OpenShift Automated User-Provided Infrastructure
Preparing infrastructure for OpenShift 4 installation by hand is a rather tedious job. In order to save the effort, openshift-auto-upi provides a set of Ansible scripts that automate the infrastructure creation.
openshift-auto-upi is a separate tool, and is not in any way part of the OpenShift product. It enhances the openshift-installer by including automation for the following:
openshift-auto-upi comes with Ansible roles to provision OpenShift cluster hosts on the following target platforms:
openshift-auto-upi comes with Ansible roles to provision and configure:
Note that the infrastructure from the above list provisioned using openshift-auto-upi is NOT meant for production use. It is meant to be a temporary fill in for your missing production-grade infrastructure. Using openshift-auto-upi to provision any of the infrastructure from the above list is optional.
Some of the features offered by openshift-auto-upi:
- Network configuration via DHCP or static IPs
- User has full control over the
install-config.yaml
file and can customize it according to her/his needs. - User can customize ignition config files using filetranspiler and jsonpatch, see also Customizing Ignition Configs
- Ignition config files are protected from being overwritten, see also Ignition Config Protection
- Automated download of CoreOS images from Red Hat sites and upload onto the target platform
- Automated bare metal installation, control of remote machines using BMC
- Adding nodes to the existing cluster is supported and documented
openshift-auto-upi
won't touch the existing nodes. It doesn't even trust the Ansible modules to not modify the existing nodes. Instead, it skips existing nodes altogether for maximum safety.
openshift-auto-upi is great for situations where the official IPI installation method is not flexible enough and on the other hand the UPI installation is too tedious.
Deployment Overview
- Helper host is a (virtual) machine that you must provide. It is a helper machine from which you will run openshift-auto-upi Ansible scripts. Any provisioned infrastructure (DHCP, DNS server, ...) will also be installed on the Helper host by default.
- Helper host requires access to the Internet.
- It is stronly discouraged to use openshift-auto-upi to provision infrastructure components on a bastion host. Services provisioned by openshift-auto-upi are not meant to be exposed to the public Internet.
- If your goal is to deploy OpenShift on your laptop, you can run the openshift-auto-upi directly on your laptop and use the local Libvirt as your target platform.
- OpenShift hosts will be provisioned for you by openshift-auto-upi unless your target platform is bare metal.
Networking
openshift-auto-upi assumes that OpenShift hosts are assigned fixed IP addresses. This is accomplished by pairing the hosts MAC addresses with IP addresses in the DHCP server configuration. DHCP server then always assigns the same IP address to a specific host.
Note that in order to use DHCP and/or PXE server installed on the Helper host, the Helper host and all of the OpenShift hosts have to be provisioned on the same layer 2 network. In the opposite case, it is sufficient to have a working IP route between the Helper host and the OpenShift hosts.
If the DNS server is managed by openshift-auto-upi, a DNS name will be created for each OpenShift host. These DNS names follow the scheme:
<hostname>.<cluster_name>.<base_domain>
Note that these names are created only for your convenience. openshift-auto-upi doesn't rely on their existence as they are not required for installing OpenShift.
Using Static IPs
If you prefer configuring your OpenShift hosts using static IPs as opposed to leveraging the default DHCP provisioning, openshift-auto-upi allows you to do that. Note that Static IPs feature is currently implemented for bare metal, Libvirt PXE, oVirt, and vSphere target platforms. Static IPs for Libvirt FwCfg is not implemented at this time.
While you are configuring openshift-auto-upi (detailed information in the following sections), add your network configuration (gateway, netmask, name servers) to the static_ips section of the openshift_install_config.yml file:
$ cp inventory/group_vars/all/openshift_install_config.yml.sample \
inventory/group_vars/all/openshift_install_config.yml
$ vi inventory/group_vars/all/openshift_install_config.yml
Remember to set the variable static_ips.enabled=True in the same file. You are all set! openshift-auto-upi will configure your OpenShift nodes using static IPs.
For further information on the design of the Static IPs feature, you can refer to OpenShift UPI using static IPs.
Platform-Specific Documentation
Installing OpenShift on Libvirt
Deployment Playbooks
The table below depicts the openshift-auto-upi Ansible playbooks that you need to execute in order to deploy OpenShift on select target platform. You want to execute the Ansible playbooks in the order from top to bottom.
Bare metal | Libvirt FwCfg | Libvirt PXE | oVirt | vSphere | |
---|---|---|---|---|---|
mirror_registry | optional | optional | optional | optional | optional |
clients | required | required | required | required | required |
dhcp_server | optional | optional | optional | optional | optional |
dns_server | optional | optional | optional | optional | optional |
pxe_server | required | - | required | - | - |
web_server | required | - | required | - | - |
loadbalancer | optional | optional | optional | optional | optional |
dns_client | optional | optional | optional | optional | optional |
Following sections describe the installation process in more detail.
Setting Up Helper Host
There are two options to create a Helper host:
- Create a Helper host virtual machine. Minimum recommended Helper host machine size is 1 vCPU, 4 GB RAM, and 10 GB disk space. You have to install one of the supported operating systems on this machine.
- If you run one of the supported operating system on an existing machine, you can use that machine as your Helper host.
Supported operating systems for the Helper host are:
- Red Hat Enterprise Linux 7
- Red Hat Enterprise Linux 8
- Fedora release >= 31
Before continuing with the next steps, make sure that you applied the OS-specific configuration instructions.
$ yum install git
$ yum install ansible
Clone the openshift-auto-upi repo to your Helper host and check out a tagged release. I recommend that you use a tagged release which receives more testing than master:
$ git clone https://github.com/noseka1/openshift-auto-upi.git
$ git checkout <release_tag>
$ cd openshift-auto-upi
Creating Mirror Registry
If you are installing OpenShift in a restricted network, you will need to create a local mirror registry. This registry will contain all OpenShift container images required for the installation. openshift-auto-upi automates the creation of the mirror registry by implementing the steps described in the Creating a mirror registry. To set up a mirror registry:
$ cp inventory/group_vars/all/infra/mirror_registry.yml.sample \
inventory/group_vars/all/infra/mirror_registry.yml
$ vi inventory/group_vars/all/infra/mirror_registry.yml
$ ansible-playbook mirror_registry.yml
Preparing for OpenShift Installation
Create custom openshift_install_config.yml configuration:
$ cp inventory/group_vars/all/openshift_install_config.yml.sample \
inventory/group_vars/all/openshift_install_config.yml
$ vi inventory/group_vars/all/openshift_install_config.yml
Create custom openshift_cluster_hosts.yml configuration:
$ cp inventory/group_vars/all/openshift_cluster_hosts.yml.sample \
inventory/group_vars/all/openshift_cluster_hosts.yml
$ vi inventory/group_vars/all/openshift_cluster_hosts.yml
Download OpenShift clients using Ansible:
$ ansible-playbook clients.yml
Installing DHCP Server
Note that dnsmasq.yml configuration file is shared between the DHCP, DNS, and PXE servers.
$ cp inventory/group_vars/all/infra/dnsmasq.yml.sample inventory/group_vars/all/infra/dnsmasq.yml
$ vi inventory/group_vars/all/infra/dnsmasq.yml
$ cp inventory/group_vars/all/infra/dhcp_server.yml.sample inventory/group_vars/all/infra/dhcp_server.yml
$ vi inventory/group_vars/all/infra/dhcp_server.yml
Provision DHCP server on the Helper host using Ansible:
$ ansible-playbook dhcp_server.yml
Installing DNS Server
Note that dnsmasq.yml configuration file is shared between the DHCP, DNS, and PXE servers.
$ cp inventory/group_vars/all/infra/dnsmasq.yml.sample inventory/group_vars/all/infra/dnsmasq.yml
$ vi inventory/group_vars/all/infra/dnsmasq.yml
$ cp inventory/group_vars/all/infra/dns_server.yml.sample inventory/group_vars/all/infra/dns_server.yml
$ vi inventory/group_vars/all/infra/dns_server.yml
Provision DNS server on the Helper host using Ansible:
$ ansible-playbook dns_server.yml
Installing PXE Server
PXE server can be used for booting OpenShift hosts when installing on bare metal or libvirt target platform. Installation on vSphere doesn't use PXE boot at all.
Note that dnsmasq.yml configuration file is shared between the DHCP, DNS, and PXE servers.
$ cp inventory/group_vars/all/infra/dnsmasq.yml.sample inventory/group_vars/all/infra/dnsmasq.yml
$ vi inventory/group_vars/all/infra/dnsmasq.yml
Provision PXE server on the Helper host using Ansible:
$ ansible-playbook pxe_server.yml
Installing Web Server
Web server is used to host installation artifacts such as ignition files and machine images. You can provision a Web server on the Helper host using Ansible:
$ ansible-playbook web_server.yml
Installing Load Balancer
Provision load balancer on the Helper host using Ansible:
$ ansible-playbook loadbalancer.yml
Configuring DNS Client
If you used openshift-auto-upi to deploy a DNS server, you may want to configure the Helper host to resolve OpenShift host names using this DNS server:
$ cp inventory/group_vars/all/infra/dns_client.yml.sample inventory/group_vars/all/infra/dns_client.yml
$ vi inventory/group_vars/all/infra/dns_client.yml
Configure the NetworkManager on the Helper host to forward OpenShift DNS queries to the local DNS server. Note that this playbook will issue systemctl NetworkManager restart
to apply the configuration changes.
$ ansible-playbook dns_client.yml
Installing OpenShift
Installing OpenShift on Bare Metal
Create your install-config.yaml
file:
$ cp files/common/install-config.yaml.sample files/common/install-config.yaml
$ vi files/common/install-config.yaml
Kick off the OpenShift installation by issuing the command:
$ ansible-playbook openshift_baremetal.yml
Installing OpenShift on Libvirt
Create custom libvirt.yml configuration:
$ cp inventory/group_vars/all/infra/libvirt.yml.sample inventory/group_vars/all/infra/libvirt.yml
$ vi inventory/group_vars/all/infra/libvirt.yml
Create your install-config.yaml
file:
$ cp files/common/install-config.yaml.sample files/common/install-config.yaml
$ vi files/common/install-config.yaml
In order to install OpenShift using the Libvirt FwCfg method, kick off the installation by issuing the command:
$ ansible-playbook openshift_libvirt_fwcfg.yml
Alternatively, in order to install OpenShift using the Libvirt PXE method, kick off the installation by issuing the command:
$ ansible-playbook openshift_libvirt_pxe.yml
Installing OpenShift on oVirt
Create custom ovirt.yml configuration:
$ cp inventory/group_vars/all/infra/ovirt.yml.sample inventory/group_vars/all/infra/ovirt.yml
$ vi inventory/group_vars/all/infra/ovirt.yml
Create your install-config.yaml
file:
$ cp files/common/install-config.yaml.sample files/common/install-config.yaml
$ vi files/common/install-config.yaml
Kick off the OpenShift installation by issuing the command:
$ ansible-playbook openshift_ovirt.yml
Installing OpenShift on vSphere
Create custom vsphere.yml configuration:
$ cp inventory/group_vars/all/infra/vsphere.yml.sample inventory/group_vars/all/infra/vsphere.yml
$ vi inventory/group_vars/all/infra/vsphere.yml
Create your install-config.yaml
file:
$ cp files/common/install-config.yaml.sample files/common/install-config.yaml
$ vi files/common/install-config.yaml
Kick off the OpenShift installation by issuing the command:
$ ansible-playbook openshift_vsphere.yml
Adding Cluster Nodes
Add the new hosts to the list of cluster hosts:
$ vi inventory/group_vars/all/openshift_cluster_hosts.yml
If you are adding infra hosts and you use the load balancer managed by openshift-auto-upi, refresh the load balancer configuration by re-running the Ansible playbook:
$ ansible-playbook loadbalancer.yml
Re-run the platform-specific playbook to install the new cluster hosts:
$ ansible-playbook openshift_<baremetal|libvirt_fwcfg|libvirt_pxe|ovirt|vsphere>.yml
To allow the new nodes to join the cluster, you may need to sign their CSRs:
$ oc get csr
$ oc adm certificate approve <name>
openshift-auto-upi Development
TODO List
Refer to the openshift-auto-upi project board
Development Notes
- IPMI can be tested on virtual machines using VirtualBMC
- Check Ansible code using
ansible-lint *.yml
References
Projects similar to openshift-auto-upi: