haywirecoder/homebridge-envisalink-ademco

Issues

• No TPI session - and doesn't seem to reconnect

  #29 opened 5 months ago by dtpanic
  15

• Disarm via Home app not working and timing out

  #52 opened 6 months ago by barros001
  14

• Request: Periodically set clock on Envisalink

  #51 opened 7 months ago by iTim314
  2

• Alarm switches frequently to "triggered"

  #50 opened 8 months ago by chritd
  10

• Make sure TPI is enabled?

  #49 opened 9 months ago by bmaranda
  1

• Optional flag to suppress warnings?

  #45 opened a year ago by irctrakz
  6

• EnvisaLink ademco plugin stopped working after updating details below

  #47 opened a year ago by damdude
  6

• Homebridge Envisalink Accessories Not Showing up in Apple Home

  #46 opened a year ago by blinkhappy
  2

• Improve how sensor status is updated (if really possible)

  #42 opened a year ago by barros001
  5

• setChime toggles without checking current status

  #43 opened a year ago by barros001
  4

• No alarm system mode command is supported for partition status NOT_READY.

  #41 opened a year ago by arcticfoxwpg
  16

• Night security state in homekit

  #40 opened a year ago by adrianradtke
  1

• Zones automatically closing

  #39 opened a year ago by boognishbeliever
  5

• Did bypassEnabled change to only open sensors?

  #38 opened a year ago by HerbM3
  8

• How do I add child bridge to Home app?

  #37 opened 2 years ago by danTHAman152000
  0

• This plugin generated a warning from the characteristic 'Security System Current State'

  #36 opened 2 years ago by irctrakz
  8

• Zone battery?

  #34 opened 2 years ago by samwelnella
  10

• [Envisalink-Ademco] Command not successful. No TPI session establish.

  #35 opened 2 years ago by allenlbrown
  10

• No motion events

  #33 opened 2 years ago by tomhoag
  4

• 2.0.3 - Ignoring bypass request

  #32 opened 2 years ago by HerbM3
  2

• ECONNRESET error

  #30 opened 2 years ago by Vince-Vmar
  2

• Start up error - Misconfigured Alarm Zone Bypass switch definition Zone Bypass ignoring

  #31 opened 2 years ago by Landonthi
  2

• critical alerts no longer working

  #27 opened 2 years ago by ErikCode1
  1

• Turning off triggered alarm

  #26 opened 3 years ago by HerbM3
  2

• Night mode constantly "Arming" in HomeKit

  #22 opened 3 years ago by HerbM3
  4

• home bridge unable to connect after setup with HomeKit.

  #20 opened 3 years ago by damdude
  9

• TPI disconnecting

  #23 opened 3 years ago by joshjohanning
  8

• No TPI session established.

  #25 opened 3 years ago by HerbM3
  6

• Pin to unarm

  #24 opened 3 years ago by damdude
  3

• Function key error

  #19 opened 3 years ago by HerbM3
  8

• Add Device Model "Vista 21ip"

  #21 opened 3 years ago by 7RDR7
  4

• Add explicit partition numbers

  #17 opened 3 years ago by jaytavares
  14

• Display a Switch to Use to Trigger Automations?

  #18 opened 3 years ago by rtkane1015
  4

• Cannot arm "Away", it seems to default to "home"

  #15 opened 3 years ago by mmorim
  6

• Option to disable chime

  #16 opened 3 years ago by cefoster0
  4

• 'Security System Current State': Characteristic not in required or optional characteristic section for service Switch.

  #14 opened 3 years ago by sebastiangoldstein
  2

• Errors

  #13 opened 3 years ago by 7RDR7
  5

• Armed "Night", but displays "Home"

  #12 opened 4 years ago by 7RDR7
  2

• "Carbon Monoxide" device type?

  #11 opened 4 years ago by tevans62
  4

• Plugin Stoped working Overnight

  #10 opened 4 years ago by sebastiangoldstein
  8

• AssertionError [ERR_ASSERTION]: Accessories must be created with a non-empty displayName.

  #8 opened 4 years ago by AdamHLG
  8

• 'Session closed unexpectedly. Re-establishing Session" after Homebridge 1.1.3 update

  #7 opened 4 years ago
  15

• PIN Integer type for Homebridge config JSON disallows some PINs

  #4 opened 4 years ago by koleson
  3

• TypeError: Cannot read property 'length' of undefined

  #2 opened 4 years ago by sjsli
  2

• Error loading plugin, node_modules/homebridge-envisalink-ademco does not contain the 'homebridge' package in 'engines'

  #1 opened 4 years ago by sjsli
  2

• Envisilink Plugin causing SIGTERM shutdown when run in Automation

  #6 opened 4 years ago by sebastiangoldstein
  2

• How to I arm/disarm the entire system? No control panel interface.

  #3 opened 4 years ago by sebastiangoldstein
  2