Pinned Repositories
Arduino-IRremote
Infrared remote library for Arduino: send and receive infrared signals with multiple protocols
ArduinoJson
📟 JSON library for Arduino and embedded C++. Simple and efficient.
AVR_Slow_PWM
This library enables you to use ISR-based PWM channels on AVR-based boards, such as Mega-2560, UNO,Nano, Leonardo, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're I
BLHeli
BLHeli for brushless ESC firmware
blynk-library
Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc.
docker-debs3
fathom-x
Ethernet capable tether interface board for the Fathom tether.
linux-uvcvideo-geopatch
Custom patched uvcvideo driver
Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
megaAVR_Slow_PWM
This library enables you to use ISR-based PWM channels on Arduino megaAVR boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is the
huynhsi681988's Repositories
huynhsi681988/Arduino-IRremote
Infrared remote library for Arduino: send and receive infrared signals with multiple protocols
huynhsi681988/ArduinoJson
📟 JSON library for Arduino and embedded C++. Simple and efficient.
huynhsi681988/AVR_Slow_PWM
This library enables you to use ISR-based PWM channels on AVR-based boards, such as Mega-2560, UNO,Nano, Leonardo, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is they're I
huynhsi681988/BLHeli
BLHeli for brushless ESC firmware
huynhsi681988/blynk-library
Blynk library for embedded hardware. Works with Arduino, ESP8266, Raspberry Pi, Intel Edison/Galileo, LinkIt ONE, Particle Core/Photon, Energia, ARM mbed, etc.
huynhsi681988/linux-uvcvideo-geopatch
Custom patched uvcvideo driver
huynhsi681988/Marlin
Marlin is an optimized firmware for RepRap 3D printers based on the Arduino platform. | Many commercial 3D printers come with Marlin installed. Check with your vendor if you need source code for your specific machine.
huynhsi681988/megaAVR_Slow_PWM
This library enables you to use ISR-based PWM channels on Arduino megaAVR boards, such as UNO WiFi Rev2, AVR_Nano_Every, etc., to create and output PWM any GPIO pin. It now supports 16 ISR-based PWM channels, while consuming only 1 Hardware Timer. PWM channel interval can be very long (ulong microsecs / millisecs). The most important feature is the
huynhsi681988/MySensors
MySensors library and examples
huynhsi681988/OpenBot
OpenBot leverages smartphones as brains for low-cost robots. We have designed a small electric vehicle that costs about $50 and serves as a robot body. Our software stack for Android smartphones supports advanced robotics workloads such as person following and real-time autonomous navigation.
huynhsi681988/openocd_pac5223
OpenOCD clone with our flash drivers for the PAC5223
huynhsi681988/openrov-arduino-cores
Core board/platform files for the SAMD21J18A set up for use on the OpenROV controller board.
huynhsi681988/openrov-cockpit
Web centric tele-robotic control system for ROVs
huynhsi681988/openrov-electronics
Electronics for OpenROV. Include schematics and other diagrams
huynhsi681988/openrov-hardware
Hardware for OpenROV. Include lasercut parts and other diagrams
huynhsi681988/openrov-image-customization
All of the OpenROV changes to a stalk Debian installation
huynhsi681988/openrov-proxy
huynhsi681988/openrov-software
Meta project for all of the OpenROV Software projects
huynhsi681988/openrov-software-arduino
Arduino projects for the OpenROV platform.
huynhsi681988/page-openrov-com
OpenROV static web page
huynhsi681988/photon
A DIY incident light meter
huynhsi681988/PWMMotorControl
Arduino library to control brushed DC motors by PWM and uses optional attached encoders to drive fixed distances..
huynhsi681988/resin-wifi-connect
Easy WiFi setup for Linux devices from your mobile phone or laptop
huynhsi681988/RF24
OSI Layer 2 driver for nRF24L01 on Arduino & Raspberry Pi/Linux Devices
huynhsi681988/saml21-experiment
SAMD21 firmware project for Trident. Makefile project that contains the entire firmware stack.
huynhsi681988/Serial-Studio
Multi-purpose serial data visualization & processing program
huynhsi681988/SimpleTimer
SimpleTimer library for Arduino
huynhsi681988/Tasmota
Alternative firmware for ESP8266 with easy configuration using webUI, OTA updates, automation using timers or rules, expandability and entirely local control over MQTT, HTTP, Serial or KNX. Full documentation at
huynhsi681988/Trident-Development-Kit
This folder contains information useful for interfacing external designs with the Trident ROV
huynhsi681988/trident-releases
Under development - Tracker for software releases