=============================================================================== = Mesh-based Monte Carlo (MMC) = = Supporting both OpenCL and Multi-threading with SSE4 = =============================================================================== Author: Qianqian Fang <q.fang at neu.edu> License: GNU General Public License version 3 (GPL v3), see License.txt Version: 1.9 (v2019.10, Moon Cake - alpha) URL: http://mcx.space/mmc ------------------------------------------------------------------------------- Table of Content: O. What's New I. Introduction II. Downloading and Compiling MMC III. Running Simulations IV. Plotting the Results V. Known Issues and TODOs VI Getting Involved VII. Acknowledgement VIII.Reference --------------------------------------------------------------------- O. What's New MMC v2019.10 (1.9) is a major update to MMC. For the first time, MMC adds GPU support via the newly implemented OpenCL version. The released package simultaneously supports CPU-only multi-threading with SSE4 (standard MMC) and OpenCL-based MMC on a wide variety of CPU/GPU devices across vendors. Using up-to-date GPU hardware, the MMC simulation speed was increased by 100x to 400x compared to single-threaded SSE4-based MMC simulation. The detailed description of the GPU accelerated MMC can be found in the below in-press paper [Fang2019] and its preprint online. One can choose between the SSE4 and OpenCL based simulation modes using the -G or cfg.gpuid input options. A device ID of -1 enables SSE4 CPU based MMC, and a number 1 or above chooses the supported OpenCL device (using "mmc -L" or "mmclab('gpuinfo')" to list). A detailed (long) list of updates can be found in the ChangeLog.txt or the Github commit history: https://github.com/fangq/mmc/commits/master To highlight a few most important updates: * Supported GPU using OpenCL in both binary and mmclab * GPU MMC (or MMCL) had been rigirously validated across a range of benchmarks * Charactrized the speed improvement of MMCL simulations over standard MMC * Created "mmc" and "octave-mmclab" official Fedora packages and disseminate via Fedora repositories * Implemented xorshift128+ RNG unit and used as default for both CPU/GPU MMC * Fixed a list of bugs in both SSE4/OpenCL MMC * Created 6 standard benchmarks (B1:cube60, B1D:d-cube60, B2:sphshells, B2D:d-sphshells, B3:colin27, B4:skin-vessel) for comparisons Please file bug reports to https://github.com/fangq/mmc/issues Reference: '''[Fang2019]''' Qianqian Fang* and Shijie Yan, "GPU-accelerated mesh-based \ Monte Carlo photon transport simulations," J. of Biomedical Optics, in press, 2019. \ Preprint URL: https://www.biorxiv.org/content/10.1101/815977v1 ------------------------------------------------------------------------------- I. Introduction Mesh-based Monte Carlo (MMC) is a 3D Monte Carlo (MC) simulation software for photon transport in complex turbid media. MMC combines the strengths of the MC-based technique and the finite-element (FE) method: on the one hand, it can handle general media, including low-scattering ones, as in the MC method; on the other hand, it can use an FE-like tetrahedral mesh to represent curved boundaries and complex structures, making it even more accurate, flexible, and memory efficient. MMC uses the state-of-the-art ray-tracing techniques to simulate photon propagation in a mesh space. It has been extensively optimized for excellent computational efficiency and portability. MMC currently supports multi-threaded parallel computing via OpenMP, Single Instruction Multiple Data (SIMD) parallism via SSE and, starting from v2019.10, OpenCL to support a wide range of CPUs/GPUs from nearly all vendors. To run an MMC simulation, one has to prepare an FE mesh first to discretize the problem domain. Image-based 3D mesh generation has been a very challenging task only until recently. One can now use a powerful yet easy-to-use mesh generator, iso2mesh [1], to make tetrahedral meshes directly from volumetric medical images. You should download and install the latest iso2mesh toolbox in order to run the build-in examples in MMC. We are working on a massively-parallel version of MMC by porting this code to CUDA and OpenCL. This is expected to produce a hundred- or even thousand-fold acceleration in speed similar to what we have observed in our GPU-accelerated Monte Carlo software (Monte Carlo eXtreme, or MCX [2]). The most relevant publication describing this work is the GPU-accelerated MMC paper: Qianqian Fang and Shijie Yan, "GPU-accelerated mesh-based Monte Carlo photon transport simulations," J. of Biomedical Optics, in press, 2019. Preprint URL: https://www.biorxiv.org/content/10.1101/815977v1 Please keep in mind that MMC is only a partial implementation of the general Mesh-based Monte Carlo Method (MMCM). The limitations and issues you observed in the current software will likely be removed in the future version of the software. If you plan to perform comparison studies with other works, please communicate with the software author to make sure you have correctly understood the details of the implementation. The details of MMCM can be found in the following paper: Qianqian Fang, "Mesh-based Monte Carlo method using fast ray-tracing in Plücker coordinates," Biomed. Opt. Express 1, 165-175 (2010) URL: https://www.osapublishing.org/boe/abstract.cfm?uri=boe-1-1-165 While the original MMC paper was based on the Plücker coordinates, a number of more efficient SIMD-based ray-tracers, namely, Havel SSE4 ray-tracer, Badouel SSE ray-tracer and branchless-Badouel SSE ray-tracer (fastest) have been added since 2011. These methods can be selected by the -M flag. The details of these methods can be found in the below paper Qianqian Fang and David R. Kaeli, "Accelerating mesh-based Monte Carlo method on modern CPU architectures," Biomed. Opt. Express 3(12), 3223-3230 (2012) URL: https://www.osapublishing.org/boe/abstract.cfm?uri=boe-3-12-3223 and their key differences compared to another mesh-based MC simulator, TIM-OS, are discussed in Qianqian Fang, "Comment on 'A study on tetrahedron-based inhomogeneous Monte-Carlo optical simulation'," Biomed. Opt. Express, vol. 2(5) 1258-1264, 2011. URL: https://www.osapublishing.org/boe/abstract.cfm?uri=boe-2-5-1258 In addition, the generalized MMC algorithm for wide-field sources and detectors are described in the following paper, and was made possible with the collaboration with Ruoyang Yao and Prof. Xavier Intes from RPI Yao R, Intes X, Fang Q, "Generalized mesh-based Monte Carlo for wide-field illumination and detection via mesh retessellation," Biomed. Optics Express, 7(1), 171-184 (2016) URL: https://www.osapublishing.org/boe/abstract.cfm?uri=boe-7-1-171 In addition, we have been developing a fast approach to build the Jacobian matrix for solving inverse problems. The technique is called "photon replay", and is described in details in the below paper: Yao R, Intes X, Fang Q, "A direct approach to compute Jacobians for diffuse optical tomography using perturbation Monte Carlo-based photon 'replay'," Biomed. Optics Express, in press, (2018) In 2019, we published an improved MMC algorithm, named "dual-grid MMC", or DMMC, in the below JBO Letter. This method allows to use separate mesh for ray-tracing and fluence storage, and can be 2 to 3 fold faster than the original MMC without loss of accuracy. Shijie Yan, Anh Phong Tran, Qianqian Fang*, "A dual-grid mesh-based Monte Carlo algorithm for efficient photon1transport simulations in complex 3-D media," J. of Biomedical Optics, 24(2), 020503 (2019). The authors of the papers are greatly appreciated if you can cite the above papers as references if you use MMC and related software in your publication. ------------------------------------------------------------------------------- II. Download and Compile MMC The latest release of MMC can be downloaded from the following URL: http://mcx.space/#mmc The development branch (not fully tested) of the code can be accessed using Git. However this is not encouraged unless you are a developer. To check out the Git source code, you should use the following command: git clone https://github.com/fangq/mmc.git mmc To compile the software, you need to install GNU gcc compiler toolchain on your system. For Debian/Ubuntu based GNU/Linux systems, you can type sudo apt-get install gcc and for Fedora/Redhat based GNU/Linux systems, you can type su -c 'yum install gcc' To compile the binary with multi-threaded computing via OpenMP, your gcc version should be at least 4.0. To compile the binary supporting SSE4 instructions, gcc version should be at least 4.3.4. For windows users, you should install Cygwin64 [3]. During the installation, please select mingw64-x86_64-gcc and make packages. You should also install LibGW32C library [4] and copy the missing header files from GnuWin32\include\glibc to C:\cygwin64\usr\include when you compile the code (these files typically include ieee754.h, features.h, endian.h, bits/, gnu/, sys/cdefs.h, sys/ioctl.h and sys/ttydefaults.h). For Mac OS X users, you need to install the mp-gcc4.x series from MacPorts or Homebrew and use the instructions below to compile the MMC source code. To compile the program, you should first navigate into the mmc/src folder, and type make this will create a fully optimized OpenCL based mmc executable, located under the mmc/src/bin/ folder. Other compilation options include make ssemath # this uses SSE4 for both vector operations and math functions make omp # this compiles a multi-threaded binary using OpenMP make release # create a single-threaded optimized binary make prof # this makes a binary to produce profiling info for gprof make sse # this uses SSE4 for all vector operations (dot, cross), implies omp if you want to generate a portable binary that does not require external library files, you may use (only works for Linux and Windows with gcc) make EXTRALIB="-static -lm" # similar to "make", except the binary includes all libraries if you wish to build the mmc mex file to be used in matlab, you should run make mex # this produces mmc.mex* under mmc/mmclab/ folder similarly, if you wish to build the mex file for GNU Octave, you should run make oct # this produces mmc.mex* under mmc/mmclab/ folder If you append "-f makefile_sfmt" at the end of any of the above make commands, you will get an executable named "mmc_sfmt", which uses a fast MT19937 random-number-generator (RNG) instead of the default GLIBC 48bit RNG. If your CPU supports SSE4, the fastest binary can be obtained by running the following command: make ssemath -f makefile_sfmt You should be able to compile the code with an Intel C++ compiler, an AMD C compiler or LLVM compiler without any difficulty. To use other compilers, you simply append "CC=compiler_exe" to the above make commands. If you see any error messages, please google and fix your compiler settings or install the missing libraries. A special note for Mac OS users: you need to install mp-gcc4{4,5,6} from MacPorts in order to compile MMC. The default gcc (4.2) installed by Xcode 3.x does not support thread-local storage. Once downloaded and installed MacPorts from www.macports.org, you can install gcc by sudo port install mp-gcc44 Then add /opt/local/bin to your $PATH variable. A example compilation command for MMC looks like make ssemath CC=gcc-mp-4.4 After compilation, you may add the path to the "mmc" binary (typically, mmc/src/bin) to your search path. To do so, you should modify your $PATH environment variable. Detailed instructions can be found at [5]. You can also compile MMC using Intel's C++ compiler - icc. To do this, you run make CC=icc you must enable icc related environment variables by source the compilervars.sh file. The speed of icc-generated mmc binary is generally faster than those compiled by gcc. ------------------------------------------------------------------------------- III. Running Simulations 3.1 Preparation Before you create/run your own MMC simulations, we suggest you first understanding all the examples under the mmc/example directory, checking out the formats of the input files and the scripts for pre- and post-processing. Because MMC uses FE meshes in the simulation, you should create a mesh for your problem domain before launching any simulation. This can be done fairly straightforwardly using a Matlab/Octave mesh generator, iso2mesh [1], developed by the MMC author. In the mmc/matlab folder, we also provide additional functions to generate regular grid-shaped tetrahedral meshes. It is required to use the "savemmcmesh" function under the mmc/matlab folder to save the mesh output from iso2mesh, because it performs additional tests to ensure the consistency of element orientations. If you choose not to use savemmcmesh, you MUST call the "meshreorient" function in iso2mesh to test the "elem" array and make sure all elements are oriented in the same direction. Otherwise, MMC will give incorrect results. 3.2 Command line options The full command line options of MMC include the following: <pre> ############################################################################### # Mesh-based Monte Carlo (MMC) - OpenCL # # Copyright (c) 2010-2019 Qianqian Fang <q.fang at neu.edu> # # http://mcx.space/#mmc # # # #Computational Optics & Translational Imaging (COTI) Lab [http://fanglab.org]# # Department of Bioengineering, Northeastern University # # # # Research funded by NIH/NIGMS grant R01-GM114365 # ############################################################################### $Rev::57e5d6$2019.10$Date::Qianqian Fang $ by $Author::Qianqian Fang $ ############################################################################### usage: mmc <param1> <param2> ... where possible parameters include (the first item in [] is the default value) == Required option == -f config (--input) read an input file in .inp or .json format == MC options == -n [0.|float] (--photon) total photon number, max allowed value is 2^32-1 -b [0|1] (--reflect) 1 do reflection at int&ext boundaries, 0 no ref. -U [1|0] (--normalize) 1 to normalize the fluence to unitary,0 save raw -m [0|1] (--mc) 0 use MCX-styled MC method, 1 use MCML style MC -C [1|0] (--basisorder) 1 piece-wise-linear basis for fluence,0 constant -u [1.|float] (--unitinmm) define the mesh data length unit in mm -E [1648335518|int|mch](--seed) set random-number-generator seed; if an mch file is followed, MMC "replays" the detected photons; the replay mode can be used to calculate the mua/mus Jacobian matrices -P [0|int] (--replaydet) replay only the detected photons from a given detector (det ID starts from 1), use with -E -M [G|SG] (--method) choose ray-tracing algorithm (only use 1 letter) P - Plucker-coordinate ray-tracing algorithm H - Havel's SSE4 ray-tracing algorithm B - partial Badouel's method (used by TIM-OS) S - branch-less Badouel's method with SSE G - dual-grid MMC (DMMC) with voxel data output -e [1e-6|float](--minenergy) minimum energy level to trigger Russian roulette -V [0|1] (--specular) 1 source located in the background,0 inside mesh -k [1|0] (--voidtime) when src is outside, 1 enables timer inside void -A [0|int] (--autopilot) auto thread config:1 enable;0 disable -G [0|int] (--gpu) specify which GPU to use, list GPU by -L; 0 auto or -G '1101' (--gpu) using multiple devices (1 enable, 0 disable) -W '50,30,20' (--workload) workload for active devices; normalized by sum --atomic [1|0] 1 use atomic operations, 0 use non-atomic ones == Output options == -s sessionid (--session) a string used to tag all output file names -O [X|XFEJLP] (--outputtype) X - output flux, F - fluence, E - energy deposit J - Jacobian, L - weighted path length, P - weighted scattering count (J,L,P: replay mode) -d [0|1] (--savedet) 1 to save photon info at detectors,0 not to save -H [1000000] (--maxdetphoton) max number of detected photons -S [1|0] (--save2pt) 1 to save the fluence field, 0 do not save -x [0|1] (--saveexit) 1 to save photon exit positions and directions setting -x to 1 also implies setting '-d' to 1 -X [0|1] (--saveref) save diffuse reflectance/transmittance on the exterior surface. The output is stored in a file named *_dref.dat, and the 2nd column of the data is resized to [#Nf, #time_gate] where #Nf is the number of triangles on the surface; #time_gate is the number of total time gates. To plot the surface diffuse reflectance, the output triangle surface mesh can be extracted by faces=faceneighbors(cfg.elem,'rowmajor'); where 'faceneighbors' is part of Iso2Mesh. -q [0|1] (--saveseed) 1 save RNG seeds of detected photons for replay -F format (--outputformat)'ascii', 'bin' (in 'double'), 'mc2' (double) 'hdr' (Analyze) or 'nii' (nifti, double) == User IO options == -h (--help) print this message -v (--version) print MMC version information -l (--log) print messages to a log file instead -i (--interactive) interactive mode == Debug options == -D [0|int] (--debug) print debug information (you can use an integer or or a string by combining the following flags) -D [''|MCBWDIOXATRPE] 1 M photon movement info 2 C print ray-polygon testing details 4 B print Bary-centric coordinates 8 W print photon weight changes 16 D print distances 32 I entering a triangle 64 O exiting a triangle 128 X hitting an edge 256 A accumulating weights to the mesh 512 T timing information 1024 R debugging reflection 2048 P show progress bar 4096 E exit photon info combine multiple items by using a string, or add selected numbers together --debugphoton [-1|int] to print the debug info specified by -D only for a single photon, followed by its index (start 0) == Additional options == --momentum [0|1] 1 to save photon momentum transfer,0 not to save == Example == mmc -n 1000000 -f input.json -s test -b 0 -D TP </pre> 3.3 Input files The simplest example can be found under the "example/onecube" folder. Please run "createmesh.m" first from Matlab/Octave to create all the mesh files, which include elem_onecube.dat -- tetrahedral element file facenb_onecube.dat -- element neighbors of each face node_onecube.dat -- node coordinates prop_onecube.dat -- optical properties of each element type velem_onecube.dat -- volume of each element The input file of the example is named "onecube.inp", where we specify most of the simulation parameters. The input file follows a similar format as in MCX, which looks like the following 100 # total photon number (can be overwriten by -n) 17182818 # RNG seed, negative to regenerate 2. 8. 0. # source position (mm) 0. 0. 1. # initial incident vector 0.e+00 5.e-09 5e-10 # time-gates(s): start, end, step onecube # mesh id: name stub to all mesh files 3 # index of element (starting from 1) which encloses the source 3 1.0 # detector number and radius (mm) 2.0 6.0 0.0 # detector 1 position (mm) 2.0 4.0 0.0 # ... 2.0 2.0 0.0 pencil # optional: source type 0 0 0 0 # optional: source parameter set 1 0 0 0 0 # optional: source parameter set 2 The mesh files are linked through the "mesh id" (a name stub) with a format of {node|elem|facenb|velem}_meshid.dat. All mesh files must exist for an MMC simulation. If the index to the tetrahedron that encloses the source is not known, please use the "tsearchn" function in matlab/octave to find out and supply it in the 7th line in the input file. Examples are provided in mmc/examples/meshtest/createmesh.m. To run a simulation, you should execute the "run_test.sh" bash script in this folder. If you want to run mmc directly from the command line, you can do so by typing ../../src/bin/mmc -n 20 -f onecube.inp -s onecube where -n specifies the total photon number to be simulated, -f specifies the input file, and -s gives the output file name. To see all the supported options, run "mmc" without any parameters. The above command only simulates 20 photons and will complete instantly. An output file "onecube.dat" will be saved to record the normalized (unitary) flux at each node. If one specifies multiple time-windows from the input file, the output will contain multiple blocks with each block corresponding to the time-domain solution at all nodes computed for each time window. More sophisticated examples can be found under the example/validation and example/meshtest folders, where you can find "createmesh" scripts and post-processing script to make plots from the simulation results. 3.4 JSON-formatted input files Starting from version 0.9, MMC accepts a JSON-formatted input file in addition to the conventional tMCimg-like input format. JSON (JavaScript Object Notation) is a portable, human-readable and "fat-free" text format to represent complex and hierarchical data. Using the JSON format makes a input file self-explanatory, extensible and easy-to-interface with other applications (like MATLAB). A sample JSON input file can be found under the examples/onecube folder. The same file, onecube.json, is also shown below: { "Domain": { "MeshID": "onecube", "InitElem": 3 }, "Session": { "Photons": 100, "Seed": 17182818, "ID": "onecube" }, "Forward": { "T0": 0.0e+00, "T1": 5.0e-09, "Dt": 5.0e-10 }, "Optode": { "Source": { "Type": "pencil", "Pos": [2.0, 8.0, 0.0], "Dir": [0.0, 0.0, 1.0], "Param1": [0.0, 0.0, 0.0, 0.0], "Param2": [0.0, 0.0, 0.0, 0.0] }, "Detector": [ { "Pos": [2.0, 6.0, 0.0], "R": 1.0 }, { "Pos": [2.0, 4.0, 0.0], "R": 1.0 }, { "Pos": [2.0, 2.0, 0.0], "R": 1.0 } ] } } A JSON input file requires 4 root objects, namely "Domain", "Session", "Forward" and "Optode". Each object is a data structure providing information as indicated by its name. Each object can contain various sub-fields. The orders of the fields in the same level are flexible. For each field, you can always find the equivalent fields in the *.inp input files. For example, The "MeshID" field under the "Mesh" object is the same as Line#6 in onecube.inp; the "InitElem" under "Mesh" is the same as Line#7; the "Forward.T0" is the same as the first number in Line#5, etc. An MMC JSON input file must be a valid JSON text file. You can validate your input file by running a JSON validator, for example http://jsonlint.com/ You should always use "..." to quote a "name" and separate parallel items by ",". MMC accepts an alternative form of JSON input, but using it is not recommended. In the alternative format, you can use "rootobj_name.field_name": value to represent any parameter directly in the root level. For example { "Domain.MeshID": "onecube", "Session.ID": "onecube", ... } You can even mix the alternative format with the standard format. If any input parameter has values in both formats in a single input file, the standard-formatted value has higher priority. To invoke the JSON-formatted input file in your simulations, you can use the "-f" command line option with MMC, just like using an .inp file. For example: ../../src/bin/mmc -n 20 -f onecube.json -s onecubejson -D M The input file must have a ".json" suffix in order for MMC to recognize. If the input information is set in both command line, and input file, the command line value has higher priority (this is the same for .inp input files). For example, when using "-n 20", the value set in "Session"/"Photons" is overwritten to 20; when using "-s onecubejson", the "Session"/"ID" value is modified. If your JSON input file is invalid, MMC will quit and point out where it expects you to double check. 3.5 Photon debugging information using -D flag the output format for -D M (photon moving) is below: ? px py pz eid id scat ? is a single letter representing the state of the current position: B a boundary point P the photon is passing an interface point T the photon terminates at this location due to exceeding end of the time window M a position other than any of the above px,py,pz: the current photon position eid: the index (starting from 1) of the current enclosing element id: the index of the current photon, from 1 to nphoton scat: the "normalized" length to read the next scattering site, \ it is unitless for -D A (flux accumulation debugging), the output is A ax ay az ww eid dlen ax ay az: the location where the accumulation calculation was done \ (typically, the half-way point of the line segment between the last \ and current positions) ww: the photon weight loss for the line segment dlen=scat/mus of the current element: the distance left to arrive \ the next scattering site for -D E E px py pz vx vy vz w eid vx vy vz: the unitary propagation vector when the photon exits w: the current photon weight ------------------------------------------------------------------------------- IV. Plotting the Results As described above, MMC produces a fluence-rate output file as "session-id".dat. By default, this file contains the normalized, i.e. under unitary source, fluence at each node of the mesh. The detailed interpretation of the output data can be found in [6]. If multiple time-windows are defined, the output file will contain multiple blocks of data, with each block being the fluence distribution at each node at the center point of each time-window. The total number of blocks equals to the total time-gate number. To read the mesh files (tetrahedral elements and nodes) into matlab, one can use readmmcnode and readmmcelem function under the mmc/matlab directory. Plotting non-structural meshes in matlab is possible with interpolation functions such as griddata3. However, it is very time-consuming for large meshes. In iso2mesh, a fast mesh slicing & plotting function, qmeshcut, is very efficient in making 3D plots of mesh or cross-sections. More details can be found at this webpage [7], or "help qmeshcut" in matlab. Another useful function is plotmesh in iso2mesh toolbox. It has very flexible syntax to allow users to plot surfaces, volumetric meshes and cross-section plots. One can use something like plotmesh([node fluence],elem,'x<30 & y>30'); to plot a sliced mesh, or plotmesh([node log10(fluence)],elem,'x=30'); view(3) to show a cross-sectional plot. Please edit or browse the *.m files under all example subfolder to find more options to make plot from MMC output. When users specify "-d 1" to record partial path lengths for all detected photons, an output file named "sessionid".mch will be saved under the same folder. This file can be loaded into Matlab/Octave using the "loadmch.m" script under the mmc/matlab folder. The output of loadmch script has the following columns: detector-id, scattering-events, partial-length_1, partial-length_2, ...., additional data ... The simulation settings will be returned by a structure. Using the information from the mch file will allow you to re-scale the detector readings without rerunning the simulation (for absorption changes only). ------------------------------------------------------------------------------- V. Known issues and TODOs * MMC only supports linear tetrahedral elements at this point. Quadratic \ elements will be added later * Currently, this code only supports element-based optical properties; \ nodal-based optical properties (for continuously varying media) will be \ added in a future release ------------------------------------------------------------------------------- VI. Getting Involved MMC is an open-source software. It is released under the terms of GNU General Public License version 3 (GPLv3). That means not only everyone can download and use MMC for any purposes, but also you can modify the code and share the improved software with others (as long as the derived work is also licensed under the GPLv3 license). If you already made a change to the source code to fix a bug you encountered in your research, we are appreciated if you can share your changes (as "git diff" outputs) with the developers. We will patch the code as soon as we fully test the changes (we will acknowledge your contribution in the MMC documentation). When making edits to the source code with an intent of sharing with the upstream authors, please set your editor's tab width to 8 so that the indentation of the source is correctly displayed. Please keep your patch as small and local as possible, so that other parts of the code are not influenced. To streamline the process process, the best way to contribute your patch is to click the "fork" button from http://github.com/fangq/mmc, and then change the code in your forked repository. Once fully tested and documented, you can then create a "pull request" so that the upstream author can review the changes and accept your change. In you are a user, please use our mmc-users mailing list to post questions or share experience regarding MMC. The mailing lists can be found from this link: http://mcx.space/#about ------------------------------------------------------------------------------- VII. Acknowledgement MMC uses the following open-source libraries: === SSE Math library by Julien Pommier === Copyright (C) 2007 Julien Pommier This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. 3. This notice may not be removed or altered from any source distribution. (this is the zlib license) === cJSON library by Dave Gamble === Copyright (c) 2009 Dave Gamble Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. === SFMT library by Mutsuo Saito, Makoto Matsumoto and Hiroshima University === Copyright (c) 2006,2007 Mutsuo Saito, Makoto Matsumoto and Hiroshima University. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of the Hiroshima University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. === drand48_r port for libgw32c by Free Software Foundation === Copyright (C) 1995, 1997, 2001 Free Software Foundation, Inc. This file is part of the GNU C Library. Contributed by Ulrich Drepper <drepper@gnu.ai.mit.edu>, August 1995. The GNU C Library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. The GNU C Library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with the GNU C Library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. === git-rcs-keywords by Martin Turon (turon) at Github === MMC includes a pair of git filters (.git_filters/rcs-keywords.clean and .git_filters/rcs-keywords.smudge) to automatically update SVN keywords in mcx_utils.c. The two simple filter scripts were licensed under the BSD license according to this link: turon/git-rcs-keywords#4 Both filter files were significantly modified by Qianqian Fang. ------------------------------------------------------------------------------- VIII. Reference [1] http://iso2mesh.sf.net -- an image-based surface/volumetric mesh generator [2] http://mcx.sf.net -- Monte Carlo eXtreme: a GPU-accelerated MC code [3] https://cygwin.com/setup-x86_64.exe [4] http://developer.apple.com/mac/library/releasenotes/DeveloperTools/RN-llvm-gcc/index.html [5] http://iso2mesh.sourceforge.net/cgi-bin/index.cgi?Doc/AddPath [6] http://mcx.sf.net/cgi-bin/index.cgi?MMC/Doc/FAQ#How_do_I_interpret_MMC_s_output_data [7] http://iso2mesh.sourceforge.net/cgi-bin/index.cgi?fun/qmeshcut