The Crazyflie PC client enables flashing and controlling the Crazyflie. It implements the user interface and high-level control (for example gamepad handling). The communication with Crazyflie and the implementation of the CRTP protocol to control the Crazflie is handled by the cflib project.
For more info see our wiki.
The Crazyflie client requires cflib. If you want to develop with the lib too, follow the cflib readme to install it.
Running from source on Windows is tested using the official python build from python.org. The client works with python version >= 3.5. The procedure is tested with 32bit python. It should work with 64bit python but since it is not tested it can be broken (if so, do not hesitate to send a fix ;-).
To run the client you should install python, make sure to check the "add to path" checkbox during install. You should also have git installed and in your path. Use git to clone the crazyflie client project.
Open a command line window and move to the crazyflie clients folder (the exact command depends of where the project is cloned):
cd crazyflie-clients-python
Download the SDL2.dll windows library:
python tools\build\prep_windows
Install the client in development mode:
pip install -e .[dev,qt5]
You can now run the clients with the following commands:
cfclient
cfheadless
cfloader
cfzmq
NOTE: To use Crazyradio you will have to install the drivers
Pycharm is an IDE for python. Any Python IDE or development environment will work for the Crazyflie client. To work on the Crazyflie firmware with Pycharm, install pycharm community edition and open the Crazyflie client folder in it. Pycharm will automatically detect the python installation.
To run the client, open and run the file bin/cfclient.
You are now able to edit and debug the python code. you can edit the .ui files for the GUI with QtCreator. You can the Qt development kit from the Qt website and open the .ui files in QtCreator.
When you are able to run from source, you can build the windows executable and installer.
First build the executable
python setup.py build
Now you can run the client with build\exe.win32-3.6\cfclient.exe.
To generate the installer you need nsis installed and in the path. If you
are a user of chocolatey you can install it with choco install nsis.portable -version 2.50,
otherwise you can just download it and install it manually.
To create the installer:
python win32install\generate_nsis.py
makensis win32install\cfclient.nsi
Unlike for Windows, there is no build for mac yet. It should be possible to package the client as a mac app and help is wanted. In the mean time you can run the client by installing python and pulling the client python package.
The easiest to get the client running on Mac if you do not already have Homebrew installed is to use the official Python distribution. If you are using Homebrew look at the next section. If you are using Anaconda/Conda, the procedure should be very similar but you can skip the python installation.
- Download and install python from python.org
- Download sdl2 for Mac OSX and copy SDL2.framework into /Lirary/Frameworks
- Open a console and install the client with
python3 -m pip install cfclient[qt5] pysdl2. This will install the latest release.
You can now launch the client with python3 -m cfclient.gui
If you want to develop and modify the client, you can clone this repos, uninstall cfclient with python3 -m pip uninstall cfclient and install it in development mode by navigating into the repos root folder and installing the client in edit mode: python3 -m pip install -e ..
IMPORTANT NOTE: The following will use Homebrew and its own Python distribution. If you have a lot of other 3rd party python stuff already running on your system they might or might not be affected by this.
-
Install homebrew
-
Install the brew bottles needed
brew install python3 sdl sdl2 sdl_image sdl_mixer sdl_ttf libusb portmidi pyqt5 -
Install the client
- If you only want to use the client to fly the Crazyflie and don't care about coding
pip3 install cfclient- If you want to develop the client and play with the source code. From the source folder run
pip3 install -e .If you want to develop on cflib as well, install cflib from https://github.com/bitcraze/crazyflie-lib-python
-
You now have all the dependencies needed to run the client. The client can now be started from any location by:
cfclient
If you want to develop with the lib, install cflib from https://github.com/bitcraze/crazyflie-lib-python
Cfclient requires Python3, pip and pyqt5 to be installed using the system package manager. For example on Ubuntu/Debian:
sudo apt-get install python3 python3-pip python3-pyqt5 python3-pyqt5.qtsvg
Install cfclient to run it from source. From the source folder run (to install
for your user only you can add --user to the command):
pip3 install -e .
To launch the GUI application in the source folder type:
python3 bin/cfclient
To launch the GUI after a systemwide installation, execute cfclient.
The Crazyflie PC client has the following dependencies:
- Installed from system packages
- Python 3.4+
- PyQt5
- A pyusb backend: libusb 0.X/1.X
- Installed from PyPI using PIP:
- cflib
- PyUSB
- PyQtGraph
- ZMQ
- appdirs
- PyYAML
Using Crazyradio on Linux requires that you set udev permissions. See the cflib readme for more information.