hallboyone/RaspberryLatte

Issues

• Flow rate sensor is slow and not accurate at low flows

  #26 opened a year ago by hallboyone
  1

• ENHANCEMENT-update-settings-in-terminal

  #24 opened a year ago by hallboyone
  1

• Replace return-to-root with up-a-level in local_ui

  #23 opened a year ago by hallboyone
  0

• Add pressure profiling to autobrew routines

  #14 opened 2 years ago by hallboyone
  0

• Add constant temp offset

  #10 opened 2 years ago by hallboyone
  0

• CRITICAL - Occasional erratic behavior in boiler

  #16 opened 2 years ago by hallboyone
  3

• Enhancement - Steam boost

  #20 opened 2 years ago by hallboyone
  0

• 5V flow rate not supported by control board without modifications

  #11 opened 2 years ago by hallboyone
  1

• Ground plane around AC traces

  #9 opened 2 years ago by hallboyone
  1

• Add thermal runaway safeguards

  #17 opened 2 years ago by hallboyone
  0

• Inconsistent API

  #6 opened 2 years ago by hallboyone
  0

• Make integral windup bound dependent on output limits.

  #12 opened 2 years ago by hallboyone
  0

• Flow rate starts at non-zero value when machine is switched on.

  #8 opened 2 years ago by hallboyone
  1

• Occasional spikes in temperature

  #7 opened 2 years ago by hallboyone
  0

• Missing I2C pull up resisters

  #3 opened 2 years ago by hallboyone
  1

• No external pull-up/pull-down resisters on board

  #4 opened 2 years ago by hallboyone
  1