/Adafruit_BME280_Library

Arduino Library for BME280 sensors

Primary LanguageC++

Adafruit BME280 Library Build Status

This is a library for the Adafruit BME280 Humidity, Barometric Pressure + Temp sensor

Designed specifically to work with the Adafruit BME280 Breakout

These sensors use I2C or SPI to communicate, up to 4 pins are required to interface

Use of this library also requires Adafruit_Sensor to be installed on your local system.

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Check out the links above for our tutorials and wiring diagrams

Written by Limor Fried/Ladyada for Adafruit Industries.
BSD license, all text above must be included in any redistribution

To download. click the DOWNLOAD ZIP button, rename the uncompressed folder Adafruit_BME280. Check that the Adafruit_BME280 folder contains Adafruit_BME280.cpp and Adafruit_BME280.h

Place the Adafruit_BME280 library folder your arduinosketchfolder/libraries/ folder. You may need to create the libraries subfolder if its your first library. Restart the IDE.

We also have a great tutorial on Arduino library installation at: http://learn.adafruit.com/adafruit-all-about-arduino-libraries-install-use

Compatibility

MCU Tested Works Doesn't Work Not Tested Notes
Atmega328 @ 16MHz X
Atmega328 @ 12MHz X
Atmega32u4 @ 16MHz X Use SDA/SCL on pins D2 & D3
Atmega32u4 @ 8MHz X Use SDA/SCL on pins D2 & D3
ESP8266 X I2C: just works, SPI: SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL)
ESP32 X I2C: just works, SPI: SDA/SCL default to pins 4 & 5 but any two pins can be assigned as SDA/SCL using Wire.begin(SDA,SCL)
Atmega2560 @ 16MHz X Use SDA/SCL on pins 20 & 21
ATSAM3X8E X Use SDA/SCL on pins 20 & 21
ATSAM21D X
ATtiny85 @ 16MHz X
ATtiny85 @ 8MHz X
Intel Curie @ 32MHz X
STM32F2 X
  • ATmega328 @ 16MHz : Arduino UNO, Adafruit Pro Trinket 5V, Adafruit Metro 328, Adafruit Metro Mini
  • ATmega328 @ 12MHz : Adafruit Pro Trinket 3V
  • ATmega32u4 @ 16MHz : Arduino Leonardo, Arduino Micro, Arduino Yun, Teensy 2.0
  • ATmega32u4 @ 8MHz : Adafruit Flora, Bluefruit Micro
  • ESP8266 : Adafruit Huzzah
  • ATmega2560 @ 16MHz : Arduino Mega
  • ATSAM3X8E : Arduino Due
  • ATSAM21D : Arduino Zero, M0 Pro
  • ATtiny85 @ 16MHz : Adafruit Trinket 5V
  • ATtiny85 @ 8MHz : Adafruit Gemma, Arduino Gemma, Adafruit Trinket 3V