hardwario/lora-modem

Issues

• ABP Frame Counter slow writing?

  #145 opened 2 months ago by fuma01
  3

• First UTX after reset does not reply +OK

  #144 opened 4 months ago by jpbaltazar
  2

• Check power consumption with AT$ASYNC=0

  #142 opened 5 months ago by janakj
  1

• Device address not set after AT+JOIN

  #143 opened 5 months ago by jpbaltazar
  1

• AppEUI reset to 0 on region change

  #133 opened 5 months ago by janakj
  0

• Check that all ATCI writes happen from the main thread

  #140 opened 5 months ago by janakj
  1

• Check TX buffer overrun behavior

  #141 opened 7 months ago by janakj
  0

• Consider time synchronization piggybacking

  #136 opened a year ago by janakj
  0

• Add support for empty uplink payloads

  #97 opened 2 years ago by janakj
  0

• Better leap second handling in Python library

  #137 opened a year ago by janakj
  0

• Add support for AT$DEVTIME to the Python library

  #134 opened a year ago by janakj
  0

• Adjust time returned by AT$DEVTIME to include the UART transmission time

  #135 opened a year ago by janakj
  0

• Default delay values

  #130 opened a year ago by ctorney
  4

• AT+APPKEY not saved to EEPROM in >= 1.3.0

  #132 opened a year ago by janakj
  0

• Modem firmware update by bcf command

  #131 opened a year ago by zokl
  4

• Conflict between LPUART1 and USART2 GPIOs in MKRWAN1310 builds

  #124 opened a year ago by janakj
  0

• Invoke low-power Stop when LPUART1 is detached

  #126 opened a year ago by janakj
  0

• Trigger full rebuild on a change in build options

  #125 opened a year ago by janakj
  0

• Create more firmware build variants

  #127 opened a year ago by janakj
  0

• Update the list of error codes in the Python library

  #129 opened a year ago by janakj
  0

• Document AT$DETACH

  #128 opened a year ago by janakj
  1

• Add AT command to disconnect LPUART

  #119 opened a year ago by janakj
  0

• Check if resetting DevEUI via `AT+FACNEW 3` works correctly

  #123 opened 2 years ago by janakj
  0

• Build releases in a temporary directory

  #105 opened 2 years ago by janakj
  0

• Upgrade LoRaMac-node to 4.7.0

  #122 opened 2 years ago by janakj
  0

• Protection for LoRaWAN security keys in EEPROM

  #121 opened 2 years ago by janakj
  1

• Include AT+REP and AT+RTYNUM values in the output of the Python tool

  #120 opened 2 years ago by janakj
  0

• Feature request - add put/get command to store data in NVM

  #116 opened 2 years ago by disk91
  7

• Uplink retransmission control

  #118 opened 2 years ago by janakj
  0

• Link check requests are being retransmitted

  #115 opened 2 years ago by jefrin-dev
  2

• How to use Class C

  #114 opened 2 years ago by disk91
  3

• lom204

  #111 opened 2 years ago by tcpipchip
  4

• Wisol

  #110 opened 2 years ago by tcpipchip
  13

• MKRWAN1310 not able to join network in US915

  #107 opened 2 years ago by jefrin-dev
  18

• Use with MKR1310 - no radio signal

  #108 opened 2 years ago by disk91
  8

• Release multiple binary firmware variants

  #109 opened 2 years ago by janakj
  0

• How to flash firmware in MKRWAN1310 boards

  #106 opened 2 years ago by jefrin-dev
  3

• Describe +RECV and other asynchronous notifications

  #100 opened 2 years ago by janakj
  0

• Reset session keys on counter reset

  #101 opened 2 years ago by janakj
  0

• Update NVM data structure sizes

  #104 opened 2 years ago by janakj
  0

• Add support for case-insensitive AT commands

  #99 opened 2 years ago by janakj
  1

• Terminate +RECV payload with CRLF

  #102 opened 2 years ago by janakj
  1

• Check parameter error codes

  #103 opened 2 years ago by janakj
  0

• Check if +ACK/+NOACK is always sent

  #98 opened 2 years ago by janakj
  0

• Add source tarball to release files

  #93 opened 2 years ago by janakj
  0

• Show dwell time in the Python tool

  #95 opened 2 years ago by janakj
  0

• Support 9-byte channel masks in AT+CHMASK

  #96 opened 2 years ago by janakj
  0

• Return compatibility build date in AT+VER

  #94 opened 2 years ago by janakj
  0

• Modem reports busy when duty cycling kicks in during AT+JOIN

  #92 opened 2 years ago by janakj
  0

• Implement AT+MCAST

  #91 opened 2 years ago by janakj
  0