/observer-spy

This library makes RxJS Observables testing easy!

Primary LanguageTypeScriptMIT LicenseMIT

@hirez_io/observer-spy ๐Ÿ‘€๐Ÿ’ช

This library makes RxJS Observables testing easy!

npm version npm downloads Build License: MIT codecov All Contributors


TestAngular.com - Free Angular Testing Workshop - The Roadmap to Angular Testing Mastery

Table of Contents


Installation

yarn add -D @hirez_io/observer-spy

or

npm install -D @hirez_io/observer-spy

THE PROBLEM: Testing RxJS observables is hard! ๐Ÿ˜“

Especially when testing advanced use cases.

Until this library, the common way to test observables was to use Marble tests

What are the disadvantages of Marble Tests?

Marble tests are very powerful, but unfortunately for most tests they are conceptually very complicated to learn and to reason about..

You need to learn and understand cold and hot observables, schedulers and to learn a new syntax just to test a simple observable chain.

More complex observable chains tests get even harder to read and to maintain.



THE SOLUTION: Observer Spies! ๐Ÿ‘€๐Ÿ’ช

The Observer-Spy library was created to present a viable alternative to Marble Tests.

An alternative which we believe is:

  • โœ… Easier to understand

  • โœ… Reduces the complexity

  • โœ… Makes observables tests cleaner


Here's what people had to say:

image


image



Why Observer-Spy is easier?

๐Ÿ˜ฎ Marble test:

import { TestScheduler } from 'rxjs/testing';

let scheduler: TestScheduler;

beforeEach(()=>{
  scheduler = new TestScheduler((actual, expected) => {
    expect(actual).toEqual(expected)
  })
})

it('should filter even numbers and multiply each number by 10', () => {
  
  scheduler.run(({cold, expectObservable}) => {
    const sourceValues = { a: 1, b: 2, c: 3, d: 4, e: 5, f: 6, g: 7, h: 8, i: 9, j: 10};

    const source$ = cold('-a-b-c-d-e-f-g-h-i-j|', sourceValues);
    const expectedOrder = '-a---b---c---d---e--|';
    const expectedValues = { a: 10, b: 30, c: 50, d: 70, e: 90};
    
    const result$ = source$.pipe(
      filter(n => n % 2 !== 0),
      map(x => x * 10)
    );

    expectObservable(result$).toBe(expectedOrder, expectedValues);
  })
});

๐Ÿ˜Ž Observer Spy Test:

import { subscribeSpyTo } from '@hirez_io/observer-spy';

it('should filter even numbers and multiply each number by 10', () => {
  
    const result$ = of(1, 2, 3, 4, 5, 6, 7, 8, 9, 10).pipe(
      filter(n => n % 2 !== 0),
      map(x => x * 10)
    );

    const observerSpy = subscribeSpyTo(result$);

    expect(observerSpy.getValues()).toEqual([10, 30, 50, 70, 90]);

  })
});

You generally want to test the outcome of your action instead of implementation details [like how many frames were between each value].

For most production app use cases, if enough (virtual) time passes testing the received values or their order should be sufficient.

This library gives you the tool to investigate your spy about the values it received and their order.

(The idea was inspired by Reactive Programming with RxJava)


Usage


const observerSpy = subscribeSpyTo(observable)

In order to test Observables you can use the subscribeSpyTo function:

import { subscribeSpyTo } from '@hirez_io/observer-spy';

it('should immediately subscribe and spy on Observable ', () => {
  const fakeObservable = of('first', 'second', 'third');

  // get a special observerSpy of type "SubscriberSpy" (with an additional "unsubscribe" method)
  // if you're using TypeScript you can declare it with a generic:
  // const observerSpy: SubscriberSpy<string> ... 
  const observerSpy = subscribeSpyTo(fakeObservable);

  // You can unsubscribe if you need to:
  observerSpy.unsubscribe();


  // EXPECTATIONS: 
  expect(observerSpy.getFirstValue()).toEqual('first');
  expect(observerSpy.receivedNext()).toBe(true);
  expect(observerSpy.getValues()).toEqual(fakeValues);
  expect(observerSpy.getValuesLength()).toEqual(3);
  expect(observerSpy.getFirstValue()).toEqual('first');
  expect(observerSpy.getValueAt(1)).toEqual('second');
  expect(observerSpy.getLastValue()).toEqual('third');
  expect(observerSpy.receivedComplete()).toBe(true);

  // --------------------------------------------------------

  // You can also use this shorthand version:

  expect(subscribeSpyTo(fakeObservable).getFirstValue()).toEqual('first');

  // --------------------------------------------------------

});

Wait for onComplete before expecting the result (using async + await)

it('should support async await for onComplete()', async () => {
  
  const fakeObservable = of('first', 'second', 'third');

  const observerSpy = subscribeSpyTo(fakeObservable);

// ๐Ÿ‘‡
  await observerSpy.onComplete(); // <-- the test will pause here until the observable is complete

  expect(observerSpy.receivedComplete()).toBe(true);

  // If you don't want to use async await you could pass a callback:
  //
  //   observerSpy.onComplete(() => {
  //     expect(observerSpy.receivedComplete()).toBe(true);
  //   }));
});

Spy on errors with receivedError and getError

โš  You MUST configure expectErrors to catch errors!

This ๐Ÿ‘† is to avoid swallowing unexpected errors (more details here)

it('should spy on Observable errors', () => {

  const fakeObservable = throwError('FAKE ERROR');

  const observerSpy = subscribeSpyTo(fakeObservable, {expectErrors: true});

  expect(observerSpy.receivedError()).toBe(true);

  expect(observerSpy.getError()).toEqual('FAKE ERROR');
});

Wait for onError before expecting the result (using async + await)

it('should support async await for onError()', async () => {
  
  const fakeObservable = throwError('FAKE ERROR');

  const observerSpy = subscribeSpyTo(fakeObservable, {expectErrors: true});

// ๐Ÿ‘‡
  await observerSpy.onError(); // <-- the test will pause here until the observer receive the error

  expect(observerSpy.getError()).toEqual('FAKE ERROR');

});

Manually using new ObserverSpy()

You can create an ObserverSpy instance manually:

// ... other imports
import { ObserverSpy } from '@hirez_io/observer-spy';

it('should spy on Observable values', () => {
  
  const fakeValues = ['first', 'second', 'third'];
  const fakeObservable = of(...fakeValues);

  // BTW, if you're using TypeScript you can declare it with a generic:
  // const observerSpy: ObserverSpy<string> = new ObserverSpy();
  const observerSpy = new ObserverSpy();

  // This type of ObserverSpy doesn't have a built in "unsubscribe" method
  // only the "SubscriberSpy" has it, so we need to create a separate "Subscription" variable.
  const subscription = fakeObservable.subscribe(observerSpy);

  // ...DO SOME LOGIC HERE...

  // unsubscribing is optional, it's good for stopping intervals etc
  subscription.unsubscribe();

  expect(observerSpy.getValuesLength()).toEqual(3);

});

If you need to spy on errors, make sure to set the expectErrors property:

it('should spy on Observable errors', () => {
  
  const fakeObservable = throwError('OOPS');

  const observerSpy = new ObserverSpy({expectErrors: true}); // <-- IMPORTANT
  // OR
  const observerSpy = new ObserverSpy().expectErrors(); // <-- ALTERNATIVE WAY TO SET IT

  // Or even...
  observerSpy.expectErrors(); // <-- ALTERNATIVE WAY TO SET IT
  
  fakeObservable.subscribe(observerSpy);

  expect(observerSpy.receivedError()).toBe(true);

});

Auto Unsubscribing

In order to save you the trouble of calling unsubscribe in each test, you can configure the library to auto unsubscribe from every observer you create with subscribeSpyTo().

โš  PAY ATTENTION:

  • You should only call autoUnsubscribe() once per environment (not manually after each test!). You do it in your testing environment setup files (like jest.config.js or test.ts in Angular).

  • This works only with subscriptions created using either subscribeSpyTo() or queueForAutoUnsubscribe().

  • Currently it only works with frameworks like Jasmine, Mocha and Jest (because they have a global afterEach function)

This library provide helper functions to help you configure this behavior -


โš’ Configuring Jest with setup-auto-unsubscribe.js

This requires Jest to be loaded and then calls autoUnsubscribe() which sets up a global / root afterEach function that unsubscribes from your observer spies.

Add this to your jest configuration (i.e jest.config.js):

{
  setupFilesAfterEnv: ['<rootDir>/node_modules/@hirez_io/observer-spy/dist/setup-auto-unsubscribe.js'],
}

โš’ Configuring Angular (Karma + Jasmine) with autoUnsubscribe

This will add a root level afterEach() once that auto unsubscribes observer spies.

Add this to your test.ts -

// test.ts
// ~~~~~~~

import { autoUnsubscribe } from '@hirez_io/observer-spy';

autoUnsubscribe();

โš’ Manually adding a subscription with queueForAutoUnsubscribe

If you configured your environment to "autoUnsubscribe" and want your manually created spies (via new ObserverSpy()) to be "auto unsubscribed" as well, you can use queueForAutoUnsubscribe(subscription).

It accepts any Unsubscribable object which has an unsubscribe() method -

import { queueForAutoUnsubscribe } from '@hirez_io/observer-spy';


it('should spy on Observable values', () => {
  const fakeValues = ['first', 'second', 'third'];
  const fakeObservable = of(...fakeValues);

  const observerSpy = new ObserverSpy();
  const subscription = fakeObservable.subscribe(observerSpy)
  
  // This will auto unsubscribe this subscription after the test ends
  // (if you configured "autoUnsubscribe()" in your environment)
  queueForAutoUnsubscribe(subscription);

  // ... rest of the test

});

This will ensure your manually created spies are auto unsubscribed at the end of each test.

Testing Sync Logic

โ–ถ Synchronous RxJS

RxJS - without delaying operators or async execution contexts - will run synchronously. This is the simplest use case; where our it() does not need any special asynchronous plugins.

it('should run synchronously', () => {
  const observerSpy = subscribeSpyTo(from(['first', 'second', 'third']));
  expect(spy.getValuesLength()).toBe(3);
});


Testing Async Logic

If you're not using Angular and have RxJS async operators like delay or timeout

Use fakeTime with flush() to simulate the passage of time (detailed explanation) -

image


โ–ถ RxJS + Angular: use fakeAsync

With Angular, you can control time in a much more versatile way.

Just use fakeAsync (and tick if you need it):

// ... other imports
import { subscribeSpyTo } from '@hirez_io/observer-spy';
import { fakeAsync, tick } from '@angular/core/testing';

it('should test Angular code with delay', fakeAsync(() => {
  
  const fakeObservable = of('fake value').pipe(delay(1000));

  const observerSpy = subscribeSpyTo(fakeObservable);

  tick(1000);

  expect(observerSpy.getLastValue()).toEqual('fake value');
}));

โ–ถ RxJS + Promises: use async + await

Since Promise(s) are MicroTasks, we should consider them to resolve asynchronously.

For code using Promise(s) without timeouts or intervals, just use async + await with the onComplete() method:

// ... other imports
import { subscribeSpyTo } from '@hirez_io/observer-spy';

it('should work with promises', async () => {

  const fakeService = {
    getData() {
      return Promise.resolve('fake data');
    },
  };
  const fakeObservable = defer(() => fakeService.getData());

  const observerSpy = subscribeSpyTo(fakeObservable);

  await observerSpy.onComplete();

  expect(observerSpy.getLastValue()).toEqual('fake data');
});

โ–ถ RxJS Timers / Animations: use fakeTime

RxJS code that has time-based logic (e.g using timeouts / intervals / animations) will emit asynchronously.

fakeTime() is a custom utility function that wraps the test callback which is perfect for most of these use-cases.

It does the following things:

  1. Changes the RxJS AsyncScheduler delegate to use VirtualTimeScheduler and use "virtual time".
  2. Passes a flush() function you can call whenever you want to virtually pass time forward.
  3. Works well with done if you pass it as the second parameter (instead of the first)

Example:

// ... other imports
import { subscribeSpyTo, fakeTime } from '@hirez_io/observer-spy';

it('should handle delays with a virtual scheduler', fakeTime((flush) => {
    const VALUES = ['first', 'second', 'third'];

    const delayedObservable: Observable<string> = of(...VALUES).pipe(delay(20000));

    const observerSpy = subscribeSpyTo(delayedObservable);
    
    flush(); // <-- passes the "virtual time" forward

    expect(observerSpy.getValues()).toEqual(VALUES);
  })
);

// ===============================================================================

it('should handle done functionality as well', fakeTime((flush, done) => {
    const VALUES = ['first', 'second', 'third'];

    const delayedObservable: Observable<string> = of(...VALUES).pipe(delay(20000));

    const observerSpy = subscribeSpyTo(delayedObservable);
    flush();

    observerSpy.onComplete(() => {
      expect(observerSpy.getValues()).toEqual(VALUES);
      done();
    });
  })
);

โ–ถ RxJS + AJAX calls:

Asynchronous REST calls (using axios, http, fetch, etc.) should not be tested in a unit / micro test... Test those in an integration test! ๐Ÿ˜œ



๐Ÿง  Wanna become a PRO Observables tester?

In Angular Class Testing In action course Shai Reznik goes over all the differences and show you how to use observer spies to test complex Observable chains with switchMap, interval etc...



Contributing

Want to contribute? Yayy! ๐ŸŽ‰

Please read and follow our Contributing Guidelines to learn what are the right steps to take before contributing your time, effort and code.

Thanks ๐Ÿ™


Code Of Conduct

Be kind to each other and please read our code of conduct.


Contributors โœจ

Thanks goes to these wonderful people (emoji key):

Shai Reznik
Shai Reznik

๐Ÿ’ป โš ๏ธ ๐Ÿš‡ ๐Ÿ“– ๐Ÿšง ๐Ÿ‘€ ๐Ÿค”
Edouard Bozon
Edouard Bozon

๐Ÿ’ป โš ๏ธ ๐Ÿ“– ๐Ÿค”
Adam Smith
Adam Smith

๐Ÿ“–
Katharina Koal
Katharina Koal

๐Ÿ’ป โš ๏ธ ๐Ÿ“– ๐Ÿค” ๐Ÿ›
Thomas Burleson
Thomas Burleson

๐Ÿ’ป โš ๏ธ ๐Ÿ“– ๐Ÿค”
Levent Arman ร–zak
Levent Arman ร–zak

๐Ÿ“–
Petr Zahradnรญk
Petr Zahradnรญk

๐Ÿ’ป โš ๏ธ ๐Ÿ“– ๐Ÿค”
Jason Landbridge
Jason Landbridge

๐Ÿ“–

This project follows the all-contributors specification. Contributions of any kind welcome!


License

MIT