Issues
- 1
Add GTK or Qt GUI
#32 opened by htoigo - 3
Tested Code Coverage should be at least 75%.
#31 opened by htoigo - 2
Add "toekick_materials" and "toekick_height" to cabinet.py and gui for PDF page 2 utilization
#10 opened by L33B072 - 2
Add handling of countertop and toekick.
#9 opened by htoigo - 0
If job only requires one cabinet, summary line of job overview says, `1 cabinets'.
#36 opened by htoigo - 1
Implement CI
#34 opened by htoigo - 2
Add Code Coverage Measurement
#33 opened by htoigo - 0
Inconsistent use of newlines in different sections of job spec & unneeded def of wrap().
#38 opened by htoigo - 0
Add web and/or mobile (app) interface.
#37 opened by htoigo - 1
If job only requires one cabinet, summary line of job overview prints `1 cabinets.'
#35 opened by htoigo - 1
- 1
Job wants 0" or too-narrow fillers
#25 opened by htoigo - 6
Separate bottom thickness not functional
#20 opened by htoigo - 0
Cannot see all output on small screen
#26 opened by htoigo - 8
Change cutlist panel drawing material string.
#3 opened by htoigo - 0
Cutlist isometric view back panel too thick.
#12 opened by htoigo - 0
- 0
- 5
Modify materials and thicknesses.
#7 opened by htoigo - 0
Cutlist header always says "Both ends open".
#11 opened by htoigo - 0
Cutlist isometric view depth dimension incorrect.
#13 opened by htoigo - 2
iso45 lines not to scale.
#4 opened by htoigo - 2
Reduce margins of cutlist.
#2 opened by htoigo - 0
Only allow 2 doors per cabinet.
#6 opened by htoigo