This is the README file for tinc version 1.0.33. Installation instructions may be found in the INSTALL file. tinc is Copyright (C) 1998-2017 by: Ivo Timmermans, Guus Sliepen <guus@tinc-vpn.org>, and others. For a complete list of authors see the AUTHORS file. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See the file COPYING for more details. Security statement ------------------ In August 2000, we discovered the existence of a security hole in all versions of tinc up to and including 1.0pre2. This had to do with the way we exchanged keys. Since then, we have been working on a new authentication scheme to make tinc as secure as possible. The current version uses the OpenSSL library and uses strong authentication with RSA keys. On the 29th of December 2001, Jerome Etienne posted a security analysis of tinc 1.0pre4. Due to a lack of sequence numbers and a message authentication code for each packet, an attacker could possibly disrupt certain network services or launch a denial of service attack by replaying intercepted packets. The current version adds sequence numbers and message authentication codes to prevent such attacks. On September the 15th of 2003, Peter Gutmann contacted us and showed us a writeup describing various security issues in several VPN daemons. He showed that tinc lacks perfect forward security, the connection authentication could be done more properly, that the sequence number we use as an IV is not the best practice and that the default length of the HMAC for packets is too short in his opinion. We do not know of a way to exploit these weaknesses, but these issues are being addressed in the tinc 1.1 branch. The Sweet32 attack affects versions of tinc prior to 1.0.30. Cryptography is a hard thing to get right. We cannot make any guarantees. Time, review and feedback are the only things that can prove the security of any cryptographic product. If you wish to review tinc or give us feedback, you are strongly encouraged to do so. Changes to configuration file format since 1.0pre5 -------------------------------------------------- Some configuration variables have different names now. Most notably "TapDevice" should be changed into "Device", and "Device" should be changed into "BindToDevice". Compatibility ------------- Version 1.0.31 is compatible with 1.0pre8, 1.0 and later, but not with older versions of tinc. Note that since version 1.0.30, tinc requires all nodes in the VPN to be compiled with a version of LibreSSL or OpenSSL that supports the AES256 and SHA256 algorithms. Requirements ------------ Since 1.0pre3, we use OpenSSL for all cryptographic functions. So you need to install this library first; grab it from http://www.openssl.org/. You will need version 1.0.1 or later with support for AES256 and SHA256 enabled. If this library is not installed on you system, configure will fail. The manual in doc/tinc.texi contains more detailed information on how to install this library. Alternatively, you may also use LibreSSL. Since 1.0pre6, the zlib library is used for optional compression. You can find it at http://www.gzip.org/zlib/. Because of a possible exploit in earlier versions we recommend that you download version 1.1.4 or later. Since 1.0, the lzo library is also used for optional compression. You can find it at http://www.oberhumer.com/opensource/lzo/. In order to compile tinc, you will need a GNU C compiler environment. Features -------- This version of tinc supports multiple virtual networks at once. To use this feature, you may supply a netname via the -n or --net options. The standard locations for the config files will then be /etc/tinc/<net>/. tincd regenerates its encryption key pairs. It does this on the first activity after the keys have expired. This period is adjustable in the configuration file, and the default time is 3600 seconds (one hour). This version supports multiple subnets at once. They are also sorted on subnet mask size. This means that it is possible to have overlapping subnets on the VPN, as long as their subnet mask sizes differ. Since pre5, tinc can operate in several routing modes. The default mode, "router", works exactly like the older version, and uses Subnet lines to determine the destination of packets. The other two modes, "switch" and "hub", allow the tinc daemons to work together like a single network switch or hub. This is useful for bridging networks. The latter modes only work properly on Linux, FreeBSD and Windows. The algorithms used for encryption and generating message authentication codes can now be changed in the configuration files. All cipher and digest algorithms supported by OpenSSL can be used. Useful ciphers are "blowfish" (default), "bf-ofb", "des", "des3", et cetera. Useful digests are "sha1" (default), "md5", et cetera. Support for routing IPv6 packets has been added. Just add Subnet lines with IPv6 addresses (without using :: abbreviations) and use ifconfig or ip (from the iproute package) to give the virtual network interface corresponding IPv6 addresses. tinc does not provide autoconfiguration for IPv6 hosts. Consider using radvd or zebra if you need it. It is also possible to make tunnels to other tinc daemons over IPv6 networks, if the operating system supports IPv6. tinc will automatically use both IPv6 and IPv4 when available, but this can be changed by adding the option "AddressFamily = ipv4" or "AddressFamily = ipv6" to the tinc.conf file. Normally, when started tinc will detach and run in the background. In a native Windows environment this means tinc will install itself as a service, which will restart after reboots. To prevent tinc from detaching or running as a service, use the -D option.