Cer2nut adapts the protocol of a Certabo chess e-board to the Chessnut protocol used in the Chessnut Air and Chessnut Pro e-boards.
The adapter allows software written to support the Chessnut e-boards to be used with a Certabo e-board or a Tabutronic Sentio e-board. Not all software written for the Chessnut protocol may work with this adapter and there is no guarantee that this adapter will work in the future.
This software is only compatible with development boards having a ESP32-S3-WROOM-1 chip and a USB OTG port on board.
ESP-IDF >= 5.1.1 https://idf.espressif.com/
Use at Own Risk. The Software is licensed for free under the GNU general public license version 3 and “as is” and may not operate properly, be in final form or fully functional, and may have errors, bugs, design flaws, and other defects. Use of the software is at your own risk, the author is not responsible for any damage to your equipment when using this software!
After flashing the firmware, connect the USB OTG port to the Certabo E-Board and the second USB port to the power supply.
Place the chess pieces on the corresponding squares of the starting position. Place any additional queens on d3 and d6. On the first connection the pieces are registered. This calibration takes a few seconds and must be repeated if there is a power interruption.
Place the chess pieces on the corresponding squares of the starting position. Do not place additional queens on the board. Since the hardware of Sentio e-boards does not support piece recognition, there is one limitation:
- Chess games can only be started from the normal chess starting position. At the end of a game, place all the pieces back to the starting position.
By default, a pawn is promoted to a queen. To promote to a knight, bishop or rook, use the following sequence:
- pick up the pawn to promote
- pick up the king of the same color
- put down the king --> the promotion piece becomes a knight
- put down the promotion piece on the promotion square
- Follow steps 2+3 twice to convert the promotion piece into a bishop.
- Follow steps 2+3 three times to convert the promotion piece into a rook.
- Follow steps 2+3 four times to convert the promotion piece back into a queen.
The change of the promotion piece is only valid for the next promotion; any other move resets the promotion piece back to a queen.
When switching between e-boards, always turn off the module before changing boards.
Playing on a Certabo e-board with the official Chessnut app for Android:
Playing on a Tabutronic Sentio e-board with the official Chessnut app for iOS:
