is planned to be a You Ship, We Ship project from Hack Club.
Forge is fully open source. The online editor can be freely used (or modified) by anyone, and we encourage all to submit to the gallery through PRs! However, you must be a teenager or younger to receive a free printer.
Building a model in the Forge editor is easy to learn, hard to master. You need abosultely no CAD or programming knowledge to get started. Since the Forge Editor is based on the OpenSCAD modeling language, it presents a challenge to even the most experienced parametric modelers.
The Forge YSWS Project can be considered 4 major sections:
- Forge Printer - the cantilevered 3D Printer
- Forge Editor - the OpenSCAD-based online modeling software and slicer designed for the Forge Printer
- Forge Mainboard - the custom-engineered control board powered by a STM32F405 and TMC2209s. Also includes the interface board
- Forge Firmware - The custom-engineered firmware that powers the Forge Mainboard
The Forge Printer is a fast, inexpensive, and compact cantilevered 3D Printer. More details soon!
These are Forge's specifications as of November 25, 2024. We're currently in the process of building MK2. As we get closer to 2025, more details will be published.
- STM32F405RGT6 32-Bit MCU
- TMC2209 Stepper Drivers
- Reduced Motor Noise
- Sensorless XY homing
- TZ-E3 Hotend
- 300°C Maximum Temperature
- Designed around the Bambu Lab X1C hotend
- 30mm³/s max flow rate
- 120x120x145mm Build Volume
- Up to 100°C heated bed temperature
- Magnetic Textured PEI Plate
- MGN9C Linear Rails on X and Z axies
- MGN12C Linear Rail on Y axis
- Sherpa Mini Direct Drive Extruder (DDE)
- Fully Automatic Bed Leveling (ABL)
- Meanwell RPS-200-24 PSU (Intergrated)
- PLA, PETG, TPU capable
- ABS and ASA are possible but require an enclosure and active ventilation
- Aluminum and 3D Printed ASA frame
- 3010 Axial Fan for Heatbreak cooling and 4010 "Blower-style" fan for part cooling
- Up to 500mm/s Print Velocity* *This number is an estimate, real print speeds will be updated as Forge's development continues
- SD1306 1.92" OLED and Rotary Encoder for the interface
-
The Forge Mainboard will run on Marlin Firmware. (Custom, open source Forge Firmware is planned but development has been halted to work on MK2)
-
The Forge Mainboard (2-layer PCB) is supported by Klipper
- Using the Forge Printer with Klipper will be possible! The latest revision of the Forge Mainboard (2 layer PCB version) runs a STM32F405 which is fully compatible with Klipper! Additionally, we'll be providing a Klipper WiP configuration file and OrcaSlicer profiles (Coming Soon) for you!
- SBC Info:
- A Raspberry Pi Zero 2W will be required for Klipper. You can also use another SBC (that can run MainSailOS or Fluidd) with the same form factor. However, the Zero W (1st Gen) is highly not recommended due to performance limitations. Larger SBCs like the Raspberry Pi 1/2/3/4/5 boards are not compatible due to size limitations. We'll be providing a Raspberry Pi Zero Bracket available to print closer to MK2's launch! The Forge Mainboard connects to the SBC via GPIO to GPIO, therefore, SPI touchscreens are not recommended.
- The full Forge Printer and Mainboard BOM will (soon be) at the bottom of this doc. The Forge Printer BOM will not be available until we begin prototyping. However, the BOM for the Forge Mainbaord is currently available as a CSV in
Electronics/Motherboard/billofmaterials.csv. - The estimated value of the Forge Printer is $200-$250, but this estimate will change over time.
- However, Forge will be 100% Free for teens 18 and under after designing 5 models and submitting a PR
- Currently, Forge's parts and components are planned to be manufactured by Siboor, a well established supplier of 3D Printing components.
- Forge is designed in Onshape. Check out the 3D model!
- Currently, the Forge Project is GPLV3 (General Public License)
- The design uses a Annex Engineering Sperpa Mini Extruder.
- In compliance with their guidelines, the CAD models of the Forge Printer will use a placeholder provided by Annex Engineering.
- Sherpa Mini GitHub
- Anybody is allowed to freely use, advertise, modify, copy, or distribute any Forge designs or software as needed with the condition that any public distribution or use of Forge software/design must also be open source and use GPL.
- For more information about this license, check out this link
- Forge's banking is fully transparent: Check it out now!
- Donate to the Forge Project, any dollar counts!
- **Forge is now offically fiscally sponsored by Hack Club (a 501(c)(3) NPO with EIN 81-2908499)!
Look around! Find problems that 3D printing can fix. From a carabiner to a phone case!
Using the Forge Editor, follow the tutorials (link coming soon!) and program your solutions in OpenSCAD.
The submission rules to get a Forge Printer for a PR are (not available, the Forge design guidelines will be accessible at launch). You must be a teenager (or younger to qualify for a free machine) but anyone can make a model and make a PR. Currently, we are requiring 5 Blot-level (of quality) models. This may change as the project progresses. While the full guidelines are not accessible, here are the basics of what you should(n't) do with your Forge project:
- Exporting your design to an STL is an option if you want to test your model on another 3D printer before you submit a PR.
- A PR should have a .scad and .stl file
- Don't copy OpenSCAD code from other websites/generate code with AI (ChatGPT)
- Doing so is considered plagiarism. Anyone submitting fraudulent code will be ineligible for a Forge Printer and may result in a violation of the Hack Club Code of Conduct
- Don't build your model using Parametric CAD software (Fusion, OnShape, Shapr3D, etc.)
- Your model should be both functional and have some aesthetic quality.
- TL:DR, make it look nice
- Your model should have effort (roughly 8 hours per model)
The bill of materials for the Forge Printer will be coming soon here as we start finalizing the printer. An assembly guide will also be available here (coming soon!). Also note that, currently, the BOMs are not polished as we communicate with Siboor and test manufacture.
- Coming soon! We have the finished BOM for the MK1 Prototype from Siboor which we just need to clean up before posting here!
- Krishna Meda (@EmperorNumerius) - Project Lead, Communications, Forge Editor Dev, Promotional Materials
- Arnnav Kudale (@blazecoding2009) - Project Lead, Sourcing, Electrical Engineering, Forge Firmware/Klipper Config Dev
- Michael Panait (@mikeymascatu) - Design Engineering, Promotional Materials
- Brendan Conover (@AGB556) - Design Engineering
- Malav Patel (@astro-develops) - Forge Editor/Landing Page Frontend Developer, Promotional Materials
- Arthur Beck (@AverseABFun) - Forge Firmware Dev
- Aaron Wong (@aaronw-dev) - Former Project Lead, Firmware Dev, Artist, Electrical Engineer
- Engineering and Sales teams at Siboor - This project wouldn't be possible without them <3
- Patricio (@Patcybermind) - Former Forge Editor Developer
- Max Wofford (@maxwofford) - Hack Club HQ Representative, Forge Benefactor
- Alex Ren (@qcoral) - Thanks for the help with licensing!
- Annex Engineering (@Annex-Engineering) - Thanks for helping with the Sherpa Mini copyright!
- Jonathan Dong (@Dongathan-Jong) - Forge Art, Promotional Materials
- Beenana (@Beenana02) - Promotional Materials