hsgw/plaid

Issues

• Can you make a gerber file for the bottom pcb?

  #40 opened a year ago by AngelSaid16
  1

• Gerber files for main pcb, switch plate, bottom plate

  #39 opened a year ago by synwt
  3

• Help with build, keyboard or usbasp not appearing on my connected devices

  #10 opened 5 years ago by miguelangelramirez
  24

• Switch plate compatibility (for hotswap)

  #38 opened 3 years ago by Producdevity
  3

• [platforms/avr/flash.mk:181: flash] Segmentation fault

  #37 opened 3 years ago by Shredcrab
  1

• Keyboard lag

  #36 opened 3 years ago by richard-davey-arcadisgen
  3

• USB Device Unknown Descriptor after build

  #35 opened 3 years ago by rwcts
  14

• Verification error when flashing bootloader.

  #33 opened 4 years ago by Tenkir
  5

• Connect OLED?

  #30 opened 4 years ago by denisinvader
  4

• BOM list for the UK / EU

  #32 opened 4 years ago by benc3d
  1

• Need help

  #31 opened 4 years ago by 4dvn
  1

• Micro USB female connector type

  #34 opened 4 years ago by Daveyr
  1

• Wrong keypresses being sent.

  #15 opened 5 years ago by ekosynth
  5

• Back space and windows key are not working

  #19 opened 4 years ago by avifo
  1

• Change fuse value

  #28 opened 4 years ago by raffifu
  1

• What are the diameters for the screws?

  #26 opened 4 years ago by CrisHale
  3

• BOM Parts

  #5 opened 6 years ago by xxmxxxxxy
  3

• Update Files for USB-C Support

  #22 opened 4 years ago by Tenkir
  10

• What are resistors R5 and R6?

  #23 opened 4 years ago by CrisHale
  1

• Do I need libusbK?

  #24 opened 4 years ago by CrisHale
  1

• Should I have nuts?

  #25 opened 4 years ago by CrisHale
  2

• USB device is unrecognised

  #21 opened 4 years ago by CrisHale
  0

• PCB fab?

  #18 opened 5 years ago by georges
  2

• Unclear documentation

  #20 opened 4 years ago by CrisHale
  5

• Running "make plaid:default" fails (Error 128)

  #13 opened 5 years ago by rjth
  3

• Led series resistor value

  #14 opened 5 years ago by BenRoe
  2

• Trying to open .sch file on Kicad, symbols display question marks

  #9 opened 6 years ago by miguelangelramirez
  7

• Support for a rotary encoder

  #12 opened 5 years ago by To1ne
  1

• Cannot enter bootloader mode

  #11 opened 5 years ago by nguyenhimself
  2

• make plaid:default:program fails with avr-gcc 8

  #6 opened 6 years ago
  3

• PCB Rev.Alpha issues

  #1 opened 6 years ago by hsgw
  1

• Resistor slots are too short for 10k and 1.5k resistors

  #2 opened 6 years ago by themoonisacheese
  1