JWT

A ruby implementation of the RFC 7519 OAuth JSON Web Token (JWT) standard.

If you have further questions related to development or usage, join us: ruby-jwt google group.

Announcements

Ruby 1.9.3 support was dropped at December 31st, 2016.
Version 1.5.3 yanked. See: #132 and #133

Installing

Using Rubygems:

sudo gem install jwt

Using Bundler:

Add the following to your Gemfile

gem 'jwt'

And run bundle install

Algorithms and Usage

The JWT spec supports NONE, HMAC, RSASSA, ECDSA and RSASSA-PSS algorithms for cryptographic signing. Currently the jwt gem supports NONE, HMAC, RSASSA and ECDSA. If you are using cryptographic signing, you need to specify the algorithm in the options hash whenever you call JWT.decode to ensure that an attacker cannot bypass the algorithm verification step. It is strongly recommended that you hard code the algorithm, as you may leave yourself vulnerable by dynamically picking the algorithm

See: JSON Web Algorithms (JWA) 3.1. "alg" (Algorithm) Header Parameter Values for JWS

NONE

none - unsigned token

require 'jwt'

payload = { data: 'test' }

# IMPORTANT: set nil as password parameter
token = JWT.encode payload, nil, 'none'

# eyJhbGciOiJub25lIn0.eyJkYXRhIjoidGVzdCJ9.
puts token

# Set password to nil and validation to false otherwise this won't work
decoded_token = JWT.decode token, nil, false

# Array
# [
#   {"data"=>"test"}, # payload
#   {"alg"=>"none"} # header
# ]
puts decoded_token

HMAC

HS256 - HMAC using SHA-256 hash algorithm
HS512256 - HMAC using SHA-512-256 hash algorithm (only available with RbNaCl; see note below)
HS384 - HMAC using SHA-384 hash algorithm
HS512 - HMAC using SHA-512 hash algorithm

hmac_secret = 'my$ecretK3y'

token = JWT.encode payload, hmac_secret, 'HS256'

# eyJhbGciOiJIUzI1NiJ9.eyJkYXRhIjoidGVzdCJ9.pNIWIL34Jo13LViZAJACzK6Yf0qnvT_BuwOxiMCPE-Y
puts token

decoded_token = JWT.decode token, hmac_secret, true, { algorithm: 'HS256' }

# Array
# [
#   {"data"=>"test"}, # payload
#   {"alg"=>"HS256"} # header
# ]
puts decoded_token

Note: If RbNaCl is loadable, ruby-jwt will use it for HMAC-SHA256, HMAC-SHA512-256, and HMAC-SHA512. RbNaCl enforces a maximum key size of 32 bytes for these algorithms.

RbNaCl requires libsodium, it can be installed on MacOS with brew install libsodium.

RSA

RS256 - RSA using SHA-256 hash algorithm
RS384 - RSA using SHA-384 hash algorithm
RS512 - RSA using SHA-512 hash algorithm

rsa_private = OpenSSL::PKey::RSA.generate 2048
rsa_public = rsa_private.public_key

token = JWT.encode payload, rsa_private, 'RS256'

# eyJhbGciOiJSUzI1NiJ9.eyJkYXRhIjoidGVzdCJ9.GplO4w1spRgvEJQ3-FOtZr-uC8L45Jt7SN0J4woBnEXG_OZBSNcZjAJWpjadVYEe2ev3oUBFDYM1N_-0BTVeFGGYvMewu8E6aMjSZvOpf1cZBew-Vt4poSq7goG2YRI_zNPt3af2lkPqXD796IKC5URrEvcgF5xFQ-6h07XRDpSRx1ECrNsUOt7UM3l1IB4doY11GzwQA5sHDTmUZ0-kBT76ZMf12Srg_N3hZwphxBtudYtN5VGZn420sVrQMdPE_7Ni3EiWT88j7WCr1xrF60l8sZT3yKCVleG7D2BEXacTntB7GktBv4Xo8OKnpwpqTpIlC05dMowMkz3rEAAYbQ
puts token

decoded_token = JWT.decode token, rsa_public, true, { algorithm: 'RS256' }

# Array
# [
#   {"data"=>"test"}, # payload
#   {"alg"=>"RS256"} # header
# ]
puts decoded_token

ECDSA

ES256 - ECDSA using P-256 and SHA-256
ES384 - ECDSA using P-384 and SHA-384
ES512 - ECDSA using P-521 and SHA-512

ecdsa_key = OpenSSL::PKey::EC.new 'prime256v1'
ecdsa_key.generate_key
ecdsa_public = OpenSSL::PKey::EC.new ecdsa_key
ecdsa_public.private_key = nil

token = JWT.encode payload, ecdsa_key, 'ES256'

# eyJhbGciOiJFUzI1NiJ9.eyJkYXRhIjoidGVzdCJ9.AlLW--kaF7EX1NMX9WJRuIW8NeRJbn2BLXHns7Q5TZr7Hy3lF6MOpMlp7GoxBFRLISQ6KrD0CJOrR8aogEsPeg
puts token

decoded_token = JWT.decode token, ecdsa_public, true, { algorithm: 'ES256' }

# Array
# [
#    {"test"=>"data"}, # payload
#    {"alg"=>"ES256"} # header
# ]
puts decoded_token

EDDSA

In order to use this algorithm you need to add the RbNaCl gem to you Gemfile.

gem 'rbnacl'

For more detailed installation instruction check the official repository on GitHub.

ED25519

private_key = RbNaCl::Signatures::Ed25519::SigningKey.new('abcdefghijklmnopqrstuvwxyzABCDEF')
public_key = private_key.verify_key
token = JWT.encode payload, private_key, 'ED25519'

# eyJhbGciOiJFRDI1NTE5In0.eyJkYXRhIjoidGVzdCJ9.6xIztXyOupskddGA_RvKU76V9b2dCQUYhoZEVFnRimJoPYIzZ2Fm47CWw8k2NTCNpgfAuxg9OXjaiVK7MvrbCQ
puts token

decoded_token = JWT.decode token, public_key, true, { algorithm: 'ED25519' }
# Array
# [
#  {"test"=>"data"}, # payload
#  {"alg"=>"ED25519"} # header
# ]

RSASSA-PSS

In order to use this algorithm you need to add the openssl gem to you Gemfile with a version greater or equal to 2.1.

gem 'openssl', '~> 2.1'

PS256 - RSASSA-PSS using SHA-256 hash algorithm
PS384 - RSASSA-PSS using SHA-384 hash algorithm
PS512 - RSASSA-PSS using SHA-512 hash algorithm

rsa_private = OpenSSL::PKey::RSA.generate 2048
rsa_public = rsa_private.public_key

token = JWT.encode payload, rsa_private, 'PS256'

# eyJhbGciOiJQUzI1NiJ9.eyJkYXRhIjoidGVzdCJ9.KEmqagMUHM-NcmXo6818ZazVTIAkn9qU9KQFT1c5Iq91n0KRpAI84jj4ZCdkysDlWokFs3Dmn4MhcXP03oJKLFgnoPL40_Wgg9iFr0jnIVvnMUp1kp2RFUbL0jqExGTRA3LdAhuvw6ZByGD1bkcWjDXygjQw-hxILrT1bENjdr0JhFd-cB0-ps5SB0mwhFNcUw-OM3Uu30B1-mlFaelUY8jHJYKwLTZPNxHzndt8RGXF8iZLp7dGb06HSCKMcVzhASGMH4ZdFystRe2hh31cwcvnl-Eo_D4cdwmpN3Abhk_8rkxawQJR3duh8HNKc4AyFPo7SabEaSu2gLnLfN3yfg
puts token

decoded_token = JWT.decode token, rsa_public, true, { algorithm: 'PS256' }

# Array
# [
#   {"data"=>"test"}, # payload
#   {"alg"=>"PS256"} # header
# ]
puts decoded_token

Support for reserved claim names

JSON Web Token defines some reserved claim names and defines how they should be used. JWT supports these reserved claim names:

'exp' (Expiration Time) Claim
'nbf' (Not Before Time) Claim
'iss' (Issuer) Claim
'aud' (Audience) Claim
'jti' (JWT ID) Claim
'iat' (Issued At) Claim
'sub' (Subject) Claim

Add custom header fields

Ruby-jwt gem supports custom header fields To add custom header fields you need to pass header_fields parameter

token = JWT.encode payload, key, algorithm='HS256', header_fields={}

Example:

require 'jwt'

payload = { data: 'test' }

# IMPORTANT: set nil as password parameter
token = JWT.encode payload, nil, 'none', { typ: 'JWT' }

# eyJhbGciOiJub25lIiwidHlwIjoiSldUIn0.eyJkYXRhIjoidGVzdCJ9.
puts token

# Set password to nil and validation to false otherwise this won't work
decoded_token = JWT.decode token, nil, false

# Array
# [
#   {"data"=>"test"}, # payload
#   {"typ"=>"JWT", "alg"=>"none"} # header
# ]
puts decoded_token

Expiration Time Claim

From Oauth JSON Web Token 4.1.4. "exp" (Expiration Time) Claim:

The exp (expiration time) claim identifies the expiration time on or after which the JWT MUST NOT be accepted for processing. The processing of the exp claim requires that the current date/time MUST be before the expiration date/time listed in the exp claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing a NumericDate value. Use of this claim is OPTIONAL.

Handle Expiration Claim

exp = Time.now.to_i + 4 * 3600
exp_payload = { data: 'data', exp: exp }

token = JWT.encode exp_payload, hmac_secret, 'HS256'

begin
  decoded_token = JWT.decode token, hmac_secret, true, { algorithm: 'HS256' }
rescue JWT::ExpiredSignature
  # Handle expired token, e.g. logout user or deny access
end

Adding Leeway

exp = Time.now.to_i - 10
leeway = 30 # seconds

exp_payload = { data: 'data', exp: exp }

# build expired token
token = JWT.encode exp_payload, hmac_secret, 'HS256'

begin
  # add leeway to ensure the token is still accepted
  decoded_token = JWT.decode token, hmac_secret, true, { exp_leeway: leeway, algorithm: 'HS256' }
rescue JWT::ExpiredSignature
  # Handle expired token, e.g. logout user or deny access
end

Not Before Time Claim

From Oauth JSON Web Token 4.1.5. "nbf" (Not Before) Claim:

The nbf (not before) claim identifies the time before which the JWT MUST NOT be accepted for processing. The processing of the nbf claim requires that the current date/time MUST be after or equal to the not-before date/time listed in the nbf claim. Implementers MAY provide for some small leeway, usually no more than a few minutes, to account for clock skew. Its value MUST be a number containing a NumericDate value. Use of this claim is OPTIONAL.

Handle Not Before Claim

nbf = Time.now.to_i - 3600
nbf_payload = { data: 'data', nbf: nbf }

token = JWT.encode nbf_payload, hmac_secret, 'HS256'

begin
  decoded_token = JWT.decode token, hmac_secret, true, { algorithm: 'HS256' }
rescue JWT::ImmatureSignature
  # Handle invalid token, e.g. logout user or deny access
end

Adding Leeway

nbf = Time.now.to_i + 10
leeway = 30

nbf_payload = { data: 'data', nbf: nbf }

# build expired token
token = JWT.encode nbf_payload, hmac_secret, 'HS256'

begin
  # add leeway to ensure the token is valid
  decoded_token = JWT.decode token, hmac_secret, true, { nbf_leeway: leeway, algorithm: 'HS256' }
rescue JWT::ImmatureSignature
  # Handle invalid token, e.g. logout user or deny access
end

Issuer Claim

From Oauth JSON Web Token 4.1.1. "iss" (Issuer) Claim:

The iss (issuer) claim identifies the principal that issued the JWT. The processing of this claim is generally application specific. The iss value is a case-sensitive string containing a StringOrURI value. Use of this claim is OPTIONAL.

You can pass multiple allowed issuers as an Array, verification will pass if one of them matches the iss value in the payload.

iss = 'My Awesome Company Inc. or https://my.awesome.website/'
iss_payload = { data: 'data', iss: iss }

token = JWT.encode iss_payload, hmac_secret, 'HS256'

begin
  # Add iss to the validation to check if the token has been manipulated
  decoded_token = JWT.decode token, hmac_secret, true, { iss: iss, verify_iss: true, algorithm: 'HS256' }
rescue JWT::InvalidIssuerError
  # Handle invalid token, e.g. logout user or deny access
end

Audience Claim

From Oauth JSON Web Token 4.1.3. "aud" (Audience) Claim:

The aud (audience) claim identifies the recipients that the JWT is intended for. Each principal intended to process the JWT MUST identify itself with a value in the audience claim. If the principal processing the claim does not identify itself with a value in the aud claim when this claim is present, then the JWT MUST be rejected. In the general case, the aud value is an array of case-sensitive strings, each containing a StringOrURI value. In the special case when the JWT has one audience, the aud value MAY be a single case-sensitive string containing a StringOrURI value. The interpretation of audience values is generally application specific. Use of this claim is OPTIONAL.

aud = ['Young', 'Old']
aud_payload = { data: 'data', aud: aud }

token = JWT.encode aud_payload, hmac_secret, 'HS256'

begin
  # Add aud to the validation to check if the token has been manipulated
  decoded_token = JWT.decode token, hmac_secret, true, { aud: aud, verify_aud: true, algorithm: 'HS256' }
rescue JWT::InvalidAudError
  # Handle invalid token, e.g. logout user or deny access
  puts 'Audience Error'
end

JWT ID Claim

From Oauth JSON Web Token 4.1.7. "jti" (JWT ID) Claim:

The jti (JWT ID) claim provides a unique identifier for the JWT. The identifier value MUST be assigned in a manner that ensures that there is a negligible probability that the same value will be accidentally assigned to a different data object; if the application uses multiple issuers, collisions MUST be prevented among values produced by different issuers as well. The jti claim can be used to prevent the JWT from being replayed. The jti value is a case-sensitive string. Use of this claim is OPTIONAL.

# Use the secret and iat to create a unique key per request to prevent replay attacks
jti_raw = [hmac_secret, iat].join(':').to_s
jti = Digest::MD5.hexdigest(jti_raw)
jti_payload = { data: 'data', iat: iat, jti: jti }

token = JWT.encode jti_payload, hmac_secret, 'HS256'

begin
  # If :verify_jti is true, validation will pass if a JTI is present
  #decoded_token = JWT.decode token, hmac_secret, true, { verify_jti: true, algorithm: 'HS256' }
  # Alternatively, pass a proc with your own code to check if the JTI has already been used
  decoded_token = JWT.decode token, hmac_secret, true, { verify_jti: proc { |jti| my_validation_method(jti) }, algorithm: 'HS256' }
rescue JWT::InvalidJtiError
  # Handle invalid token, e.g. logout user or deny access
  puts 'Error'
end

Issued At Claim

From Oauth JSON Web Token 4.1.6. "iat" (Issued At) Claim:

The iat (issued at) claim identifies the time at which the JWT was issued. This claim can be used to determine the age of the JWT. The leeway option is not taken into account when verifying this claim. The iat_leeway option was removed in version 2.2.0. Its value MUST be a number containing a NumericDate value. Use of this claim is OPTIONAL.

Handle Issued At Claim

iat = Time.now.to_i
iat_payload = { data: 'data', iat: iat }

token = JWT.encode iat_payload, hmac_secret, 'HS256'

begin
  # Add iat to the validation to check if the token has been manipulated
  decoded_token = JWT.decode token, hmac_secret, true, { verify_iat: true, algorithm: 'HS256' }
rescue JWT::InvalidIatError
  # Handle invalid token, e.g. logout user or deny access
end

Subject Claim

From Oauth JSON Web Token 4.1.2. "sub" (Subject) Claim:

The sub (subject) claim identifies the principal that is the subject of the JWT. The Claims in a JWT are normally statements about the subject. The subject value MUST either be scoped to be locally unique in the context of the issuer or be globally unique. The processing of this claim is generally application specific. The sub value is a case-sensitive string containing a StringOrURI value. Use of this claim is OPTIONAL.

sub = 'Subject'
sub_payload = { data: 'data', sub: sub }

token = JWT.encode sub_payload, hmac_secret, 'HS256'

begin
  # Add sub to the validation to check if the token has been manipulated
  decoded_token = JWT.decode token, hmac_secret, true, { sub: sub, verify_sub: true, algorithm: 'HS256' }
rescue JWT::InvalidSubError
  # Handle invalid token, e.g. logout user or deny access
end

JSON Web Key (JWK)

JWK is a JSON structure representing a cryptographic key. Currently only supports RSA public keys.

jwk = JWT::JWK.new(OpenSSL::PKey::RSA.new(2048))
payload, headers = { data: 'data' }, { kid: jwk.kid }

token = JWT.encode(payload, jwk.keypair, 'RS512', headers)

# The jwk loader would fetch the set of JWKs from a trusted source
jwk_loader = ->(options) do
  @cached_keys = nil if options[:invalidate] # need to reload the keys
  @cached_keys ||= { keys: [jwk.export] }
end

begin
  JWT.decode(token, nil, true, { algorithms: ['RS512'], jwks: jwk_loader})
rescue JWT::JWKError
  # Handle problems with the provided JWKs
rescue JWT::DecodeError
  # Handle other decode related issues e.g. no kid in header, no matching public key found etc. 
end

Development and Tests

We depend on Bundler for defining gemspec and performing releases to rubygems.org, which can be done with

rake release

The tests are written with rspec. Given you have installed the dependencies via bundler, you can run tests with

bundle exec rspec

If you want a release cut with your PR, please include a version bump according to Semantic Versioning

Contributors

See AUTHORS file.

License

See LICENSE file.

humio/ruby-jwt

JWT