/ethereum-2.0-validator-setup-guide

👨‍🏫 How to setup Ethereum 2.0 validator via dedicated server by OVHCloud ☁️

Creative Commons Zero v1.0 UniversalCC0-1.0

How to setup a fast and secure Ethereum 2.0 validator node with OVHcloud

Introduction

Ethereum 2.0 is the next step in the evolution of Ethereum. It brings with it many changes, including Proof-of-Stake, Sharding, new client implementations, new cryptography and more.

Be a validator

1. Prerequisites

1.1 Recommended Hardware Setup

  • Operating system: 64-bit Linux (i.e. Ubuntu 20.04 LTS Server or Desktop)
  • Processor: Quad core CPU, Intel Core i7–4770 (3,40 GHz / Cores: 4 Threads: 8) or AMD FX-8310 or better
  • Memory: 16GB DDR4 RAM or more
  • Storage: 2TB NVMe or more, IOPS: 10,000 (medium speed) and 16,000 (fast)
  • Internet: Broadband internet connections with speeds at least 10 Mbps without data limit.
  • Power: Reliable electrical power with uninterruptible power supply (UPS)
  • ETH balance: at least 32 ETH and some ETH for deposit transaction fees
  • Wallet: Metamask installed

1.2 Self-hosting vs. Dedicated Server by OVH

Having your own hardware First solution, buy equipment optimized for our needs and run it at home.

✅ Benefits ❌ Disadvantages
Cost optimization Electricity and internet suppliers reliability
Possibility of reselling the equipment Price of electricity
Optimal participation to decentralization Equipment maintenance
Physical security Risk of having unsuitable equipment

Using a dedicated server

✅ Benefits ❌ Disadvantages
Electrical, network, and hardware security Premium to pay
Upgradability Money invested is wasted
No additional cost on your electricity bill Less decentralization but mostly 99% up-time
Physical security Risk of having unsuitable equipment

Regarding physical security: https://docs.ovh.com/gb/en/dedicated/securing-a-dedicated-server/

1.3 Buy a dedicated server

Go to https://www.ovhcloud.com/en/bare-metal/prices/

image

Compare

image

Advance-1 gen2 for fast sync and Rise-1 for medium sync speed, you can decide

Note We have chosen Advance-1 Gen2 with 1Gbit/s unmetered, guaranteed traffic and enough disk space to keep up with the chain increase for a while.

image

Rent for 24 months and pay all upfront to earn in total 15% discount + free setup fee

image

It will take around 24h until the dedicated server is ready for setup

image

Note Price for an Advance-1 Gen2 Server 2816.47 € over 2 years
Monthly Price 117,35 €
Still profitable, at the current Ethereum price

https://www.stakingrewards.com/calculator/ Screenshot 2022-09-15 at 21 33 45

1.4 Initial Setup

Once you got an email regarding the successful creation of the server, go to your dedicated server dashboard and start the initial setup.
Go to: https://www.ovh.com/manager/#/dedicated/server/..

image

Install the preferred OS, via “Last operating system (OS) installed by OVHcloud”

Note Creating a server requires you to add an SSH Key, follow the guide https://docs.ovh.com/gb/en/dedicated/creating-ssh-keys-dedicated/

We recommend Ubuntu Server 20.04 LTS "Focal Fossa" - ubuntu2004-server 64 bit. In the last step you must set the SSH key and host name, before you are able to install the OS.

image

1.5 Architecture Overview

image

2. Hardening you node

2.1 Login via SSH to your server. Run the following command:

ssh ubuntu@162.19.19.1

2.2 Create a non-root user with sudo privileges. Run the following commands:

sudo useradd -m -s /bin/bash ethereum

Set the password for ethereum user

sudo passwd ethereum

Add ethereum to the sudo group

sudo usermod -aG sudo ethereum

2.3 Disable SSH password Authentication and Use SSH Keys only

The basic rules of hardening SSH are:

  • No password for SSH access (use private key)
  • Don't allow root to SSH (the appropriate users should SSH in, then su or sudo)
  • Use sudo for users so commands are logged
  • Log unauthorized login attempts (and consider software to block/ban users who try to access your server too many times, like fail2ban)
  • Lock down SSH to only the ip range your require (if you feel like it)

Transfer the public key to your remote node. Update keyname.pub appropriately.

ssh-copy-id -i $HOME/.ssh/keyname.pub ethereum@server.public.ip.address

Login with your new ethereum user

ssh ethereum@server.public.ip.address

Disable root login and password based login. Edit the /etc/ssh/sshd_config file

sudo nano /etc/ssh/sshd_config
Locate ChallengeResponseAuthentication and update to no
ChallengeResponseAuthentication no

Locate PasswordAuthentication update to no
PasswordAuthentication no

Locate PermitRootLogin and update to prohibit-password
PermitRootLogin prohibit-password

Locate PermitEmptyPasswords and update to no
PermitEmptyPasswords no

Locate Port and customize it your random port.
Use a random port # from 1024 thru 49141. Check for possible conflicts.

Port <port number>

Validate the syntax of your new SSH configuration.

sudo sshd -t

If no errors with the syntax validation, restart the SSH process

sudo systemctl restart sshd

Verify the login still works and login with ssh

ssh ethereum@server.public.ip.address -p <custom port number>

2.4 Update your system

It's critically important to keep your system up-to-date with the latest patches to prevent intruders from accessing your system.

sudo apt-get update -y && sudo apt dist-upgrade -y
sudo apt-get autoremove
sudo apt-get autoclean

Enable automatic updates so you don't have to manually install them.

sudo apt-get install unattended-upgrades 
sudo dpkg-reconfigure -plow unattended-upgrades

2.5 Disable root account

System admins should not frequently log in as root in order to maintain server security. Instead, you can use sudo execute that require low-level privileges.

# To disable the root account, simply use the -l option.
sudo passwd -l root
# If for some valid reason you need to re-enable the account, simply use the -u option.
sudo passwd -u root

2.6 Secure Shared Memory

One of the first things you should do is secure the shared memory used on the system. If you're unaware, shared memory can be used in an attack against a running service. Because of this, secure that portion of system memory.

Edit /etc/fstab

sudo nano /etc/fstab

Insert the following line to the bottom of the file and save/close. This sets shared memory into read-only mode.

tmpfs    /run/shm    tmpfs    ro,noexec,nosuid    0 0

Reboot the node in order for changes to take effect.

sudo reboot

2.7 Install Fail2ban

Fail2ban is an intrusion-prevention system that monitors log files and searches for particular patterns that correspond to a failed login attempt. If a certain number of failed logins are detected from a specific IP address (within a specified amount of time), fail2ban blocks access from that IP address.

sudo apt-get install fail2ban -y

Edit a config file that monitors SSH logins.

sudo nano /etc/fail2ban/jail.local

Add the following lines to the bottom of the file.

Whitelisting IP address tip: The ignoreip parameter accepts IP addresses, IP ranges or DNS hosts that you can specify to be allowed to connect. This is where you want to specify your local machine, local IP range or local domain, separated by spaces.
# Example
ignoreip = 192.168.1.0/24 127.0.0.1/8

[sshd]
enabled = true
port = <22 or your random port number>
filter = sshd
logpath = /var/log/auth.log
maxretry = 3
# whitelisted IP addresses
ignoreip = <list of whitelisted IP address, your local daily laptop/pc>

Save/close file.

Restart fail2ban for settings to take effect.

sudo systemctl restart fail2ban

2.8 Configure your Firewall

The standard UFW firewall can be used to control network access to your node. With any new installation, ufw is disabled by default. Enable it with the following settings.

Prysm

# By default, deny all incoming and outgoing traffic
sudo ufw default deny incoming
sudo ufw default allow outgoing
# Allow ssh access
sudo ufw allow ssh #<port 22 or your random ssh port number>/tcp
# Allow p2p ports
sudo ufw allow 13000/tcp
sudo ufw allow 12000/udp
# Allow eth1 port
sudo ufw allow 30303/tcp
sudo ufw allow 30303/udp
# Enable firewall
sudo ufw enable

Note It is dangerous to open 3000 / 9090 for Grafana or Prometheus on a VPS/cloud node.

2.9 Verify Listening Ports

If you want to maintain a secure server, you should validate the listening network ports every once in a while. This will provide you essential information about your network.

sudo ss -tulpn or sudo netstat -tulpn

Note Further tips can be found here: https://www.ubuntupit.com/best-linux-hardening-security-tips-a-comprehensive-checklist/

3. Initial Setup

3.1 Time Sync Check

Run the following command:

timedatectl 

✅ Check if NTP Service is active.
✅ Check if Local time, Time zone, and Universal time are all correct.
✅ If NTP Service is not active, run:

sudo timedatectl set-ntp on 

If you see error message Failed to set ntp: NTP not supported, you may need to install chrony or ntp package.

Note by default, VMs may disable NTP so you may need to find a work-around for your environment.

3.2 Create a jwtsecret file

A jwtsecret file contains a hexadecimal string that is passed to both Execution Layer client and Consensus Layer clients, and is used to ensure authenticated communications between both clients.

#store the jwtsecret file at /secrets
sudo mkdir -p /secrets
#create the jwtsecret file
openssl rand -hex 32 | tr -d "\n" | sudo tee /secrets/jwtsecret
#enable read access
sudo chmod 644 /secrets/jwtsecret

3.3 Install Execution Client

To process incoming validator deposits from the execution layer (formerly 'Eth1' chain), you'll need to run an execution client as well as your consensus client (formerly 'Eth2'). You can use a third-party service like Infura, but we recommend running your own client to keep the network as decentralized as possible. Go Ethereum is one of the three original implementations (along with C++ and Python) of the Ethereum protocol. It is written in Go, fully open source and licensed under the GNU LGPL v3.

image

Client Type CPU Usage Minimum RAM Usage Sync Time
Geth Full Moderate 4 GB Moderate
Besu Full Moderate 8 GB Slow
Nethermind Full Moderate 16 GB Fast

We have chosen Geth, as it’s the most stable and used client.

The easiest way to install Geth on Ubuntu-based distributions is with the built-in launchpad PPAs (Personal Package Archives). A single PPA repository is provided, containing stable and development releases for Ubuntu versions xenial, trusty, impish, focal, bionic.

sudo add-apt-repository -y ppa:ethereum/ethereum
sudo apt-get update -y
sudo apt-get install ethereum -y

Setup and configure systemd

Run the following to create a unit file to define your eth1.service configuration. Simply copy/paste the following.

cat > $HOME/eth1.service << EOF
[Unit]
Description=Geth Execution Layer Client service
Wants=network-online.target
After=network-online.target
[Service]
Type=simple
User=$USER
Restart=on-failure
RestartSec=3
TimeoutSec=300
ExecStart=/usr/bin/geth \
--mainnet \
--metrics \
--pprof \
--authrpc.jwtsecret=/secrets/jwtsecret
[Install]
WantedBy=multi-user.target
EOF

Move the unit file to /etc/systemd/system and give it permissions.

sudo mv $HOME/eth1.service /etc/systemd/system/eth1.service
sudo chmod 644 /etc/systemd/system/eth1.service

Run the following to enable auto-start at boot time.

sudo systemctl daemon-reload
sudo systemctl enable eth1

Start geth

sudo systemctl start eth1

When is my geth node synched?

Your execution client is fully sync'd when these events occur. Geth: Imported new chain segment

  1. Attach to the geth console with: geth attach
  2. Type the following: eth.syncing
  3. If it returns false, your geth node is synched.

To view and follow eth1 logs

journalctl -fu eth1

Note With OVHCloud Dedicated Server Advance-1 we got a sync after 6 hours. Syncing an execution client can take up to 1 week. On high-end machines with gigabit internet, expect syncing to take less than a day.

3.4 Generate your validator keys

install the Ethereum Foundation deposit tool and generate your two sets of key pairs.

You have the choice of downloading the pre-built Ethereum staking deposit tool or building it from source. Alternatively, if you have a Ledger Nano X/S or Trezor Model T, you're able to generate deposit files with keys managed by a hardware wallet.

If using staking-deposit-cli, follow the prompts and pick a KEYSTORE password. This password encrypts your keystore files. Write down your mnemonic and keep this safe and offline.

Visit and choose your operating system to generate the keys OFFLINE https://github.com/ethereum/staking-deposit-cli Follow the CLI commands Picture 1

If you’re successfully done, you will see the rhino! image

Note Everything is now saved within the validator_keys folders, keep them as you will need the files in the next step.

3.5 Install Consensus Client

Client Type CPU Usage Minimum RAM Usage Sync Time
Geth Full Moderate 4 GB Moderate
Besu Full Moderate 8 GB Slow
Nethermind Full Moderate 16 GB Fast

Install Prysm

mkdir ~/prysm && cd ~/prysm
curl https://raw.githubusercontent.com/prysmaticlabs/prysm/master/prysm.sh --output prysm.sh && chmod +x prysm.sh

Configure port forwarding and/or firewall

Specific to your networking setup or cloud provider settings, ensure your validator's firewall ports are open and reachable.

  • Prysm consensus client will use port 12000 for udp and port 13000 for tcp
  • Execution client requires port 30303 for tcp and udp

Note You'll need to forward and open ports to your validator. Verify it's working with https://www.yougetsignal.com/tools/open-ports/ or https://canyouseeme.org/ .

Import validator key

$HOME/prysm/prysm.sh validator accounts import --mainnet --keys-dir=$HOME/staking-deposit-cli/validator_keys
  • Type "accept" to accept terms of use
  • Press enter to accept default wallet location
  • Enter a new prysm-only password to encrypt your local prysm wallet files
  • and enter the keystore password for your imported accounts.

Verify your validators imported successfully.

$HOME/prysm/prysm.sh validator accounts list --mainnet

3.6 Start the beacon chain

Setup systemd service

Create a systemd unit file to define yourbeacon-chain.service configuration.

sudo nano /etc/systemd/system/beacon-chain.service

Paste the following configuration into the file.

# The eth beacon chain service (part of systemd)
# file: /etc/systemd/system/beacon-chain.service

[Unit]
Description=eth consensus layer beacon chain service
Wants=network-online.target
After=network-online.target

[Service]
Type=simple
User=<USER>
Restart=on-failure
ExecStart=<HOME>/prysm/prysm.sh beacon-chain \
  --mainnet \
  --checkpoint-sync-url=https://beaconstate.info \
  --genesis-beacon-api-url=https://beaconstate.info \
  --execution-endpoint=http://localhost:8551 \
  --jwt-secret=/secrets/jwtsecret \
  --suggested-fee-recipient=0x_CHANGE_THIS_TO_MY_ETH_FEE_RECIPIENT_ADDRESS \
  --accept-terms-of-use

[Install]
WantedBy=multi-user.target

Replace0x_CHANGE_THIS_TO_MY_ETH_FEE_RECIPIENT_ADDRESS with your own Ethereum address that you control. Tips are sent to this address and are immediately spendable, unlike the validator's attestation and block proposal rewards. To exit and save, press Ctrl + X, then Y, thenEnter. Update the configuration file with your current user's home path and user name.

sudo sed -i /etc/systemd/system/beacon-chain.service -e "s:<HOME>:${HOME}:g"
sudo sed -i /etc/systemd/system/beacon-chain.service -e "s:<USER>:${USER}:g"

Update file permissions.

sudo chmod 644 /etc/systemd/system/beacon-chain.service

Run the following to enable auto-start at boot time and then start your beacon node service.

sudo systemctl daemon-reload
sudo systemctl enable beacon-chain
sudo systemctl start beacon-chain

3.7 Start the validator

Store your prysm-only password in a file and make it read-only. This is required so that Prysm can decrypt and load your validators.

Replace <my_password_goes_here> with your prysm-only password.

echo '<my_password_goes_here>' > $HOME/.eth2validators/validators-password.txt
sudo chmod 600 $HOME/.eth2validators/validators-password.txt

Verify your password is correct.

cat $HOME/.eth2validators/validators-password.txt

Clear the bash history in order to remove traces of your prysm-only password.

shred -u ~/.bash_history && touch ~/.bash_history

Setup systemd service Create a systemd unit file to define your validator.service configuration.

sudo nano /etc/systemd/system/validator.service

Paste the following configuration into the file.

# The eth validator service (part of systemd)
# file: /etc/systemd/system/validator.service
[Unit]
Description=eth validator service
Wants=network-online.target beacon-chain.service
After=network-online.target
[Service]
Type=simple
User=<USER>
Restart=on-failure
ExecStart=<HOME>/prysm/prysm.sh validator \
--mainnet \
--graffiti "<MY_GRAFFITI>" \
--accept-terms-of-use \
--wallet-password-file <HOME>/.eth2validators/validators-password.txt \
--suggested-fee-recipient 0x_CHANGE_THIS_TO_MY_ETH_FEE_RECIPIENT_ADDRESS \
--enable-doppelganger
[Install]
WantedBy=multi-user.target
  • Replace0x_CHANGE_THIS_TO_MY_ETH_FEE_RECIPIENT_ADDRESS with your own Ethereum address that you control. Tips are sent to this address and are immediately spendable, unlike the validator's attestation and block proposal rewards.
  • Replace <MY_GRAFFITI> with your own graffiti message. However for privacy and opsec reasons, avoid personal information. Optionally, leave it blank by deleting the flag option.

To exit and save, press Ctrl + X, then Y, thenEnter.

Update the configuration file with your current user's home path and user name.

sudo sed -i /etc/systemd/system/validator.service -e "s:<HOME>:${HOME}:g"
sudo sed -i /etc/systemd/system/validator.service -e "s:<USER>:${USER}:g"

Update file permissions.

sudo chmod 644 /etc/systemd/system/validator.service

Run the following to enable auto-start at boot time and then start your validator.

sudo systemctl daemon-reload
sudo systemctl enable validator
sudo systemctl start validator

#view and follow the log

journalctl --unit=beacon-chain -f

image

#view and follow the log

journalctl --unit=validator -f

image

4. Monitoring your validator

Prometheus is a monitoring platform that collects metrics from monitored targets by scraping metrics HTTP endpoints on these targets. Official documentation is available here. Grafana is a dashboard used to visualize the collected data.

4.1 Install prometheus and prometheus node exporter.

sudo apt-get install -y prometheus prometheus-node-exporter

4.2. Install grafana.

wget -q -O - https://packages.grafana.com/gpg.key | sudo apt-key add -
echo "deb https://packages.grafana.com/oss/deb stable main" > grafana.list
sudo mv grafana.list /etc/apt/sources.list.d/grafana.list
sudo apt-get update && sudo apt-get install -y grafana

Enable services so they start automatically.

sudo systemctl enable grafana-server.service prometheus.service prometheus-node-exporter.service

Create the prometheus.yml config file. Choose the tab for your eth client. Simply copy and paste.

cat > $HOME/prometheus.yml << EOF
global:
  scrape_interval:     15s # By default, scrape targets every 15 seconds.

  # Attach these labels to any time series or alerts when communicating with
  # external systems (federation, remote storage, Alertmanager).
  external_labels:
    monitor: 'codelab-monitor'

# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
   - job_name: 'node_exporter'
     static_configs:
       - targets: ['localhost:9100']
   - job_name: 'validator'
     static_configs:
       - targets: ['localhost:8081']
   - job_name: 'beacon node'
     static_configs:
       - targets: ['localhost:8080']
   - job_name: 'slasher'
     static_configs:
       - targets: ['localhost:8082']
EOF

Setup prometheus for your execution client. Start by editing prometheus.yml

nano $HOME/prometheus.yml

Append the applicable job snippet for your execution client to the end of prometheus.yml. Save the file.

   - job_name: 'geth'
     scrape_interval: 15s
     scrape_timeout: 10s
     metrics_path: /debug/metrics/prometheus
     scheme: http
     static_configs:
     - targets: ['localhost:6060']

Move it to /etc/prometheus/prometheus.yml

sudo mv $HOME/prometheus.yml /etc/prometheus/prometheus.yml

Update file permissions.

sudo chmod 644 /etc/prometheus/prometheus.yml

Finally, restart the services.

sudo systemctl restart grafana-server.service prometheus.service prometheus-node-exporter.service

Verify that the services are running properly:

sudo systemctl status grafana-server.service prometheus.service prometheus-node-exporter.service

Note It is dangerous to open 3000 / 9090 for Grafana or Prometheus on a VPS/cloud node. Better to connect via wireguard to the server or setup between monitoring server and node a wireguard ssh connection https://www.digitalocean.com/community/tutorials/how-to-set-up-wireguard-on-ubuntu-20-04

5. Maintenance

5.1 Updating your consensus client

Recommended to watch the following repository https://github.com/prysmaticlabs/prysm/releases

#Simply restart the processes

sudo systemctl reload-or-restart beacon-chain validator

Check the logs to verify the services are working properly and ensure there are no errors.

sudo systemctl status beacon-chain validator
sudo systemctl status beacon-chain

5.2 Updating your execution client

Stop your execution client process. This can take a few minutes.

sudo systemctl stop eth1

Update the execution client package or binaries.

sudo apt update
sudo apt dist-upgrade -y

Check the logs to verify the services are working properly and ensure there are no errors.

sudo systemctl status eth1 beacon-chain validator
sudo systemctl status eth1 beacon-chain

6. Signing up to be a validator

To be an ETH 2.0 validator, one has to make a deposit through the launchpad’s website.

https://launchpad.ethereum.org/en/overview

6.1 Check all steps before connecting to the launchpad with your Metamask wallet, review and accept terms.

Screenshot 2022-09-15 at 21 15 33

6.2 Deposit your validator amount

image

image

image

6.3 Follow the status on beaconcha.in

image

🎉 You are now officially an Ethereum 2.0 validator, congrats! 🎉

7. Validator duties

A validators is required to

  • propose new blocks on shards to which the validator is assigned.
  • Participate in committees by signing attestations on blocks proposed by other validators within the committee.
  • Aggregrate attestations from other validators on a committee when assigned for broadcasting to the beacon chain.
  • Maintain an RPC connection to a trusted beacon node to listen for validator assignment/shuffling.
  • Sync assigned shard with beacon chain for each proof of custody period.

Resources

Knowledge Base Links to aggregators of knowledge with additional information on topics above and more
Ethereum 2.0 block explorers
Validator stats
Ethereum 2.0 client implementations
Useful links