a bakeneko 60 with otd 360 corsa + lz-re style side profile, cherry lip, internal brass weight, limited plate for better feel/looks/sound, and compatibility with common pcbs
5.5 deg typing angle, 17.9 mm front face height without lip
there's also a version without a weight for those who want to have this with minimal cost
disclaimer: i have not prototyped this and there are possibilities that it will not work. i am not responsible for replacing faulty products
| Part | Quantity per Board | Link 1 | Link 2 | Notes |
|---|---|---|---|---|
| Daughterboard Screws | 4 | McMaster-Carr (Hex) | McMaster-Carr (Philips) | philips bad |
| Weight Screws | 2 | McMaster-Carr | N/A | |
| 8 mm Bumpons | 4 | McMaster-Carr | Amazon US | Anything goes tbh |
additionally requires one o-ring wrapped around the pcb and plate assembly to be mounted. here are mcmaster links for 50a, 70a, and 90a. if mcmaster doesn't work for you, then you need a 1/8" width o ring with 262 (or slightly larger for higher durometers) dash number in your hardness of choice.
requires a unified daughterboard. compatible pcbs include plain60-flex, had60, h60, nop60, and anything that uses unikorn posts probably
thanks to elaine for legalizing this keyboard
feel free to contact me @hali#4045 on discord if you have any questions, concerns, or requests