/snooze

run a command at a particular time

Primary LanguageC

snooze: run a command at a particular time

snooze is a new tool for waiting until a particular time and then running a command. Together with a service supervision system such as runit, this can be used to replace cron(8).

snooze has been tested on Linux 4.2. It will likely work on other Unix-like systems with C99.

Benefits

Over cron:

  • mnemonic syntax
  • no overlapping job runs possible
  • filtering by ISO week and day of year
  • due to supervision, no centralized daemon required
  • due to supervision, can easily disable jobs or force their execution instantly
  • due to supervision, have custom logs
  • due to no centralized daemon, no fuzzing with multiple users/permissions
  • very robust with respect to external time changes
  • can use a file timestamp to ensure minimum waiting time between two runs, even across reboots
  • randomized delays (some cron have that)
  • variable slack (no need for anacron)
  • ad-hoc usage possible, just run the program from command line

Over runwhen:

  • less confusing usage (I hope)
  • filtering by ISO week and day of year
  • zero dependencies

Over uschedule:

  • due to supervision, no centralized daemon required
  • filtering by ISO week and day of year

Over systemd timers:

  • mnemonic syntax
  • less complexity for jobs, no need for a <job>.timer file distinct from the <job>.service file,
  • can use a file timestamp to ensure minimum waiting time between two runs, even across reboots
  • very robust with respect to external time changes
  • randomized delays
  • variable slack
  • ad-hoc usage possible, just run the program from command line

Rosetta stone

  • run five minutes after midnight, every day: cron: 5 0 * * * snooze: -M5
  • run at 2:15pm on the first of every month: cron: 15 14 1 * * snooze: -d1 -H2 -M15
  • run at 10 pm on weekdays: cron: 0 22 * * 1-5 snooze: -w1-5 -H22
  • run 23 minutes after midnight, 2am, 4am ..., everyday: cron: 23 0-23/2 * * * snooze: -H/2 -M23
  • run every second week: snooze: -W/2
  • run every 10 days: snooze: -D/10

Usage:

snooze [-nv] [-t timefile] [-T timewait] [-R randdelay] [-s slack] [-d mday] [-m mon] [-w wday] [-D yday] [-W yweek] [-H hour] [-M min] [-S sec] COMMAND...
  • -n: dry-run, print the next 5 times the command would run.
  • -v: verbose, print scheduled (and rescheduled) times.
  • -t, -T: see below timefiles
  • -R: add between 0 and RANDDELAY seconds to the scheduled time.
  • -s: commands are executed even if they are SLACK (default: 60) seconds late.

The durations RANDDELAY and SLACK and TIMEWAIT are parsed as seconds, unless a postfix of m for minutes, h for hours, or d for days is used.

The remaining arguments are patterns for the time fields:

  • -d: day of month
  • -m: month
  • -w: weekday (0-7, sunday is 0 and 7)
  • -D: day of year
  • -W: ISO week of year (0..53)
  • -H: hour
  • -M: minute
  • -S: second

The following syntax is used for these options:

  • exact match: -d 3, run on the 3rd
  • alternation: -d 3,10,27, run on 3rd, 10th, 27th
  • range: -d 1-5, run on 1st, 2nd, 3rd, 4th, 5th
  • star: -d '*', run every day
  • repetition: -d /5, run on 5th, 10th, 15th, 20th, 25th, 30th day
  • shifted repetition: -d 2/5, run on 7th, 12th, 17th, 22nd, 27th day

and combinations of those, e.g. -d 1-10,15/5,28.

The defaults are -d* -m* -w* -D* -W* -H0 -M0 -S0, that is, every midnight.

Note that all patterns need to match (contrary to cron where either day of month or day of week matches), so -w5 -d13 only runs on Friday the 13th.

Timefiles

Optionally, you can keep track of runs in time files, using -t and optionally -T.

When -T is passed, execution will not start earlier than the mtime of TIMEFILE plus TIMEWAIT seconds.

When -T is not passed, snooze will start finding the first matching time starting from the mtime of TIMEFILE, and taking SLACK into account. (E.g. -H0 -s 1d -t timefile will start an instant execution when timefile has not been touched today, whereas without -t this would always wait until next midnight.)

If TIMEFILE does not exist, it will be assumed outdated enough to ensure earliest execution.

snooze does not update the timefiles, your job needs to do that! Only mtime is looked at, so touch(1) is good.

Exact behavior

  • snooze parses the option flags and computes the first time the date pattern matches, as a symbolic date
  • if a timefile is specified, the time is upped to timefile + timewait seconds
  • if a random delay is requested, it is added
  • snooze computes how far this event is in the future
  • snooze sleeps that long, but at most 5 minutes
  • after waking, snooze recomputes how far the event is in the future
  • if the event is in the past, but fewer than SLACK seconds, snooze execs the command. You need to ensure (by setting up supervision) snooze runs again after that!
  • if we woke due to a SIGALRM, the command is executed immediately as well
  • if we notice time moved backwards, recompute the time until the event
  • if the event is in the future, recompute the time it takes, possibly considering shifting of the system time or timezone changes (timezone reload only tested on glibc)
  • If no command was given, just return with status 0
  • and so on...

Common usages

Run a job like cron, every day at 7am and 7pm:

exec snooze -H7,19 rdumpfs / /data/dump/mybox 2>&1

Run a job daily, never twice a day:

exec snooze -H0 -s 1d -t timefile \
	sh -c 'run-parts /etc/cron.daily; touch timefile'

Use snooze inline, run a mirror script every hour at 30 minutes past, but ensure there are at least 20 minutes in between.

set -e
snooze -H'*' -M30 -t timefile -T 20m
touch timefile  # remove this if instantly retrying on failure were ok
mirrorallthethings
touch timefile

Use snooze inline, cron-style mail:

set -e
snooze ...
actualjob >output 2>&1 ||
	mail -s "$(hostname): snooze job failed with status $?" root <output

Snooze for rate-limiting a general purpose runit service: don't restart faster than every two minutes. (Note that after a crash with a daemon runtime of more than two minutes, it will be restarted immediately):

set -e
snooze -H'*' -M'*' -S'*' -t timefile -T 2m
touch timefile
exec mydaemond

Installation

Use make all to build, make install to install relative to PREFIX (/usr/local by default). The DESTDIR convention is respected. You can also just copy the binary into your PATH.

Copyright

snooze is in the public domain.

To the extent possible under law, Leah Neukirchen leah@vuxu.org has waived all copyright and related or neighboring rights to this work.

http://creativecommons.org/publicdomain/zero/1.0/