henricm/ha-ferroamp

Issues

• MODBUS support?

  #652 opened a month ago by bj00rn
  6

• ValueError: could not convert string to float

  #646 opened a month ago by robinostlund
  0

• Deprecated constants

  #480 opened 5 months ago by bj00rn
  0

• EnergyHub Control Status when active on FCR

  #555 opened 6 months ago by nsimb
  4

• Question: Incorrect statistics when MQTT was down over new year

  #535 opened 7 months ago by bj00rn
  8

• version 5.5.0-FCR.1 ferroamp, known problem

  #515 opened 9 months ago by nsimb
  1

• no sensors visible

  #483 opened 10 months ago by bjornwiberg
  2

• Battery sensor spamming logs

  #405 opened a year ago by bj00rn
  14

• FR: Make prefix configuration editable

  #473 opened a year ago by bj00rn
  0

• Any way to control EV/OCPP?

  #445 opened a year ago by fekberg
  2

• Hi and thanks for the very good follow-up :), MQTT had to be turned on in the local ferroamp from the supplier. Everything now seems to work.

  #417 opened a year ago by Moogels
  6

• Sensors in energy wrong

  #411 opened a year ago by bluboyo
  18

• Possible bug on FaultCodeSensor

  #401 opened a year ago by robinostlund
  2

• Entities in 1.14.0 shows too many decimals

  #394 opened a year ago by pertakman
  3

• Control maximum export from HA

  #356 opened a year ago by LudvigD
  3

• Use HA precision instead of own precision config and handling

  #355 opened a year ago by argoyle
  0

• vscode devcontainer support?

  #371 opened a year ago by bj00rn
  2

• Question: How to keep history for external voltage for each phase?

  #353 opened a year ago by bj00rn
  7

• EnergyHub DC Link Voltage state is zero

  #364 opened a year ago by bj00rn
  8

• Additional SSO Fault codes

  #361 opened a year ago by bj00rn
  3

• Add scan_interval to the scrape documentation

  #345 opened 2 years ago by mickecamino
  2

• Possible memory leak

  #316 opened 2 years ago by mickecamino
  48

• Control Status = unavailable after HA restart

  #330 opened 2 years ago by danielolsson100
  0

• Issue with v1.10.2

  #318 opened 2 years ago by u1malmberg
  28

• Sensors not working

  #317 opened 2 years ago by Monewalker
  5

• Non-numeric value

  #292 opened 2 years ago by argoyle
  4

• Battery entities not able to choose in Energy Dashboard

  #291 opened 2 years ago by andreasropel
  7

• Sensor Cost?

  #283 opened 2 years ago by bj00rn
  5

• Problem after upgrading Ferroamp to version 5.2.2

  #279 opened 2 years ago by umepali
  9

• Setup sanity check fails with "MQTT integration is not available"

  #265 opened 2 years ago by angas
  7

• ferroamp_control_status sensor wrong data

  #239 opened 2 years ago by mipe79
  4

• [FR] separated L1, L2 & L3 load

  #201 opened 2 years ago by Rittsel
  1

• System state sensor shown as integer

  #99 opened 2 years ago by bj00rn
  10

• Deprecation warning

  #173 opened 3 years ago by robinostlund
  3

• Frequent log error

  #162 opened 3 years ago by bj00rn
  5

• Add sensor for consumption

  #164 opened 3 years ago by riksarchen
  2

• Grid current doesn’t show correct values

  #161 opened 3 years ago by riksarchen
  2

• Ampere on each phase

  #158 opened 3 years ago by riksarchen
  3

• sensor.ferroamp_external_energy_produced is not strictly increasing

  #126 opened 3 years ago by jonasbkarlsson
  6

• Suggestion: Separate sensors for phase load

  #108 opened 3 years ago by robinostlund
  3

• Add sensor for measurement "iavbl"

  #95 opened 3 years ago by jonasbkarlsson
  5

• No history for SSO Relay Status in history-graph

  #92 opened 3 years ago by bj00rn
  4

• 1.4.0 fix/update not working.

  #85 opened 3 years ago by u1malmberg
  7

• sensor.ferroamp_total_solar_energy suddenly decreasing in value

  #76 opened 3 years ago by jonasbkarlsson
  4

• MQTT - Mosquitto broker

  #72 opened 3 years ago by bopbrev
  18

• Names for the load balancing sensors

  #66 opened 3 years ago by jonasbkarlsson
  16

• Setup SSO sensors for long-term statistics

  #70 opened 3 years ago by argoyle
  0

• Service calls

  #59 opened 3 years ago by TurboJonte
  7

• Clean up of the instruction to install

  #57 opened 3 years ago by Letalis
  5

• Ferroamp integration broke on 2021.8 upgrade

  #56 opened 3 years ago by Letalis
  0