- Try the release version at banglejs.com/apps
- Try the development version at espruino.github.io
The release version is manually refreshed with regular intervals while the development version is continuously updated as new code is committed to this repository.
All software (including apps) in this repository is MIT Licensed - see LICENSE By submitting code to this repository you confirm that you are happy with it being MIT licensed, and that it is not licensed in another way that would make this impossible.
- A list of apps is in
apps.json(this is auto-generated from all theapps/yourapp/metadata.jsonusing Jekyll orbin/create_apps_json.sh) - Each element references an app in
apps/<id>which is uploaded - When it starts, BangleAppLoader checks the JSON and compares it with the files it sees in the watch's storage.
- To upload an app, BangleAppLoader checks the files that are
listed in
apps.json, loads them, and sends them over Web Bluetooth.
Check out:
- Building your first Bangle.js Application
- Adding an app to the Bangle.js App Loader
- Customising the App Loader
Filenames in storage are limited to 28 characters. To easily distinguish between file types, we use the following:
stuff.infois JSON that describes an app - this is auto-generated by the App Loaderstuff.imgis an imagestuff.app.jsis JS code for applicationsstuff.wid.jsis JS code for widgetsstuff.settings.jsis JS code for the settings menustuff.boot.jsis JS code that automatically gets run at boot timestuff.jsonis used for JSON settings for an app
- Head over to the Web IDE and ensure
Save on Sendin settings set to the default setting ofTo RAM - We'd recommend that you start off using code from 'Example Applications' (below) to get started...
- Load
app.jsorwidget.jsinto the IDE and start developing. - The
Uploadbutton will load your app to Bangle.js temporarily
- Come up with a unique (all lowercase, no spaces) name, we'll assume
myappid. Bangle.js is limited to 28 char filenames and appends a file extension (eg.js) so please try and keep filenames short to avoid overflowing the buffer. - Create a folder called
apps/<id>, lets assumeapps/myappid - We'd recommend that you copy files from one of the Examples in
apps/_example_*(see below), or... apps/myappid/app.pngshould be a 48px icon- Use http://www.espruino.com/Image+Converter to create
apps/myappid/app-icon.js, using a 1 bit, 4 bit or 8 bit Web Palette "Image String" - Create/modify
apps/myappid/metadata.jsonas follows:
{ "id": "myappid",
"name": "My app's human readable name",
"shortName" : "Short Name",
"icon": "app.png",
"description": "A detailed description of my great app",
"tags": "",
"storage": [
{"name":"myappid.app.js","url":"app.js"},
{"name":"myappid.img","url":"app-icon.js","evaluate":true}
],
},
In the app metadata.json file you can add a list of screenshots with a line like: "screenshots" : [ { "url":"screenshot.png" } ],
To get a screenshot you can:
- Type
g.dump()in the left-hand side of the Web IDE when connected to a Bangle.js 2 - you can then right-click and save the image shown in the terminal (this only works on Bangle.js 2 - Bangle.js 1 is unable to read data back from the LCD controller). - Run your code in the emulator and use the screenshot button in the bottom right of the window.
This is the best way to test...
- Fork the https://github.com/espruino/BangleApps git repository
- Add your files
- Go to GitHub Settings and activate GitHub Pages
- Run your personal
Bangle App Loaderat https://<your-github-username>.github.io/BangleApps/index.html to load apps onto your device - Your apps should be inside it - if there are problems, check your web browser's 'developer console' for errors
Note: It's a great idea to get a local copy of the repository on your PC,
then run bin/sanitycheck.js - it'll run through a bunch of common issues
that there might be. To get the project running locally, you have to initialize and update the git submodules first: git submodule update --init.
Be aware of the delay between commits and updates on github.io - it can take a few minutes (and a 'hard refresh' of your browser) for changes to take effect.
Using the 'Storage' icon in the Web IDE (4 discs), upload your files into the places described in your JSON:
app-icon.js->myappid.img
Now load app.js up in the editor, and click the down-arrow to the bottom
right of the Send to Espruino icon. Click Storage and then either choose
myappid.app.js (if you'd uploaded your app previously), or New File
and then enter myappid.app.js as the name.
Now, clicking the Send to Espruino icon will load the app directly into
Espruino and will automatically run it.
When you upload code this way, your app will even be uploaded to Bangle.js's menu
without you having to use the Bangle App Loader
Note: Widgets need to be run inside a clock or app, so if you're
developing a widget you need to go go Settings -> Communications -> Load after saving
and set it to Load default application.
To make the process easier we've come up with some example applications that you can use as a base
when creating your own. Just come up with a unique name (ideally lowercase, under 20 chars), copy apps/_example_app
or apps/_example_widget to apps/myappid, and edit apps/myappid/metadata.json accordingly.
Note: the max filename length is 28 chars, so we suggest an app ID of under
20 so that when .app.js/etc gets added to the end the filename isn't cropped.
If you're making a widget please start the name with wid to make
it easy to find!
The app example is available in apps/_example_app
Apps are listed in the Bangle.js menu, accessible from a clock app via the middle button.
metadata.json- describes the app to bootloader and loaderapp.png- app icon - 48x48pxapp-icon.js- JS version of the icon (made with http://www.espruino.com/Image+Converter) for use in Bangle.js's menuapp.js- app codeChangeLog- A file containing a list of changes to your app so users can see what's changed
The icon image and short description is used in Bangle.js's launcher.
Use the Espruino image converter and upload your app.png file.
Follow this steps to create a readable icon as image string.
- upload a 48x48 png file - THE IMAGE SHOULD BE 48x48 OR LESS
- set X Use Compression
- set X Transparency (optional)
- set Diffusion: flat
- set Colours: 1 bit, any of the Optimised options, or 8 bit Web Palette are best
- set Output as: Image String
Replace this line with the image converter output:
require("heatshrink").decompress(atob("mEwwJC/AH4A/AH4AgA=="))
Do not add a trailing semicolon
You can also use this converter for creating images you like to draw with g.drawImage() with your app.
Apps that need widgets can call Bangle.loadWidgets() once at startup to load
them, and then Bangle.drawWidgets() to draw them onto the screen whenever the app
has call to completely clear the screen. Widgets themselves will update as and when needed.
The widget example is available in apps/_example_widget
metadata.json- describes the widget to bootloader and loaderwidget.js- widget code
Widgets are just small bits of code that run whenever an app that supports them
calls Bangle.loadWidgets(). If they want to display something in the 24px high
widget bar at the top of the screen they can add themselves to the global
WIDGETS array with:
WIDGETS["mywidget"]={
area:"tl", // tl (top left), tr (top right), bl (bottom left), br (bottom right)
sortorder:0, // (Optional) determines order of widgets in the same corner
width: 24, // how wide is the widget? You can change this and call Bangle.drawWidgets() to re-layout
draw:draw // called to draw the widget
};
When the widget is to be drawn, x and y values are set up in WIDGETS["mywidget"]
and draw can then use this.x and this.y to figure out where it needs to draw to.
This is a file containing a list of changes to your app so users can see what's changed, for example:
0.01: New App!
0.02: Changed the colors
0.03: Made the app run quicker
Entries should be newest last, with the version number of the last entry matching the version in metadata.json
Please keep the same format at the example as the file needs to be parsed by the BangleApps tools.
This is the file that's auto-generated from metadata.json and loaded onto Bangle.js by the App Loader,
and which gives information about the app for the Launcher.
{
"name":"Short Name", // for Bangle.js menu
"icon":"*myappid", // for Bangle.js menu
"src":"-myappid", // source file
"type":"widget/clock/app/bootloader/...", // optional, default "app"
// see 'type' in 'metadata.json format' below for more options/info
"version":"1.23",
// added by BangleApps loader on upload based on metadata.json
"files:"file1,file2,file3",
// added by BangleApps loader on upload - lists all files
// that belong to the app so it can be deleted
"data":"appid.data.json,appid.data?.json;appidStorageFile,appidStorageFile*"
// added by BangleApps loader on upload - lists files that
// the app might write, so they can be deleted on uninstall
// typically these files are not uploaded, but created by the app
// these can include '*' or '?' wildcards
}
{ "id": "appid", // 7 character app id
"name": "Readable name", // readable name
"shortName": "Short name", // short name for launcher
"version": "0v01", // the version of this app
"description": "...", // long description (can contain markdown)
"icon": "icon.png", // icon in apps/
"screenshots" : [ { "url":"screenshot.png" } ], // optional screenshot for app
"type":"...", // optional(if app) -
// 'app' - an application
// 'clock' - a clock - required for clocks to automatically start
// 'widget' - a widget
// 'module' - this provides a module that can be used with 'require'.
// 'provides_modules' should be used if type:module is specified
// 'bootloader' - an app that at startup (app.boot.js) but doesn't have a launcher entry for 'app.js'
// 'settings' - apps that appear in Settings->Apps (with appname.settings.js) but that have no 'app.js'
// 'clkinfo' - Provides a 'myapp.clkinfo.js' file that can be used to display info in clocks - see modules/clock_info.js
// 'RAM' - code that runs and doesn't upload anything to storage
// 'launch' - replacement 'Launcher'
// 'textinput' - provides a 'textinput' library that allows text to be input on the Bangle
// 'scheduler' - provides 'sched' library and boot code for scheduling alarms/timers
// (currently only 'sched' app)
// 'notify' - provides 'notify' library for showing notifications
// 'locale' - provides 'locale' library for language-specific date/distance/etc
// (a version of 'locale' is included in the firmware)
"tags": "", // comma separated tag list for searching
// common types are:
// 'clock' - it's a clock
// 'widget' - it is (or provides) a widget
// 'outdoors' - useful for outdoor activities
// 'tool' - a useful utility (timer, calculator, etc)
// 'game' - a game
// 'bluetooth' - uses Bluetooth LE
// 'system' - used by the system
// 'clkinfo' - provides or uses clock_info module for data on your clock face or clocks that support it (see apps/clock_info/README.md)
// 'health' - e.g. heart rate monitors or step counting
"supports": ["BANGLEJS2"], // List of device IDs supported, either BANGLEJS or BANGLEJS2
"dependencies" : { "notify":"type" } // optional, app 'types' we depend on (see "type" above)
"dependencies" : { "messages":"app" } // optional, depend on a specific app ID
// for instance this will use notify/notifyfs is they exist, or will pull in 'notify'
"dependencies" : { "messageicons":"module" } // optional, depend on a specific library to be used with 'require' - see provides_modules
"dependencies" : { "message":"widget" } // optional, depend on a specific type of widget - see provides_widgets
"provides_modules" : ["messageicons"] // optional, this app provides a module that can be used with 'require'
"provides_widgets" : ["battery"] // optional, this app provides a type of widget - 'alarm/battery/bluetooth/pedometer/message'
"default" : true, // set if an app is the default implementer of something (a widget/module/etc)
"readme": "README.md", // if supplied, a link to a markdown-style text file
// that contains more information about this app (usage, etc)
// A 'Read more...' link will be added under the app
"custom": "custom.html", // if supplied, apps/custom.html is loaded in an
// iframe, and it must post back an 'app' structure
// like this one with 'storage','name' and 'id' set up
// see below for more info
"customConnect": true, // if supplied, ensure we are connected to a device
// before the "custom.html" iframe is loaded. An
// onInit function in "custom.html" is then called
// with info on the currently connected device.
"interface": "interface.html", // if supplied, apps/interface.html is loaded in an
// iframe, and it may interact with the connected Bangle
// to retrieve information from it
// see below for more info
"allow_emulator":true, // if 'app.js' will run in the emulator, set to true to
// add an icon to allow your app to be tested
"storage": [ // list of files to add to storage
{"name":"appid.js", // filename to use in storage.
// If name=='RAM', the code is sent directly to Bangle.js and is not saved to a file
"url":"", // URL of file to load (currently relative to apps/)
"content":"...", // if supplied, this content is loaded directly
"evaluate":true, // if supplied, data isn't quoted into a String before upload
// (eg it's evaluated as JS)
"noOverwrite":true // if supplied, this file will not be overwritten if it
// already exists
"supports": ["BANGLEJS2"]// if supplied, this file will ONLY be uploaded to the device
// types named in the array. This allows different versions of
// the app to be uploaded for different platforms
},
]
"data": [ // list of files the app writes to
{"name":"appid.data.json", // filename used in storage
"storageFile":true // if supplied, file is treated as storageFile
"url":"", // if supplied URL of file to load (currently relative to apps/)
"content":"...", // if supplied, this content is loaded directly
"evaluate":true, // if supplied, data isn't quoted into a String before upload
// (eg it's evaluated as JS)
},
{"wildcard":"appid.data.*" // wildcard of filenames used in storage
}, // this is mutually exclusive with using "name"
],
"sortorder" : 0, // optional - choose where in the list this goes.
// this should only really be used to put system
// stuff at the top
}
- name, icon and description present the app in the app loader.
- tags is used for grouping apps in the library, separate multiple entries by comma. Known tags are
tool,system,clock,game,sound,gps,widget,launcher,bluetoothor empty. - storage is used to identify the app files and how to handle them
- data is used to clean up files when the app is uninstalled
Apps that can be customised need to define a custom element in metadata.json,
which names an HTML file in that app's folder.
When custom is defined, the 'upload' button is replaced by a customize
button, and when clicked it opens the HTML page specified in an iframe.
In that HTML file you're then responsible for handling a button
press and calling sendCustomizedApp with your own customised
version of what's in metadata.json:
<html>
<head>
<link rel="stylesheet" href="../../css/spectre.min.css">
</head>
<body>
<p><button id="upload" class="btn btn-primary">Upload</button></p>
<script src="../../lib/customize.js"></script>
<script>
document.getElementById("upload").addEventListener("click", function() {
sendCustomizedApp({
id : "myappid",
storage:[
{name:"myappid.app.js", url:"app.js", content:app_source_code},
{name:"myappid.img", content:'require("heatshrink").decompress(atob("mEwg...4"))', evaluate:true},
]
});
});
</script>
</body>
</html>
This'll then be loaded in to the watch. See [apps/qrcode/grcode.html](the QR Code app) for a clean example.
Note: we specify a url for JS files even though it doesn't have to exist
and will never be loaded. This is so the app loader can tell if it's a JavaScript
file based on the extension, and if so it can minify and pretokenise it.
Apps that create data that can be read back can define a interface element in metadata.json,
which names an HTML file in that app's folder.
When interface is defined, a Download from App button is added to
the app's description, and when clicked it opens the HTML page specified
in an iframe.
<html>
<head>
<link rel="stylesheet" href="../../css/spectre.min.css">
</head>
<body>
<script src="../../lib/interface.js"></script>
<div id="t">Loading...</div>
<script>
function onInit() {
Puck.eval("E.getTemperature()", temp=> {
document.getElementById("t").innerHTML = temp;
});
}
</script>
</body>
</html>
When the page is ready a function called onInit is called,
and in that you can call Puck.write and Puck.eval to get
the data you require from Bangle.js.
See [apps/gpsrec/interface.html](the GPS Recorder) for a full example.
Apps (or widgets) can add their own settings to the "Settings" menu under "App/widget settings".
To do so, the app needs to include a settings.js file, containing a single function
that handles configuring the app.
When the app settings are opened, this function is called with one
argument, back: a callback to return to the settings menu.
Usually it will save any information in myappid.json where myappid is the name
of your app - so you should change the example accordingly.
Example settings.js
// make sure to enclose the function in parentheses
(function(back) {
let settings = require('Storage').readJSON('myappid.json',1)||{};
if (typeof settings.monkeys !== "number") settings.monkeys = 12; // default value
function save(key, value) {
settings[key] = value;
require('Storage').write('myappid.json', settings);
}
const appMenu = {
'': {'title': 'App Settings'},
'< Back': back,
'Monkeys': {
value: settings.monkeys,
onchange: (m) => {save('monkeys', m)}
}
};
E.showMenu(appMenu)
})In this example the app needs to add myappid.settings.js to storage in metadata.json.
It should also add myappid.json to data, to make sure it is cleaned up when the app is uninstalled.
{ "id": "myappid",
...
"storage": [
...
{"name":"myappid.settings.js","url":"settings.js"}
],
"data": [
{"name":"myappid.json"}
]
},You can include any of Espruino's modules as
normal with require("modulename"). To include Bangle's modules for use in the Web
IDE, upload the modules to internal storage
or change the IDE's search path.
If you want to develop your own module for your
app(s) then you can do that too. Just add the module into the modules folder
then you can use it from your app as normal.
You won't be able to develop apps using your own modules with the IDE,
so instead we'd recommend you write your module to a Storage File called
modulename on Bangle.js. You can then develop your app as normal on Bangle.js
from the IDE.
-
use
g.setFont(.., size)to multiply the font size, eg ("6x8",3) : "18x24" -
use
g.drawString(text,x,y,true)to draw with background color to overwrite existing text -
use
g.clearRect()to clear parts of the screen, instead of usingg.clear() -
use
g.fillPoly()org.drawImage()for complex graphic elements -
using
g.clear()can cause screen flicker -
using
g.setLCDBrightness()can save you power during long periods with lcd on -
chaining graphics methods, eg
g.setColor(0xFD20).setFontAlign(0,0).setfont("6x8",3)
-
Need to save state? Use the
E.on('kill',...)event to save JSON to a file calledmyappid.json, then load it at startup. -
'Alarm' apps define a file called
alarm.jswhich handles the actual alarm window. -
Locale is handled by
require("locale"). An app may create alocalefile in Storage which is a module that overwrites Bangle.js's default locale.
The screen is parted in a widget and app area for lcd mode direct(default).
| areas | as rectangle or point |
|---|---|
| Widget | (0,0,239,23) |
| Apps | (0,24,239,239) |
| BTN1 | (230, 55) |
| BTN2 | (230, 140) |
| BTN3 | (230, 210) |
| BTN4 | (0,0,119, 239) |
| BTN5 | (120,0,239,239) |
-
Use
g.setFontAlign(0, 0, 3)to draw rotated string to BTN1-BTN3 withg.drawString(). -
For BTN4-5 the touch area is named
You can use g.setColor(r,g,b) OR g.setColor(16bitnumber) - some common 16 bit colors are below:
| color-name | color-value |
|---|---|
| Black | 0x0000 |
| Navy | 0x000F |
| DarkGreen | 0x03E0 |
| DarkCyan | 0x03EF |
| Maroon | 0x7800 |
| Purple | 0x780F |
| Olive | 0x7BE0 |
| LightGray | 0xC618 |
| DarkGrey | 0x7BEF |
| Blue | 0x001F |
| Green | 0x07E0 |
| Cyan | 0x07FF |
| RED | 0xF800 |
| Magenta | 0xF81F |
| Yellow | 0xFFE0 |
| White | 0xFFFF |
| Orange | 0xFD20 |
| GreenYellow | 0xAFE5 |
| Pink | 0xF81F |
A recent addition to Bangle.js is the ability to use extra fonts with support for more characters. For example all regions or extended fonts.
Once installed, these apps cause a new font, Intl to be added to Graphics, which can be used with just g.setFont("Intl").
There is also a font library - this is not implemented yet, but more information about the planned implementation
is available at espruino#3109
For now, to make your app work with the international font, you can check if Graphics.prototype.setFontIntl exists,
and if so you can change the font you plan on using:
myFont = "6x8:2";
if (Graphics.prototype.setFontIntl)
myFont = "Intl";Any new Font library must contain the metadata "icon": "app.png", "tags": "font", "type": "module", "provides_modules" : ["fonts"],
and should provide a font library, as well as a boot.js that adds Graphics.prototype.setFontIntl. If you plan on
making a new library it's best to just copy one of the existing ones for now.
The testing folder contains snippets of code that might be useful for your apps.
testing/colors.js- 16 bit colors as name value pairstesting/gpstrack.js- code to store a GPS track in Bangle.js storage and output it back to the console
The majority of icons used for these apps are from Icons8 - we have a commercial license but icons are also free for Open Source projects.