/envisakit

Command-line tool for interacting with an Envisalink via Ademco TPI

Primary LanguagePythonApache License 2.0Apache-2.0

EnvisaKit

EnvisaKit is a command-line interface for the Eyez-On Envisalink module with Honeywell Vista panels. It allows you to arm and disarm the alarm system, as well as custom commands.

Note: This project is not compatible with DSC security panels. ** Updated for newest version of python

HomeKit and Siri

Connect EnvisaKit to HomeKit in order to control your alarm panel through Siri.

  1. Install EnvisaKit (see below)
  2. Install HomeBridge
  3. Install the [homebridge-envisakit plugin]

Installation


# Clone the repository
$ git clone 'https://github.com/haywirecoder/envisakit.git'
$ cd envisakit


# Configure EnvisaKit (see Configuration section)
$ cp envisakit-config.json.sample envisakit-config.json
$ nano envisakit-config.json

Usage


# Arming the system with code 1234
$ ./envisakit-cli arm -p 1234
Sending command: 12342

# Disarming the system with code 1234
$ ./envisakit-cli disarm -p 1234
Sending command: 12341

# Getting the status of the system
$ ./envisakit-cli status
Ready
AC Present

# Output JSON
$ ./envisakit-cli status -j
{"alarm_in_memory": false, "faulted": false, "in_alarm": false, "fire": false, "low-battery": false, "arm-mode": "disarmed", "ac-present": true, "bypassed": false, "system-trouble": false, "ready": true, "chime": false, "armed": false}

Configuration

EnvisaKit works through the Ademco Third-Party Interface (TPI) running on the Envisalink module.

Configuration sample:


{
	"host": "envisalink",
	"port": 4025,
	"password": "user"
}
  • "host": Hostname or IP of the Envisalink module (required, default: "envisalink")
  • "port": Port for the Envisalink TPI (required, default: 4025)
  • "password": Password for the Envisalink TPI (required, default: "user")