hutscape/pine

Issues

• Add firmware features

  #15 opened 5 years ago by sayanee
  1

• Add debug statements in firmware

  #21 opened 4 years ago by sayanee
  1

• Try uploading the bootloader by converting an ST-Link into a Black Magic Probe

  #23 opened 4 years ago by sayanee
  1

• IR LED is not working

  #22 opened 4 years ago by sayanee
  3

• Temperature sensor does not work

  #20 opened 4 years ago by sayanee
  2

• Touching the MCU will start the program

  #18 opened 4 years ago by sayanee
  1

• Port will be detected upon intermittent plugging in and out the USB and pressing reset button

  #19 opened 4 years ago by sayanee
  1

• Silkscreen for SW1 is inverted.

  #17 opened 5 years ago by notthetup
  0

• Replace schottky diode

  #16 opened 5 years ago by sayanee
  1

• Comments on routing / layout

  #14 opened 5 years ago by sayanee
  6

• Last update before routing and schematic review

  #12 opened 5 years ago by sayanee
  0

• Update power tree schematic with the new LDO

  #11 opened 5 years ago by sayanee
  1

• Add LDO to main power components

  #10 opened 5 years ago by sayanee
  0

• Find out KiCad shortcuts

  #13 opened 5 years ago by sayanee
  0

• Optimize power savings for power LED

  #5 opened 5 years ago by sayanee
  1

• Pull out some unused pins for future experimentation

  #6 opened 5 years ago by sayanee
  2

• Add reference URLs for power measurement

  #7 opened 5 years ago by sayanee
  0

• Improve component placement

  #9 opened 5 years ago by sayanee
  4

• Add 3D models in proper paths and credits

  #8 opened 5 years ago by sayanee
  1

• Improve power management circuit

  #4 opened 5 years ago by sayanee
  2

• Connect GND of measuring batt to a digital GPIO pin

  #3 opened 5 years ago by sayanee
  1

• Create new footprint for USB Micro-B

  #2 opened 5 years ago by sayanee
  1

• Create user stories for feature set

  #1 opened 5 years ago by sayanee
  0