Pinned Repositories
knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
activfun
CEPSwift
Complex Event Processing Engine for Swift
iosostenta
knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
knot-hal-source
KNOT HAL is part of KNOT project. It aims to provide hardware abstraction layer for SPI and nRF24L01 radios. Allowing power constrained embedded devices to join a wireless network and exchange datagrams using nRF24L01 radios. The initial target platforms are Arduino (nodes), and Raspiberry PI GW. nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band. On a second project phase, other radio access technologies such as Bluetooth Low Energy, and Wi-Fi are planned.
knot-thing-source
KNoT Thing library is a lightweight C/C++ library built to use minimal CPU and memory resources. It is intended to run on KNoT Nodes (Things) (see KNoT Architecture for better understanding). It provides the Radio and Protocol abstractions for the application. The application builder just need implement the read/write functions for its sensors/actuators, register a Data Item (sensor or actuator) on the library and call the run() method on its main loop routine.
makefile-template
pmms
Synchronized media player for FiveM and RedM
visualizacao_ufpe_2016_2_listas-hmscj
helmitonjunior's Repositories
helmitonjunior/activfun
helmitonjunior/CEPSwift
Complex Event Processing Engine for Swift
helmitonjunior/iosostenta
helmitonjunior/knot-gateway-buildroot
KNOT Gateway Buildroot is part of KNOT project. This is the gateway (target Rpi hardware) software module for the KNoT platform.
helmitonjunior/knot-hal-source
KNOT HAL is part of KNOT project. It aims to provide hardware abstraction layer for SPI and nRF24L01 radios. Allowing power constrained embedded devices to join a wireless network and exchange datagrams using nRF24L01 radios. The initial target platforms are Arduino (nodes), and Raspiberry PI GW. nRF24L01 is a highly integrated, ultra low power (ULP) 2Mbps RF transceiver IC for the 2.4GHz ISM band. On a second project phase, other radio access technologies such as Bluetooth Low Energy, and Wi-Fi are planned.
helmitonjunior/knot-thing-source
KNoT Thing library is a lightweight C/C++ library built to use minimal CPU and memory resources. It is intended to run on KNoT Nodes (Things) (see KNoT Architecture for better understanding). It provides the Radio and Protocol abstractions for the application. The application builder just need implement the read/write functions for its sensors/actuators, register a Data Item (sensor or actuator) on the library and call the run() method on its main loop routine.
helmitonjunior/makefile-template
helmitonjunior/pmms
Synchronized media player for FiveM and RedM
helmitonjunior/visualizacao_ufpe_2016_2_listas-hmscj