hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
C++GPL-2.0
Issues
- 19
Weird Noise and Flickering
#1655 opened - 4
FYI
#1654 opened - 13
Noob needs help with their setup
#1653 opened - 2
- 4
- 1
Can I use 4*4 matrix with your mod?
#1650 opened - 7
QiangLi P6 48x24 working not correct
#1649 opened - 6
- 8
Unknown panel don't work correctly
#1647 opened - 2
- 0
Makefile
#1645 opened - 4
64x64 Matrix Only Displays Red on Demo
#1644 opened - 19
- 13
Chain 4 RGB LED Matrix (64x32) for display
#1642 opened - 1
Is a new multiplex needed ?
#1641 opened - 11
- 0
- 0
Panel is split and not showing correctly
#1638 opened - 1
Half the screen is less bright
#1637 opened - 3
How can i display costum Content on my Matrix
#1636 opened - 3
Support for 160x80 panel
#1635 opened - 0
Having trouble with ‘make led-image-viewer’
#1634 opened - 0
[Q&A] Timing, variables, flickering
#1633 opened - 0
64x64 P3RGBO SE without E-channel
#1632 opened - 0
- 1
[Q&A] Old 8x32 panel without a,b,c.. lines
#1630 opened - 0
- 2
Demos work, utils dont
#1628 opened - 7
I don't like gpio_slowdown
#1627 opened - 6
- 12
Issue with Displaying Pixel Propperly
#1624 opened - 0
Halo around images - Python Binding image-viewer
#1623 opened - 0
DietPi recommendation doesn't seem to work
#1622 opened - 1
install in mambaforge
#1621 opened - 0
Language for Clock change
#1620 opened - 0
Python Runtext.py looping infinitely
#1619 opened - 4
HUB320 support
#1618 opened - 1
dtparam=audio=off is not working
#1616 opened - 0
Can't Change to 64w x 32h
#1615 opened - 0
random pixels at 2 of the 3 matrix
#1614 opened - 0
- 6
How would i set this up with a cron schedule?
#1611 opened - 1
Can't use other devices in parallel
#1610 opened - 13
- 4
Demo D0 not working on pi4
#1608 opened - 1
- 2
Led-image-viewer wont open any image format
#1606 opened - 8
Working on Pi3, gibberish on Pi4
#1605 opened - 42
Rasberry Pi 5 support?
#1603 opened - 7