NMEA Plus is a Ruby gem for parsing and decoding "GPS" messages: NMEA, AIS, and any other similar formats of short messaging typically used by marine equipment. It provides convenient access (by name) to the fields of each message type, and a stream reader designed for use with Ruby Blocks.
gem install nmea_plus
In its most basic use, you can decode messages as follows:
require 'nmea_plus'
decoder = NMEAPlus::Decoder.new
message = decoder.parse("$GPGLL,4916.45,N,12311.12,W,225444,A*00")
# message data -- specific to this message type
puts message.latitude # prints 49.27416666666666666666
puts message.longitude # prints -123.18533333333333333
puts message.fix_time # prints <today's date> 22:54:44 <your local time zone offset>
puts message.valid? # prints true
puts message.faa_mode # prints nil
# metadata
puts message.checksum_ok? # prints false -- because this checksum is made up
puts message.original # prints "$GPGLL,4916.45,N,12311.12,W,225444,A*00"
puts message.data_type # prints "GPGLL" -- what was specified in the message
puts message.interpreted_data_type # prints "GLL" -- the actual container used
# metadata that applies to multipart messages (also works for single messages)
puts message.all_messages_received? # prints true
puts message.all_checksums_ok? # prints false -- checksum is still made up
# safer way to do what we did above
if "GPGLL" == message.data_type # Alternately, if "GLL" == message.interpreted_data_type
puts message.latitude # prints 49.27416666666666666666
puts message.longitude # prints -123.18533333333333333
puts message.fix_time # prints <today's date> 22:54:44 <your local time zone offset>
puts message.valid? # prints true
puts message.faa_mode # prints nil
end
Of course, decoding in practice is more complex than that. Some messages can have multiple parts, and AIS messages have their own complicated payload. NMEAPlus provides a SourceDecoder
class that operates on IO
objects (anything with each_line
support) -- a File
, SerialPort
, etc. You can iterate over each message (literally each_message
), or receive only fully assembled multipart messages by iterating over each_complete_message
.
require 'nmea_plus'
input1 = "!AIVDM,2,1,0,A,58wt8Ui`g??r21`7S=:22058<v05Htp000000015>8OA;0sk,0*7B"
input2 = "!AIVDM,2,2,0,A,eQ8823mDm3kP00000000000,2*5D"
io_source = StringIO.new("#{input1}\n#{input2}") # source decoder works on any IO object
source_decoder = NMEAPlus::SourceDecoder.new(io_source)
source_decoder.each_complete_message do |message|
puts message.all_checksums_ok? # prints true -- the full message set has good checksums
puts message.all_messages_received? # prints true -- taken care of by each_complete_message
if "AIVDM" == message.data_type
puts message.ais.message_type # prints 5
puts message.ais.repeat_indicator # prints 0
puts message.ais.source_mmsi # prints 603916439
puts message.ais.ais_version # prints 0
puts message.ais.imo_number # prints 439303422
puts message.ais.callsign.strip # prints "ZA83R"
puts message.ais.name.strip # prints "ARCO AVON"
puts message.ais.ship_cargo_type # prints 69
puts message.ais.ship_cargo_type_description # prints "Passenger, No additional information"
puts message.ais.ship_dimension_to_bow # prints 113
puts message.ais.ship_dimension_to_stern # prints 31
puts message.ais.ship_dimension_to_port # prints 17
puts message.ais.ship_dimension_to_starboard # prints 11
puts message.ais.epfd_type # prints 0
puts message.ais.eta # prints <this year>-03-23 19:45:00 <your local time zone offset>
puts message.ais.static_draught # prints 13.2
puts message.ais.destination.strip # prints "HOUSTON"
puts message.ais.dte? # prints false
end
end
This gem was coded to accept the standard NMEA messages defined in the official and unoffical specs found here:
- http://www.catb.org/gpsd/NMEA.txt
- http://www.nmea.org/Assets/100108_nmea_0183_sentences_not_recommended_for_new_designs.pdf
Because the message types are standard, if no override is found for a particular talker ID then the message will parse according to the command (the last 3 characters) of the data type. In other words, $GPGLL
will use the general GLL
message type. Currently, the following standard message types are supported:
AAM, ALM, APA, APB, BEC, BER, BOD, BPI, BWC, BWR, BWW, DBK, DBS, DBT, DCN, DPT, DRU, DTM, FSI, GBS, GDA, GDF, GDP, GGA, GLA, GLC, GLF, GLL, GLP, GOA, GOF, GOP, GNS, GRS, GSA, GST, GSV, GTD, GXA, GXF, GXP, HCC, HCD, HDG, HDM, HDT, HFB, HSC, HTC, HVD, HVM, IMA, ITS, LCD, MDA, MHU, MMB, MSK, MSS, MTA, MTW, MWH, MWS, MWV, OLN, OLW, OMP, ONZ, OSD, Rnn (R00, R01, ...), RMA, RMB, RMC, RNN, ROT, RPM, RSA, RSD, RTE, SBK, SCD, SCY, SDB, SFI, SGD, SGR, SIU, SLC, SNC, SNU, SPS, SSF, STC, STN, STR, SYS TDS, TEC, TEP, TFI, TGA, TIF, TPC, TPR, TPT, TRF, TRP, TRS, TTM, VBW, VCD, VDR, VHW, VLW, VPE, VPW, VTA, VTG, VTI, VWE, VWR, VWT WCV, WDC, WDR, WFM, WNC, WNR, WPL, XDR, XTE, XTR, YWP, YWS, ZCD, ZDA, ZEV, ZFI, ZFO, ZLZ, ZPI, ZTA, ZTE, ZTG, ZTI, ZWP, ZZU
Support for proprietary NMEA messages is also possible. PASHR is included as proof-of-concept.
AIS message type definitions were implemented from the unofficial spec found here: http://catb.org/gpsd/AIVDM.html
And some binary subtypes from the ITU spec found here: https://www.itu.int/dms_pubrec/itu-r/rec/m/R-REC-M.1371-4-201004-S!!PDF-E.pdf
The AIS payload can be found in the payload field of a VDM
message (aka !AIVDM
, !ABVDM
, !SAVDM
) or VDO
message (aka !AIVDO
). Currently, the following AIS message types are supported:
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 18, 19, 20, 21, 24, 27
Type 6 subtypes for DAC/FID: 1/0, 1/2, 1/3, 1/4, 1/5, 235/10, 1022/61
Type 8 subtypes for DAC/FID: 1/0, 1/22, 1/31, 200/10, 366/56, 366/57
This module was written primarily from information scraped together on the web, with minimal testing on an actual device (an SR161 AIS receiver). A lack of test cases -- especially for more obscure message types -- is a barrier to completeness. Please don't entrust your life or the safety of a ship to this code without doing your own rigorous testing.
This gem was written by Ian Katz (ianfixes@gmail.com) in 2015. It's released under the Apache 2.0 license.