JoyCon-Driver

A vJoy feeder / Driver for the Nintendo Switch JoyCons and Pro Controller on Windows with analog stick support and motion controls

How to use

Install vJoy, here: http://vjoystick.sourceforge.net/site/
Setup your vJoy Devices to look like this (search for configure vJoy in Windows search):
- Add a device for every controller you have, so if you have 4 JoyCons and 1 Pro Controller, enable 5 devices
Pair the JoyCon(s) / Pro Controller(s) to your PC
Run the Application, if it doesn't detect your JoyCon(s) / Pro Controller, make sure they are fully paired / connected and restart the program.
- For the latest features and updates, just click check for updates, updating is (mostly) automatic
Once the program is running vJoy should register the input from the JoyCon(s) / Pro Controller.
- To verify it's working you can use the vJoy monitor that comes with vJoy, it should look something like this: http://i.imgur.com/x4Fn7Cq.png
- To re-pair the JoyCon(s) / Pro Controller go into Settings and remove them and then pair them again.
- You'll likely want to use this with something like x360ce (http://www.x360ce.com), which will let you map the vJoy device to a virtual xbox controller for games that support them.
Here's a screenshot of the actual program:

Combine JoyCons
- Combines a pair of JoyCons into a single vJoy device
Reverse Stick X/Y
- Reverses the X/Y direction(s) for both sticks
Gyro Controls
- Enables controlling the mouse with a JoyCon like a WiiMote
Prefer Left JoyCon
- By default, the right JoyCon is used (if found), this forces the program to use the left JoyCon (if found)
Gyro Controls Sensitivity X/Y
- Controls the sensitivity -> higher = more sensitive
- The X sensitivity also controls the gyro sensitivity for Rz/sl0/sl1 in vJoy
Gyroscope Combo Code
- A number that tells the program which button or set of buttons to use to toggle gyro controls
- To figure out what number to put in the config, look at the Gyro Combo Code when you press your desired keycombo
Quick Toggle Gyro
- Changes the behavior of the Gyro toggle from a standard switch, to a "always off unless keycombo is pressed" mode
Invert Quick Toggle
- Changes the behavior of the quick toggle from always off unless keycombo is pressed to always on unless keycombo is pressed
Gyro Window
- Opens up a visualizer for the JoyCon's gyroscope
Dolphin Mode
- Makes it so that the Rz/sl0/sl1 sliders in vJoy don't reset back to 0 when the JoyCon stops moving
Mario Theme
- Plays the Mario theme on the first connected JoyCon at startup
Debug Mode
- Prints debug info to the console
Write Debug to File
- Writes the debug info to a file
Force Poll Update
- Don't use this, probably
Broadcast mode
- Don't use this, probably

The JoyCons need to be re-paired anytime after they've reconnected to the switch

If you have any questions you can contact me on discord (fosse#0430) twitter (@fossephate) or even my email fossephate@gmail.com
You can also join the discord server here: https://discord.gg/jmcfdeS