##Goals: Run u-boot on STM32F103ZET6, with S71GL032NA0 (2MB PSRAM and 4MB nor flash) and NAND512-A(64MB nand flash).
##Status:
Added ST STD-lib, and modified a bit to fit with the original library.
Wrapped some functions to fit the common parts.
Add stm32f103zet6_config and add my files to Makefile's.
Environment variables are saved to embedded-flash, 128k offset.
2MB SRAM drived by FSMC started from 0x68000000.
64MB NAND flash drived by FSMC, with uboot nand commands, hardware ECC.
##Shortcommings
Currently NO NOR flash support...
Under developing...
##Previous README... This is the source tree of U-Boot, a popular boot loader for embedded devices. U-Boot was developed by DENX Software Engineering (www.denx.de).
This particular version of U-Boot is maintained by Emcraft Systems and supports several Cortex-M3 and Cortex-M4 based MCUs.
A complete list of Cortex-M MCUs and boards supported by this version of U-Boot is available at http://www.emcraft.com.
If you want to contribute code to this source tree, please email your patches to a2f-linux-support@emcraft.com.