`gha-buildevents` Action

This GitHub Action instruments your workflows using Honeycomb's buildevents tool. It populates the trace with metadata from the GitHub Actions environment and will always send a trace for the build, even if the build failed.

gha-buildevents has to be added to every job that should be instrumented.

⚠️ Limitations

if downloading or executing buildevents fails, the entire job will fail

📣 Adopting version 2.0.0

The input field job-status has been renamed to status. This is no longer required in every job. This was done because status can now be job status or workflow status. We still support job-status but will give a warning that it is deprecated and encourage the switch to the status field.
status is no longer required in every job because including the status field ends a trace. For multi job workflows this is only required as part of the last job or the job that will end the trace.
Each Job MUST include unique STEP IDs to ensure each job's spans are properly organized together.
- An example of adopting these changes is in the Integration Worflow of this repo. Here is the corresponding trace:

How to use it

Single Job Workflow

- uses: honeycombio/gha-buildevents@v2
  with:
    # Required: a Honeycomb API key - needed to send traces.
    apikey: ${{ secrets.BUILDEVENT_APIKEY }}

    # Required: the Honeycomb dataset to send traces to.
    dataset: gha-buildevents_integration

    # Required on the final job: status, this will be used in the post section and sent
    # as status of the trace.
    # Note: in V1 this was called job-status which has been deprecated
    status: ${{ job.status }}

    # Optional: this should only be used in combination with matrix builds. Set
    # this to a value uniquely describing each matrix configuration.
    matrix-key: ${{ matrix.value }}

# ... the rest of your job ...

# gha-buildevents will automatically run as a post action and execute 'buildevents build'

Multi Job Workflow

In the FIRST JOB

the-job-that-runs-first:
  runs-on: ubuntu-latest

  steps:
    - name: Set trace-start
      id: set-trace-start
      run: |
        echo "trace-start=$(date +%s)" >> $GITHUB_OUTPUT
    - uses: honeycombio/gha-buildevents@v2
      with:
        # Required: a Honeycomb API key - needed to send traces.
        apikey: ${{ secrets.BUILDEVENT_APIKEY }}

        # Required: the Honeycomb dataset to send traces to.
        dataset: gha-buildevents_integration

        # Optional: this should only be used in combination with matrix builds. Set
        # this to a value uniquely describing each matrix configuration.
        matrix-key: ${{ matrix.value }}

  # ... the rest of your job ...
  outputs:
      trace-start: ${{ steps.set-trace-start.outputs.trace-start }}

# ... Job 2 ...

NOTE:

The step to start the workflow's trace should run first (before other jobs too). You do not need to start the trace in subsequent jobs.

The output is important. This is the trace-start timestamp and will be used by the LAST job to ensure the duration of the full trace is correct.

Add the new LAST JOB

end-trace:
  runs-on: ubuntu-latest
  needs: [the-job-that-runs-first, job2]
  if: ${{ always() }}
  steps:
  - uses: technote-space/workflow-conclusion-action@v3
  - uses: honeycombio/gha-buildevents@v2
    with:
      # Required: a Honeycomb API key - needed to send traces.
      apikey: ${{ secrets.BUILDEVENT_APIKEY }}

      # Required: the Honeycomb dataset to send traces to.
      dataset: gha-buildevents_integration

        # Required on the final job: status, this will be used in the post section and sent
        # as status of the trace.
        # Note: in V1 this was called job-status which has been deprecated
      status: ${{ env.WORKFLOW_CONCLUSION }}

      # Optional: trace-start, this will be used in the post section and sent
      # to calculate duration of the trace. In multi job workflows, set on the final job of a workflow. Not necessary for single job workflows
      trace-start: ${{ needs.build.outputs.trace-start}}

      # Optional: this should only be used in combination with matrix builds. Set
      # this to a value uniquely describing each matrix configuration.
      matrix-key: ${{ matrix.value }}

# gha-buildevents will automatically run as a post action and execute 'buildevents build'

gha-buildevents is a wrapping action. This means it has a post section which will run at the end of the build, after all other steps. In this final step the trace is finalized using buildevents build. Since this step runs always, even if the job failed, you don't have to worry about traces not being sent.

Inputs

Name	Required	Description	Type
`apikey`	yes	API key used to communicate with the Honeycomb API.	string
`dataset`	yes	Honeycomb dataset to use.	string
`status`	yes	The job or workflow status	string
`matrix-key`	no	Set this to a key unique for this matrix cell.	string
`send-init-event`	no	Whether to send an event representing the action setup.	string

Additionally, the following environment variable will be read:

BUILDEVENT_FILE: the path to a file containing additional key-value pairs. Data in this file will be attached to every span sent by buildevents. If this environment variable is not set, gha-buildevents will set this to a location outside the working directory. When setting this environment variable, is recommended to set this at the beginning of the workflow.

Outputs

No outputs are set, but the following environment variables are set:

TRACE_ID: the trace ID is a combination of the repository, the workflow, the job name, the run number, the run attempt, and optionally a matrix key. This trace ID will be unique across re-runs of the workflow. The format:

<owner>/<repo>-<workflow>-<job>-<run number>-<run attempt>

For example: honeycombio/gha-buildevents-Integration-smoke-test-20144-1.

Example

This repository has its own workflow which will run every hour. See .github/workflows/integration.yaml.

This workflow will create the following trace in Honeycomb:

Going further

Adding arbitrary key-value pairs

To add additional fields to the events sent to Honeycomb, edit the file at the environment variable BUILDEVENT_FILE. This file follows the logfmt style.

The BUILDEVENT_FILE environment variable should not be changed during the run, instead it is recommended to configure it at the top-level of your workflow:

env:
  BUILDEVENT_FILE: '../buildevents.txt'

Adding additional spans

After gha-buildevents has run, buildevents will be available on the path. You can use the buildevents executable to add additional spans.

gha-buildevents sets an environment variable TRACE_ID. The trace ID should be used with all buildevents commands to ensure the trace is continued.

To learn more about buildevents and how to use it, checkout [honeycombio/buildevents][buildevents].

  # Record the start of the step and, for convenience, set the step ID that will
  # be used for all commands.
- run: |
    echo "STEP_ID=0" >> ${GITHUB_ENV}
    echo "STEP_START=$(date +%s)" >> ${GITHUB_ENV}

  # Wrap the commands that should be traced with 'buildevents cmd'
- run: |
    buildevents cmd $TRACE_ID $STEP_ID sleep-5 -- sleep 5

  # Wrap up the step
- run: |
    buildevents step $TRACE_ID $STEP_ID $STEP_START 'step 1'

License

This Action is distributed under the terms of the MIT license, see LICENSE for details.

Contributor Alums ❤️

The buildevents GitHub Action was created for the community and generously bequethed to Honeycomb by Koenraad Verheyden (@kvrhdn).

honeycombio/gha-buildevents

gha-buildevents Action