/flow-ft

The Fungible Token standard on the Flow Blockchain

Primary LanguageGoThe UnlicenseUnlicense

Fungible Token Standard

This is a description of the Flow standard for fungible token contracts. It is meant to contain the minimum requirements to implement a safe, secure, easy to understand, and easy to use fungible token contract. It also includes an example implementation to show how a concrete smart contract would actually implement the interface.

What is Flow?

Flow is a new blockchain for open worlds. Read more about it here.

What is Cadence?

Cadence is a new Resource-oriented programming language for developing smart contracts for the Flow Blockchain. Read more about it here and see its implementation here

We recommend that anyone who is reading this should have already completed the Cadence Tutorials so they can build a basic understanding of the programming language.

Resource-oriented programming, and by extension Cadence, is the perfect programming environment for currencies, because users are able to store their tokens directly in their accounts and transact peer-to-peer. Please see the blog post about resources to understand why they are perfect for digital assets.

Feedback

Flow and Cadence are both still in development, so this standard will still be going through a lot of changes as the protocol and language evolves, and as we receive feedback from the community about the standard.

We'd love to hear from anyone who has feedback. Main feedback we are looking for is:

The feedback we are looking for is:

  • Are there any features that are missing from the standard?
  • Are the features that we have included defined in the best way possible?
  • Are there any pre and post conditions for functions that are missing?
  • Are the pre and post conditions defined well enough? Error messages?
  • Are there any other actions that need an event defined for them?
  • Are the current event definitions clear enough and do they provide enough information for apps and other actors a clear look into what is happening?
  • Are the variable, function, and parameter names descriptive enough?
  • Are there any openings for bugs or vulnerabilities that we are not noticing?
  • Is the documentation/comments clear and concise and organized in a coherent manner?

Basics of the Standard:

The code for the standard is in contracts/FungibleToken.cdc. An example implementation of the standard that simulates what a simple token would be like is in contracts/ExampleToken.cdc.

The exact smart contract that is used for the official Flow Network Token is in contracts/FlowToken.cdc

Example transactions that users could use to interact with fungible tokens are located in the transactions/ directory. These templates are mostly generic and can be used with any fungible token implementation by providing the correct addresses, names, and values.

The standard consists of a contract interface called FungibleToken that requires implementing contracts to define a Vault resource that represents the tokens that an account owns. Each account that owns tokens will have a Vault stored in its account storage. Users call functions on each other's Vaults to send and receive tokens.

Right now we are using unsigned 64-bit fixed point numbers UFix64 as the type to represent token balance information. This type has 8 decimal places and cannot represent negative numbers.

Core Features (All contained in the main FungibleToken interface)

1- Getting metadata for the token smart contract via the fields of the contract:

  • pub var totalSupply: UFix64
    • The only required field of the contract. It would be incremented when new tokens are minted and decremented when they are destroyed.
  • Event that gets emitted when the contract is initialized
    • pub event TokensInitialized(initialSupply: UFix64)

2- Retrieving the token fields of a Vault in an account that owns tokens.

  • Balance interface
    • pub var balance: UFix64
      • The only required field of the Vault type

3- Withdrawing a specific amount of tokens amount using the withdraw function of the owner's Vault

  • Provider interface
    • pub fun withdraw(amount: UFix64): @FungibleToken.Vault
      • Conditions
        • the returned Vault's balance must equal the amount withdrawn
        • The amount withdrawn must be less than or equal to the balance
        • The resulting balance must equal the initial balance - amount
    • Users can give other accounts a reference to their Vault cast as a Provider to allow them to withdraw and send tokens for them. A contract can define any custom logic to govern the amount of tokens that can be withdrawn at a time with a Provider. This can mimic the approve, transferFrom functionality of ERC20.
  • withdraw event
    • Indicates how much was withdrawn and from what account the Vault is stored in. If the Vault is not in account storage when the event is emitted, from will be nil.
    • pub event TokensWithdrawn(amount: UFix64, from: Address?)

4 - Depositing a specific amount of tokens from using the deposit function of the recipient's Vault

  • Receiver interface

    • pub fun deposit(from: @FungibleToken.Vault)
    • Conditions
      • from balance must be non-zero
      • The resulting balance must be equal to the initial balance + the balance of from

  • deposit event

    • Indicates how much was deposited and to what account the Vault is stored in. If the Vault is not in account storage when the event is emitted, to will be nil.
    • pub event TokensDeposited(amount: UFix64, to: Address?)

  • Users could create custom Receivers to trigger special code when transfers to them happen, like forwarding the tokens to another account, splitting them up, and much more.

  • It is important that if you are making your own implementation of the fungible token interface that you cast the input to deposit as the type of your token. let vault <- from as! @ExampleToken.Vault The interface specifies the argument as @FungibleToken.Vault, any resource that satisfies this can be sent to the deposit function. The interface checks that the concrete types match, but you'll still need to cast the Vault before storing it.

5 - Creating an empty Vault resource

  • pub fun createEmptyVault(): @FungibleToken.Vault
  • Defined in the contract To create an empty Vault, the caller calls the function in the contract and stores the Vault in their storage.
  • Conditions:
    • the balance of the returned Vault must be 0

6 - Destroying a Vault

If a Vault is explicitly destroyed using Cadence's destroy keyword, the balance of the destroyed vault must be subracted from the total supply.

7 - Standard for Token Metadata

  • not sure what this should be yet
  • Could be a dictionary, could be an IPFS hash, could be json, etc.
  • need suggestions!

Comparison to Similar Standards in Ethereum

This spec covers much of the same ground that a spec like ERC-20 covers, but without most of the downsides.

  • Tokens cannot be sent to accounts or contracts that don't have owners or don't understand how to use them, because an account has to have a Vault in its storage to receive tokens. No safetransfer is needed.
  • If the recipient is a contract that has a stored Vault, the tokens can just be deposited to that Vault without having to do a clunky approve, transferFrom
  • Events are defined in the contract for withdrawing and depositing, so a recipient will always be notified that someone has sent them tokens with the deposit event.
  • The approve, transferFrom pattern is not included, so double spends are not permitted
  • Transfers can trigger actions because users can define custom Receivers to execute certain code when a token is sent.
  • Cadence integer types protect against overflow and underflow, so a SafeMath-equivalent library is not needed.

Metadata

A standard for token metadata is still an unsolved problem in the general blockchain world and we are still thinking about ways to solve it in Cadence. We hope to be able to store all metadata on-chain and are open to any ideas or feedback on how this could be implemented.

Bonus Features

Minting and Burning are not included in the standard but are included in the FlowToken example contract to illustrate what minting and burning might look like for a token in Flow.

8 - Minting or Burning a specific amount of tokens using a specific minter resource that an owner can control

  • MintandBurn Resource
    • function to mintTokens
    • tokens minted event
    • Each minter has a set amount of tokens that they are allowed to mint. This cannot be changed and a new minter needs to be created to add more allowance.
    • function to burnTokens
    • tokens Burnt event
    • Each time tokens are minted or burnt, that value is added or subtracted to or from the total supply.

The following features could each be defined as a separate interface. It would be good to make standards for these, but not necessary to include in the main standard interface and are not currently defined in this example.

9 - Withdrawing a specific amount of tokens from someone else's Vault by using their provider reference.

  • approved withdraw event
  • Providing a resource that only approves an account to send a specific amount per transaction or per day/month/etc.
  • Returning the amount of tokens that an account can send for another account.
  • Reading the balance of the account that you have permission to send tokens for
  • Owner is able to increase and decrease the approval at will, or revoke it completely
    • This is much harder than anticipated

11 - Pausing Token transfers (maybe a way to prevent the contract from being imported)

12 - Cloning the token to create a new token with the same distribution

13 - Restricted ownership (For accredited investors and such)

  • whitelisting
  • blacklisting

How to use the Fungible Token contract

To use the Flow Token contract as is, you need to follow these steps:

  1. If you are using the Playground, you need to deploy the FungibleToken definition to account 1 yourself and import it in ExampleToken. It is a predeployed interface in the emulator, testnet, and mainnet and you can import definition from those accounts:
    • 0xee82856bf20e2aa6 on emulator
    • 0x9a0766d93b6608b7 on testnet
    • 0xf233dcee88fe0abe on mainnet
  2. Deploy the ExampleToken definition
  3. You can use the get_balance.cdc or get_supply.cdc scripts to read the balance of a user's Vault or the total supply of all tokens, respectively.
  4. Use the setupAccount.cdc on any account to set up the account to be able to use FlowTokens.
  5. Use the transfer_tokens.cdc transaction file to send tokens from one user with a Vault in their account storage to another user with a Vault in their account storage.
  6. Use the mint_tokens.cdc transaction with the admin account to mint new tokens.
  7. Use the burn_tokens.cdc transaction with the admin account to burn tokens.
  8. Use the create_minter.cdc transaction to create a new MintandBurn resource and store it in a new Admin's account.

Running Automated Tests

You can find automated tests in the lib/go/test/token_test.go file. It uses the transaction templates that are contained in the lib/go/templates/transaction_templates.go file. Currently, these rely on a dependency from a private dapper labs repository to run, so external users will not be able to run them. We are working on making all of this public so anyone can run tests, but haven't completed this work yet.

License

The works in these folders are under the Unlicense: