b2rr2b

A Bluesim simulation probe framework.

This framework includes the following components:

/bluesim-rlib : A Rust library called by the Bluesim program for receiving and sending data.
/probe-blue : BSV code for the probe, calling Rust functions through the BDPI interface.
/rb_link :A Rust framework for interacting with probes, capable of getting and sending data.

Uasge

First, you need to write BSV code and instantiate RProbe within it.

the example located at: examples/AdderPipeline/AdderPipeline.bsv

import RProbe::*;
import FIFOF::*;

(* synthesize *)
module mkAdderPipeline(Empty);
    FIFOF#(Bit#(32)) f2d <- mkFIFOF;
    RProbe#(Bit#(32), Bit#(32)) probe <- mkRProbe(0);

    Reg#(Bit#(32)) fetch_times <- mkReg(0);
    Reg#(Bit#(32)) put_times <- mkReg(0);


    rule doGet if (fetch_times < 10);
        Bit#(32) data = probe.get_data;
        f2d.enq(data);
        fetch_times <= fetch_times + 1;
    endrule

    rule doPut;
        Bit#(32) data = f2d.first;
        f2d.deq;
        probe.put_data(data + 1);
        put_times <= put_times + 1;
        if(put_times == 9) begin
            probe.shut_down_server();
            $finish;
        end
    endrule
endmodule

You need to link the Rust library file when linking Bluesim.

$ cd bluesim-rilb
$ cargo build
$ cd ../examples/AdderPipeline/
$ bsc -u -sim -bdir build -p .:%/Libraries:../../probe-blue/ -simdir build AdderPipeline.bsv 
// add the .a file after the link command
$ bsc -sim -e mkAdderPipeline  -bdir build -simdir build -o adder.out ../../bluesim-rlib/target/debug/libblue.a

Next, write your Rust code for analyzing the data.

the example located at: examples/adder_analysis/

use rb_link::*;
use std::thread;
use std::time::Duration;

fn main() {
    let mut server = B2RServer::new_with("/tmp/adder");
    // the getter used to get data from bluesim
    let mut id_getter = IDGetter::new(&server);
    for i in 0..10 {
        let num: u32 = i;
        server.put(0, num.to_le_bytes().to_vec())
    }

    //start a new thread to receive the data
    let _ = server.serve();

    thread::sleep(Duration::from_secs(3));

    let msg_vec = id_getter.get_id_all(0);
    for msg in msg_vec {
        println!(
            "get from blue id:{}, cycle:{}, data:{}",
            msg.id,
            msg.cycles,
            u32::from_le_bytes([
                msg.message[0],
                msg.message[1], 
                msg.message[2],
                msg.message[3]
            ])
        );
    }
}

Please ensure the rust program runs before the bliuesim

$ cd examples/adder_analysis/
$ cargo run

The path for the socket used for communication by default is /tmp/b2rr2b.

You can set the desired path by configuring the B2R_SOCKET variable.

In another terminal:

B2R_SOCKET=/tmp/adder ./adder.out

hercule-karuha/b2rr2b

b2rr2b

A Bluesim simulation probe framework.

Uasge