Egress-Assess is a tool used to test egress data detection capabilities.
To setup, run the included setup script, or perform the following:
- Install pyftpdlib
- Generate a server certificate and store it as "server.pem" on the same level as Egress-Assess. This can be done with the following command:
openssl req -new -x509 -keyout server.pem -out server.pem -days 365 -nodes
Blog posts are available here:
- https://www.christophertruncer.com/egress-assess-testing-egress-data-detection-capabilities/
- https://www.christophertruncer.com/egress-assess-action-via-powershell/
Typical use case for Egress-Assess is to copy this tool in two locations. One location will act as the server, the other will act as the client. Egress-Assess can send data over FTP, HTTP, and HTTPS.
To extract data over FTP, you would first start Egress-Assess’s FTP server by selecting “--server ftp” and providing a username and password to use:
./Egress-Assess.py --server ftp --username testuser --password pass123
Now, to have the client connect and send data to the ftp server, you could run...
./Egress-Assess.py --client ftp --username testuser --password pass123 --ip 192.168.63.149 --datatype ssn
Also, you can setup Egress-Assess to act as a web server by running....
./Egress-Assess.py --server https
Then, to send data to the FTP server, and to specifically send 15 megs of credit card data, run the following command...
./Egress-Assess.py --client https --data-size 15 --ip 192.168.63.149 --datatype cc