hanwckf/bl-mt798x

Issues

• AX3000T刷入最新release的uboot后无法进入系统和uboot页面

  #88 opened 2 months ago by Pull256
  17

• mr3000d ciq的512M内存的 出现了nand混用的情况 目前的uboot不支持

  #105 opened 2 months ago by xiaomi1991
  0

• 关于 redmi-ax6000 在uboot下的刷机时间问题

  #104 opened 2 months ago by pipihu
  1

• 在 Gigadevice 的 360t7 设备上，无法正确初始化 nmbm

  #85 opened 4 months ago by diredocks
  5

• 换NAND后串口SYSTEM HALT问题请教

  #90 opened 2 months ago by CCMeta
  1

• 360T7 如何支持H5TC8G63AMR-PBA这样的1G的内存

  #96 opened 3 months ago by phoenixxie0
  1

• MT7981 不支持DDR4 2GB容量吗？

  #54 opened a year ago by chkai81
  3

• 请教u-boot启动后操作会出现Synchronous Abort的问题

  #84 opened 3 months ago by CCMeta
  1

• JDC百里的uboot编译失败

  #87 opened 3 months ago by ZqinKing
  2

• 无法刷入任何固件

  #76 opened 5 months ago by xyychenchen
  2

• 希望能支持DHCP

  #51 opened a year ago by MomenDomain
  3

• XDR608x能否支持驱动2.5G网口？

  #58 opened 4 months ago by seer300
  1

• 希望在release中一起提供各个bin包的md5值，以便使用者确认文件是否完整。We hope to provide the MD5 values for each .bin file in the release, so that users can verify the integrity of the files.

  #66 opened 8 months ago by FirstJavaMaster
  1

• wr30u重新插拔电源系统无法启动

  #49 opened a year ago by dingshaohua-com
  1

• CT3003 上 摁住 reset开机不能进入 uboot ui界面

  #72 opened 7 months ago by ptpt52
  2

• 求JDCloud-AX6000-百里，适配官方openwrt主线固件

  #69 opened 7 months ago by itq5
  0

• 能适配下磊科n60吗？

  #59 opened 10 months ago by wwwz251
  7

• AX3000T为什么在20240123的release中移除了multi-layout

  #52 opened a year ago by Pil0tXia
  7

• AX3000t restarting in loop

  #65 opened 9 months ago by pioalpha
  1

• 请求给rax3000m添加像wr30u那样的multi-layout uboot支持

  #47 opened a year ago by pcslide
  1

• GL.Inet MT3000

  #61 opened 10 months ago by kendi182
  0

• Xiaomi ax3000t restarted after shutdown

  #57 opened 10 months ago by Ser9ei
  0

• 希望能支持rax3000m_nand版本硬改256M闪存

  #56 opened a year ago by zikura88
  0

• Support MT7621/MT7622

  #55 opened a year ago by yeezyio
  0

• 请问旧版uboot可以在uboot界面内直接升级吗

  #48 opened a year ago by sunnyvGitHub
  4

• 请教大佬们，怎么升级 MR3000D CIq和JCG Q30 Pro 的Uboot？

  #37 opened a year ago by mitsukileung
  0

• 看到可以dhcp了 没更新啊

  #46 opened a year ago by lalasou
  0

• Enable net console

  #41 opened a year ago by skbeh
  0

• Is it possible to have a NMBM disabled variant of this uboot?

  #40 opened a year ago by skbeh
  1

• H3C NX30Pro 机型的uboot,属于什么分区类型,其否启用nmbm,对于immortalWrt固件,应该选择哪个版本的固件

  #39 opened a year ago by Mixlining
  1

• 用最新的openwrt源码编译后 运行出错，切换到其他主题正常，希望大佬回复

  #4 opened a year ago by 1441284434
  1

• [功能请求] [MT7986] 支持 Banana pi BPI-R3

  #32 opened a year ago by luxvliu
  0

• 可以增加个UBOOT模式 切换按钮不？

  #16 opened a year ago by iamyangyiok
  2

• 之前编译好的 uboot 2023 版怎么删了，是有 bug 吗？

  #24 opened a year ago by ningsibuqu
  0

• H3C NX30Pro 这个机型可以添加吗？

  #19 opened a year ago by hminid
  0

• Are Xiaomi router wr30u and Xiaomi router ax3000t compatible?

  #28 opened a year ago by CTCD
  1

• 请求更新小米 AX3000T 的uboot

  #29 opened a year ago by Xiaodu233
  0

• Does it support upgrade nand from 256mb to 512mb?

  #21 opened a year ago by DRCRecoveryData
  0

• 请教大佬，这个版本的uboot用TTL连接进控制台怎么才能在菜单处停止？按任意键停不了，硬件是rax3000m emmc版本

  #20 opened a year ago by jaove
  0

• 关于 failsafe webui 的IP地址变化的问题及相应的解决办法

  #18 opened a year ago by sempr
  1

• 在ubuntu 20.04下编译失败

  #11 opened a year ago by codercaizh
  4

• 怎么联系，有硬件适配需求

  #17 opened a year ago by Eric-168
  1

• rax3000m刷完最新的uboot之后，只有红灯和绿灯了，没有蓝灯了，正常开机后等默认是灭的，怎么办

  #9 opened a year ago by xxzj2012
  0

• 其他机型方便出多分区uboot吗？比如保有量最大的360T7

  #13 opened a year ago by ATang007ZH
  0

• MTD device 'nmbm0' not found

  #3 opened a year ago by happy42779
  6

• Questions regarding the flash layout

  #1 opened 2 years ago by Lorilandly
  0