hagdn

Student

Philippines

Pinned Repositories

Arduino_Uno_Makefile
A tested and working Makefile I came up with for automating the compilation and flashing of my codes to the ATmega328p through USB and BOOTLOADER.
Language:Makefile00
avr-uno-bare-blink
This is a simple code that makes use of registers. It's my first code diving into bare metal programming.
Language:C00
avr-uno-bare-external-interrupt
This code makes use of the first (INT0) external interrupt of the Arduino-Uno.
Language:C00
avr-uno-DUAL-pin-change-interrupt
This code is a demonstration when two interrupt pins from same interrupt pin group is being used.
Language:C00
avr-uno-pin-change-interrupt
This is a code for a pin change interrupt using a single pin. The code is made complicated by adding a second output pin.
Language:C00
avr-uno-timers-interrupt-normal
A code demonstrating the use of timers in normal mode.
Language:C00
Henjie_Agadan
About me
0 1 00
MSP430-ASM-DATA-MANIPULATION
This section covers the Arithmetic instructions of the MSP430FR2433
Language:Batchfile00
MSP430-ASM-DATA-MOV
Studying the MSP430 Data Movement
Language:Batchfile00
STM32-HAL-Blink
Simplified generated code of the STM32CubeIDE. This code is only for studying purposes.
Language:C00

hagdn/Arduino_Uno_Makefile
A tested and working Makefile I came up with for automating the compilation and flashing of my codes to the ATmega328p through USB and BOOTLOADER.
Language:Makefile00
hagdn/avr-uno-bare-blink
This is a simple code that makes use of registers. It's my first code diving into bare metal programming.
Language:C00
hagdn/avr-uno-bare-external-interrupt
This code makes use of the first (INT0) external interrupt of the Arduino-Uno.
Language:C00
hagdn/avr-uno-DUAL-pin-change-interrupt
This code is a demonstration when two interrupt pins from same interrupt pin group is being used.
Language:C00
hagdn/avr-uno-pin-change-interrupt
This is a code for a pin change interrupt using a single pin. The code is made complicated by adding a second output pin.
Language:C00
hagdn/avr-uno-timers-interrupt-normal
A code demonstrating the use of timers in normal mode.
Language:C00
hagdn/Henjie_Agadan
About me
0 1 00
hagdn/MSP430-ASM-DATA-MANIPULATION
This section covers the Arithmetic instructions of the MSP430FR2433
Language:Batchfile00
hagdn/MSP430-ASM-DATA-MOV
Studying the MSP430 Data Movement
Language:Batchfile00
hagdn/STM32-HAL-Blink
Simplified generated code of the STM32CubeIDE. This code is only for studying purposes.
Language:C00
hagdn/MSP430-ASM-GPIO
This section covers the how-to of using peripherals the MSP430FR2433 has, i.e. the GPIO.