This is a "plugin" for the Video Disk Recorder (VDR).
Written by: Jörg Wendel <vdr@jwendel.de>
Project's homepage: URL
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
See the file COPYING for more information.
Description:
Make shure that vdr user has sufficiant priveleges to Access the USB serial port.
e.g. to ensure use an udev.rule like this:
KERNEL=="ttyUSB?", OWNER="vdr", ATTRS{product}=="SEDU Board USB", SYMLINK+="ttySEDU"
Adjust the seduconf.pl cofig script to generate a suiteable seduatmo.conf according to your configuration and place it in plugin cond dir.
Blacklevel = 5 -> brightness for blacklevel
DetectCineBars = 2 -> 0- horizontal; 1 - vertical; 2 - both
FixedColorBlue = 0 -> B level of fixek color (0-255)
FixedColorGreen = 101 -> G level of fixek color (0-255)
FixedColorRed = 111 -> R level of fixek color (0-255)
Frequence = 25 -> frequency
Gamma = 14 -> Gamma correction (divided by 10)
HorizontalDepht = 2 -> Number of PIX extend into screen on left/right, 0 for the most outer one only
VerticalDepht = 1 -> Number of PIX extend into screen at top/bot, 0 for the most outer one only
LevelBlue = 70 -> white calibration level blue(0-255)
LevelGreen = 100 -> white calibration level green(0-255)
LevelRed = 57 -> white calibration level red(0-255)
LogLevel = 0 -> log Level (0-2)
SeduMode = 0 -> Protocol: 0 – miniDMX (only A2/512Byte), 1 - tpm2
SeduRgbOrder = BGR -> ;)
ShowMainmenu = 1 -> ;)
Threshold = 17 -> level for black level detection, dark led until all LED below this threshold
ViewMode = 0 -> 0 - atmo; 1 - fixed color; 2 - off
Blacklevel = 5 -> Helligkeitslevel bei Schwarzem Bild
DetectCineBars = 2 -> 0- horizontal; 1 - vertical; 2 - both
FixedColorBlue = 0 -> B Wert für Fixed Color (0-255)
FixedColorGreen = 101 -> G Wert für Fixed Color (0-255)
FixedColorRed = 111 -> R Wert für Fixed Color (0-255)
Frequence = 25 -> refresh Frequenz
Gamma = 14 -> Gamma Korrektur (wird durch 10 geteilt)
HorizontalDepht = 2 -> Anzahl der Pixel die seitlich in das Bild hinein herangezogen werden, 0 für nur das äußere
VerticalDepth = 1 -> Anzahl der Pixel die oben und unten in das Bild hineinragen , 0 für nur das äußere
LevelBlue = 70 -> Weißabgleich B (0-255)
LevelGreen = 100 -> Weißabgleich G (0-255)
LevelRed = 57 -> Weißabgleich R (0-255)
LogLevel = 0 -> log Level (0-2)
SeduMode = 0 -> Protokoll: 0 – miniDMX (nur A2/512Byte), 1 - tpm2
SeduRgbOrder = BGR -> ;)
ShowMainmenu = 1 -> ;)
Threshold = 17 -> Schwellwert für Schwarzerkennung, liegen alle drei Farben eines Pixel darunter bleibt die LED aus
ViewMode = 0 -> 0 - atmo; 1 - fixed color; 2 - off