Firmware | Descripción |
---|---|
Task_FreeRTOS | Basic Blink Example from ESP-IDF |
Task scheduler | Testing Task and MultiCore |
Task notifaction 1 | Simple basic Task Notification Example |
Task notifaction 2 | Send data with a Task Notification |
Semaphores Test | Basic Binary Semaphore Test |
Semaphores_Mutex | Basic Mutex Semaphore Test |
Semaphores_Mutex 2 | Basic Mutex Semaphore Test 2 |
Semaphores_Counter | Basic Counting Semaphore Test |
cxColas1 - Queue 1 | Sending Data From Task1 to Task2 Using Queue |
cxColas2 - Queue 2 | Sending Data From Task1 and Task2 to Task3 Using Queue |
timerSoftware | Basic Software Timer Configuration |
EventsGroup - 1 | Synchronizing a Task Using Event Groups |
EventsGroup - 2 | Synchronizing One, Two, and Three Tasks at the Same Time Using Event Groups |
uart_DEMO | Configuration of ESP32 UART port and sending a "OK" msn checking the signal with a logic analyzer |
uart_ECO | UART Eco |
uart_rx_tx_task | Using tasks to TX and RX to validate de cx with the UART port |
DHT Sensor | Example digital temperature and humidity sensor - DHT sensors |
i2c_scanner | Configure i2c port and scan all the devices on it |
i2c_PCA9548a | Using i2c multiplexer PCA9548 as example of i2c por configuration |
i2c_PCA_MPU6050 | Getting data from the mpu6050 sensor, using i2c multiplexer PCA9548 |
spidemo_DAC | Configuration of the DAC mcp4822 using the spi port |
Timergroup | Configuration of Timer by Hardware |
WiFi_Basic | Wi-Fi Basic Connection |
WiFI Scanner | Wi-Fi Scanner |
WiFI NTP | Wi-Fi NTP Connection |
WiFI Connect | Wi-Fi Connect Library |
WiFI GetData | Wi-Fi Get Data From Internet |
WiFI MQTT | Wi-Fi MQTT Protocol |
[1] https://www.freertos.org/a00106.html
[2] https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/index.html