/mpls-with-ansible

mpls with ansible and jinja2

Primary LanguageJinja

The Repo Inlucde all the Ansible playbooks and Roles which outlines how to interact with Juniper Devices using Ansible as outlined in CH03 of the Network Automation Cookbook.

All Our network topology and network design is mainly defined under the group_vars/all.yml

Below are the main playbooks and tasks implemented

1. Enable NETCONF

Run the playbook pb_jnpr_net_build.yml with the netconf tag as shown below

ansible-playbook pb_jnpr_net_build.yml --tag netconf

2. Basic Device Configuration

In order to setup the basic system parameters like Uses and DNS run the playbook as shown below

ansible-playbook pb_jnpr_basic_config.yml --tags system

In order to setup Interfaces run the playbook as shown below

ansible-playbook pb_jnpr_basic_config.yml --tags intf

3. Build Network Configuration

In order to generate the configuration for Our Demo Network which includes the configuration for the following

  • Interfaces
  • OSPF
  • MPLS
  • BGP

We run the following playbook as shown below

ansible-playbook pb_jnpr_net_build.yml --tags build

All the configuration for all the devices will be generated on the ##configs directory

We push the generated configuration onto the devices as shown below

ansible-playbook pb_jnpr_net_build.yml --tags deploy

4. Validate Network Setup

We can use multiple playbooks to validate Network State as shown below

  • We can validate the Physical interface status and build basic System reports using junos_facts module as shown below
ansible-playbook pb_jnpr_facts.yml
  • We can Validate OSPF peering status using junos_command and assert module as shown below
ansible-playbook pb_get_ospf_peers.yml
  • We can validate BGP Status using JunOS PyeZ Tables as shown below
ansible-playbook pb_jnpr_pyez_table.yml --diff
  • We Can validate Network Reachability using junos_ping as shown below
ansible-playbook pb_junos_ping.yml

5. Deploy L3VPN

We define our L3VPN setup in the l3vpn.yml file and we can deploy L3VPN using junos_l3vpn with the below playbook

ansible-playbook pb_junos_l3vpn.yml