Fast, concurrent, evicting in-memory cache written to keep big number of entries without impact on performance. BigCache keeps entries on heap but omits GC for them. To achieve that operations on bytes arrays take place, therefore entries (de)serialization in front of the cache will be needed in most use cases.
Requires Go 1.12 or newer.
import "github.com/allegro/bigcache"
cache, _ := bigcache.NewBigCache(bigcache.DefaultConfig(10 * time.Minute))
cache.Set("my-unique-key", []byte("value"))
entry, _ := cache.Get("my-unique-key")
fmt.Println(string(entry))When cache load can be predicted in advance then it is better to use custom initialization because additional memory allocation can be avoided in that way.
import (
"log"
"github.com/allegro/bigcache"
)
config := bigcache.Config {
// number of shards (must be a power of 2)
Shards: 1024,
// time after which entry can be evicted
LifeWindow: 10 * time.Minute,
// Interval between removing expired entries (clean up).
// If set to <= 0 then no action is performed.
// Setting to < 1 second is counterproductive — bigcache has a one second resolution.
CleanWindow: 5 * time.Minute,
// rps * lifeWindow, used only in initial memory allocation
MaxEntriesInWindow: 1000 * 10 * 60,
// max entry size in bytes, used only in initial memory allocation
MaxEntrySize: 500,
// prints information about additional memory allocation
Verbose: true,
// cache will not allocate more memory than this limit, value in MB
// if value is reached then the oldest entries can be overridden for the new ones
// 0 value means no size limit
HardMaxCacheSize: 8192,
// callback fired when the oldest entry is removed because of its expiration time or no space left
// for the new entry, or because delete was called. A bitmask representing the reason will be returned.
// Default value is nil which means no callback and it prevents from unwrapping the oldest entry.
OnRemove: nil,
// OnRemoveWithReason is a callback fired when the oldest entry is removed because of its expiration time or no space left
// for the new entry, or because delete was called. A constant representing the reason will be passed through.
// Default value is nil which means no callback and it prevents from unwrapping the oldest entry.
// Ignored if OnRemove is specified.
OnRemoveWithReason: nil,
}
cache, initErr := bigcache.NewBigCache(config)
if initErr != nil {
log.Fatal(initErr)
}
cache.Set("my-unique-key", []byte("value"))
if entry, err := cache.Get("my-unique-key"); err == nil {
fmt.Println(string(entry))
}-
LifeWindowis a time. After that time, an entry can be called dead but not deleted. -
CleanWindowis a time. After that time, all the dead entries will be deleted, but not the entries that still have life.
Three caches were compared: bigcache, freecache and map. Benchmark tests were made using an i7-6700K CPU @ 4.00GHz with 32GB of RAM on Ubuntu 18.04 LTS (5.2.12-050212-generic).
go version
go version go1.13 linux/amd64
cd caches_bench; go test -bench=. -benchmem -benchtime=4s ./... -timeout 30m
goos: linux
goarch: amd64
pkg: github.com/allegro/bigcache/v2/caches_bench
BenchmarkMapSet-8 12999889 376 ns/op 199 B/op 3 allocs/op
BenchmarkConcurrentMapSet-8 4355726 1275 ns/op 337 B/op 8 allocs/op
BenchmarkFreeCacheSet-8 11068976 703 ns/op 328 B/op 2 allocs/op
BenchmarkBigCacheSet-8 10183717 478 ns/op 304 B/op 2 allocs/op
BenchmarkMapGet-8 16536015 324 ns/op 23 B/op 1 allocs/op
BenchmarkConcurrentMapGet-8 13165708 401 ns/op 24 B/op 2 allocs/op
BenchmarkFreeCacheGet-8 10137682 690 ns/op 136 B/op 2 allocs/op
BenchmarkBigCacheGet-8 11423854 450 ns/op 152 B/op 4 allocs/op
BenchmarkBigCacheSetParallel-8 34233472 148 ns/op 317 B/op 3 allocs/op
BenchmarkFreeCacheSetParallel-8 34222654 268 ns/op 350 B/op 3 allocs/op
BenchmarkConcurrentMapSetParallel-8 19635688 240 ns/op 200 B/op 6 allocs/op
BenchmarkBigCacheGetParallel-8 60547064 86.1 ns/op 152 B/op 4 allocs/op
BenchmarkFreeCacheGetParallel-8 50701280 147 ns/op 136 B/op 3 allocs/op
BenchmarkConcurrentMapGetParallel-8 27353288 175 ns/op 24 B/op 2 allocs/op
PASS
ok github.com/allegro/bigcache/v2/caches_bench 256.257sWrites and reads in bigcache are faster than in freecache. Writes to map are the slowest.
go version
go version go1.13 linux/amd64
cd caches_bench; go run caches_gc_overhead_comparison.go
Number of entries: 20000000
GC pause for bigcache: 1.506077ms
GC pause for freecache: 5.594416ms
GC pause for map: 9.347015msgo version
go version go1.13 linux/arm64
cd caches_bench; go run caches_gc_overhead_comparison.go
Number of entries: 20000000
GC pause for bigcache: 22.382827ms
GC pause for freecache: 41.264651ms
GC pause for map: 72.236853ms
Test shows how long are the GC pauses for caches filled with 20mln of entries. Bigcache and freecache have very similar GC pause time.
You may encounter system memory reporting what appears to be an exponential increase, however this is expected behaviour. Go runtime allocates memory in chunks or 'spans' and will inform the OS when they are no longer required by changing their state to 'idle'. The 'spans' will remain part of the process resource usage until the OS needs to repurpose the address. Further reading available here.
BigCache relies on optimization presented in 1.5 version of Go (issue-9477).
This optimization states that if map without pointers in keys and values is used then GC will omit its content.
Therefore BigCache uses map[uint64]uint32 where keys are hashed and values are offsets of entries.
Entries are kept in bytes array, to omit GC again. Bytes array size can grow to gigabytes without impact on performance because GC will only see single pointer to it.
BigCache does not handle collisions. When new item is inserted and it's hash collides with previously stored item, new item overwrites previously stored value.
Both caches provide the same core features but they reduce GC overhead in different ways.
Bigcache relies on map[uint64]uint32, freecache implements its own mapping built on
slices to reduce number of pointers.
Results from benchmark tests are presented above. One of the advantage of bigcache over freecache is that you don’t need to know the size of the cache in advance, because when bigcache is full, it can allocate additional memory for new entries instead of overwriting existing ones as freecache does currently. However hard max size in bigcache also can be set, check HardMaxCacheSize.
This package also includes an easily deployable HTTP implementation of BigCache, which can be found in the server package.
Bigcache genesis is described in allegro.tech blog post: writing a very fast cache service in Go
BigCache is released under the Apache 2.0 license (see LICENSE)