Kafka Connect sink connector for IBM MQ

kafka-connect-mq-sink is a Kafka Connect sink connector for copying data from Apache Kafka into IBM MQ.

The connector is supplied as source code which you can easily build into a JAR file.

Note: A source connector for IBM MQ is also available on GitHub.

Building the connector
Running the connector
Running the connector with Docker
Deploying the connector to Kubernetes
Data formats
Security
Configuration
Exactly-once message delivery semantics
Troubleshooting
Support
Issues and contributions
License

Building the connector

To build the connector, you must have the following installed:

git
Maven 3.0 or later
Java 8 or later

Clone the repository with the following command:

git clone https://github.com/ibm-messaging/kafka-connect-mq-sink.git

Change directory into the kafka-connect-mq-sink directory:

cd kafka-connect-mq-sink

Run the unit tests:

mvn test

Run the integration tests (requires Docker):

mvn integration-test

Build the connector using Maven:

mvn clean package

Once built, the output is a single JAR target/kafka-connect-mq-sink-<version>-jar-with-dependencies.jar which contains all of the required dependencies.

NOTE: With the 2.0.0 release the base Kafka Connect library has been updated from 2.6.0 to 3.4.1.

Running the connector

For step-by-step instructions, see the following guides for running the connector:

connecting to Apache Kafka running locally
connecting to an installation of IBM Event Streams

To run the connector, you must have:

The JAR from building the connector
A properties file containing the configuration for the connector
Apache Kafka 2.0.0 or later, either standalone or included as part of an offering such as IBM Event Streams.
IBM MQ v9 or later, or the IBM MQ on Cloud service

The connector can be run in a Kafka Connect worker in either standalone (single process) or distributed mode. It's a good idea to start in standalone mode.

Running in standalone mode

You need two configuration files, one for the configuration that applies to all of the connectors such as the Kafka bootstrap servers, and another for the configuration specific to the MQ sink connector such as the connection information for your queue manager. For the former, the Kafka distribution includes a file called connect-standalone.properties that you can use as a starting point. For the latter, you can use config/mq-sink.properties in this repository.

The connector connects to MQ using either a client or a bindings connection. For a client connection, you must provide the name of the queue manager, the connection name (one or more host/port pairs) and the channel name. In addition, you can provide a user name and password if the queue manager is configured to require them for client connections. If you look at the supplied config/mq-sink.properties, you'll see how to specify the configuration required. For a bindings connection, you must provide the name of the queue manager and also run the Kafka Connect worker on the same system as the queue manager.

To run the connector in standalone mode from the directory into which you installed Apache Kafka, you use a command like this:

bin/connect-standalone.sh connect-standalone.properties mq-sink.properties

Running in distributed mode

You need an instance of Kafka Connect running in distributed mode. The Kafka distribution includes a file called connect-distributed.properties that you can use as a starting point, or follow Running with Docker or Deploying to Kubernetes.

To start the MQ connector, you can use config/mq-sink.json in this repository after replacing all placeholders and use a command like this:

curl -X POST -H "Content-Type: application/json" http://localhost:8083/connectors \
  --data "@./config/mq-sink.json"

Running with Docker

This repository includes an example Dockerfile to run Kafka Connect in distributed mode. It also adds in the MQ sink connector as an available connector plugin. It uses the default connect-distributed.properties and connect-log4j.properties files.

Before running the Docker commands, make sure to replace <TAG> with the desired tag value (e.g., v2.0.0, latest, etc.) for the Docker image.

To run the Kafka Connect with MQ sink connector using Docker, follow these steps:

mvn clean package
docker build -t kafkaconnect-with-mq-sink:<TAG> .
docker run -p 8083:8083 kafkaconnect-with-mq-sink:<TAG>

NOTE: To provide custom properties files create a folder called config containing the connect-distributed.properties and connect-log4j.properties files and use a Docker volume to make them available when running the container like this:

docker run -v $(pwd)/config:/opt/kafka/config -p 8083:8083 kafkaconnect-with-mq-sink:<TAG>

To start the MQ connector, you can use config/mq-sink.json in this repository after replacing all placeholders and use a command like this:

curl -X POST -H "Content-Type: application/json" http://localhost:8083/connectors \
  --data "@./config/mq-sink.json"

Deploying to Kubernetes

This repository includes a Kubernetes yaml file called kafka-connect.yaml. This will create a deployment to run Kafka Connect in distributed mode and a service to access the deployment.

The deployment assumes the existence of a Secret called connect-distributed-config and a ConfigMap called connect-log4j-config. These can be created using the default files in your Kafka install, however it is easier to edit them later if comments and whitespaces are trimmed before creation.

Creating Kafka Connect configuration Secret and ConfigMap

Create Secret for Kafka Connect configuration:

cp kafka/config/connect-distributed.properties connect-distributed.properties.orig
sed '/^#/d;/^[[:space:]]*$/d' < connect-distributed.properties.orig > connect-distributed.properties
kubectl -n <namespace> create secret generic connect-distributed-config --from-file=connect-distributed.properties

Create ConfigMap for Kafka Connect Log4j configuration:

cp kafka/config/connect-log4j.properties connect-log4j.properties.orig
sed '/^#/d;/^[[:space:]]*$/d' < connect-log4j.properties.orig > connect-log4j.properties
kubectl -n <namespace> create configmap connect-log4j-config --from-file=connect-log4j.properties

Creating Kafka Connect deployment and service in Kubernetes

NOTE: You will need to build the Docker image and push it to your Kubernetes image repository. Remember that the supplied Dockerfile is just an example and you will have to modify it for your needs. You might need to update the image name in the kafka-connect.yaml file.

Update the namespace in kafka-connect.yaml
kubectl -n <namespace> apply -f kafka-connect.yaml
curl <serviceIP>:<servicePort>/connector-plugins to see whether the MQ sink connector is available to use

Deploying to OpenShift using Strimzi

This repository includes a Kubernetes yaml file called strimzi.kafkaconnector.yaml for use with the Strimzi operator. Strimzi provides a simplified way of running the Kafka Connect distributed worker, by defining either a KafkaConnect resource or a KafkaConnectS2I resource.

The KafkaConnectS2I resource provides a nice way to have OpenShift do all the work of building the Docker images for you. This works particularly nicely combined with the KafkaConnector resource that represents an individual connector.

The following instructions assume you are running on OpenShift and have Strimzi 0.16 or later installed.

Start a Kafka Connect cluster using KafkaConnectS2I

Create a file called kafka-connect-s2i.yaml containing the definition of a KafkaConnectS2I resource. You can use the examples in the Strimzi project to get started.
Configure it with the information it needs to connect to your Kafka cluster. You must include the annotation strimzi.io/use-connector-resources: "true" to configure it to use KafkaConnector resources so you can avoid needing to call the Kafka Connect REST API directly.
oc apply -f kafka-connect-s2i.yaml to create the cluster, which usually takes several minutes.

Add the MQ sink connector to the cluster

mvn clean package to build the connector JAR.
mkdir my-plugins
cp target/kafka-connect-mq-sink-*-jar-with-dependencies.jar my-plugins
oc start-build <kafkaconnectClusterName>-connect --from-dir ./my-plugins to add the MQ sink connector to the Kafka Connect distributed worker cluster. Wait for the build to complete, which usually takes a few minutes.
oc describe kafkaconnects2i <kafkaConnectClusterName> to check that the MQ sink connector is in the list of available connector plugins.

Start an instance of the MQ sink connector using KafkaConnector

cp deploy/strimzi.kafkaconnector.yaml kafkaconnector.yaml
Update the kafkaconnector.yaml file to replace all of the values in <>, adding any additional configuration properties.
oc apply -f kafkaconnector.yaml to start the connector.
oc get kafkaconnector to list the connectors. You can use oc describe to get more details on the connector, such as its status.

Data formats

Kafka Connect is very flexible but it's important to understand the way that it processes messages to end up with a reliable system. When the connector encounters a message that it cannot process, it stops rather than throwing the message away. Therefore, you need to make sure that the configuration you use can handle the messages the connector will process.

Each message in Kafka Connect is associated with a representation of the message format known as a schema. Each Kafka message actually has two parts, key and value, and each part has its own schema. The MQ sink connector does not currently use message keys, but some of the configuration options use the word Value because they refer to the Kafka message value.

When the MQ sink connector reads a message from Kafka, it is processed using a converter which chooses a schema to represent the message format and creates a Java object containing the message value. The MQ sink connector then converts this internal format into the message it sends to MQ using a message builder.

There are three converters built into Apache Kafka. The following table shows which converters to use based on the incoming message encoding.

Incoming Kafka message	Converter class
Any	org.apache.kafka.connect.converters.ByteArrayConverter
String	org.apache.kafka.connect.storage.StringConverter
JSON, may have schema	org.apache.kafka.connect.json.JsonConverter

There are three message builders supplied with the connector, although you can write your own. The basic rule is that if you're using a converter that uses a very simple schema, the default message builder is probably the best choice. If you're using a converter that uses richer schemas to represent complex messages, the JSON message builder is good for generating a JSON representation of the complex data. The following table shows some likely combinations.

Converter class	Message builder class	Outgoing MQ message
org.apache.kafka.connect.converters.ByteArrayConverter	com.ibm.eventstreams.connect.mqsink.builders.DefaultMessageBuilder	Binary data
org.apache.kafka.connect.storage.StringConverter	com.ibm.eventstreams.connect.mqsink.builders.DefaultMessageBuilder	String data
org.apache.kafka.connect.json.JsonConverter	com.ibm.eventstreams.connect.mqsink.builders.JsonMessageBuilder	JSON, no schema

When you set mq.message.body.jms=true, the MQ messages are generated as JMS messages. This is appropriate if the applications receiving the messages are themselves using JMS.

There's no single configuration that will always be right, but here are some high-level suggestions.

Message values are treated as byte arrays, pass byte array into MQ message

value.converter=org.apache.kafka.connect.converters.ByteArrayConverter

Message values are treated as strings, pass string into MQ message

value.converter=org.apache.kafka.connect.storage.StringConverter

The gory detail

The messages received from Kafka are processed by a converter which chooses a schema to represent the message and creates a Java object containing the message value. There are three basic converters built into Apache Kafka.

Converter class	Kafka message encoding	Value schema	Value class
org.apache.kafka.connect.converters.ByteArrayConverter	Any	OPTIONAL_BYTES	byte[]
org.apache.kafka.connect.storage.StringConverter	String	OPTIONAL_STRING	java.lang.String
org.apache.kafka.connect.json.JsonConverter	JSON, may have schema	Depends on message	Depends on message

The MQ sink connector uses a message builder to build the MQ messsages from the schema and value. There are three built-in message builders.

The DefaultMessageBuilder is best when the schema is very simple, such as when the ByteArrayConverter or StringConverter are being used.

Value schema	Value class	Outgoing message format	JMS message type	Outgoing message body
null	Any	MQFMT_STRING	TextMessage	Java Object.toString() of value
BYTES	byte[]	MQFMT_NONE	BytesMessage	Byte array
STRING	java.lang.String	MQFMT_STRING	TextMessage	String
Everything else	Any	MQFMT_STRING	TextMessage	Java Object.toString() of value

If you use the JsonConverter with the DefaultMessageBuilder, the output message will not be JSON; it will be a Java string representation of the value instead. That's why there's a JsonMessageBuilder too which behaves like this:

Value schema	Value class	Outgoing message format	JMS message type	Outgoing message body
Any	Any	MQFMT_STRING	TextMessage	JSON representation of the value

To make the differences clear, here are some examples.

Input message	Converter	Value schema	Message builder	Output message body	Comment
ABC	StringConverter	STRING	DefaultMessageBuilder	ABC	OK
ABC	StringConverter	STRING	JsonMessageBuilder	"ABC"	Quotes added to give a JSON string
"ABC"	JsonConverter	STRING	DefaultMessageBuilder	ABC	Quotes removed, not a JSON string
"ABC"	JsonConverter	STRING	JsonMessageBuilder	"ABC"	OK
{"A":"B"}	JsonConverter	Compound (STRUCT)	DefaultMessageBuilder	STRUCT{A=B}	Probably not helpful
{"A":"B"}	JsonConverter	Compound (STRUCT)	JsonMessageBuilder	{"A":"B"}	OK

Note that the order of JSON structures is not fixed and fields may be reordered.

To handle the situation in which you already have a Kafka converter that you want to use to build the MQ message payload, the ConverterMessageBuilder is the one to use. Then you would end up using two Converters - one to convert the Kafka message to the internal SinkRecord, and the second to convert that into the MQ message. Since the Converter might also have its own configuration options, you can specify them using a prefix of mq.message.builder.value.converter. For example, the following configuration gets the ConverterMessageBuilder to work the same as the JsonMessageBuilder.

mq.message.builder=com.ibm.eventstreams.connect.mqsink.builders.ConverterMessageBuilder
mq.message.builder.value.converter=org.apache.kafka.connect.json.JsonConverter
mq.message.builder.value.converter.schemas.enable=false

Key support and partitioning

By default, the connector does not use the keys for the Kafka messages it reads. It can be configured to set the JMS correlation ID using the key of the Kafka records. To configure this behavior, set the mq.message.builder.key.header configuration value.

mq.message.builder.key.header	Key schema	Key class	Recommended value for key.converter
JMSCorrelationID	STRING	String	org.apache.kafka.connect.storage.StringConverter
JMSCorrelationID	BYTES	byte[]	org.apache.kafka.connect.converters.ByteArrayConverter

In MQ, the correlation ID is a 24-byte array. As a string, the connector represents it using a sequence of 48 hexadecimal characters. The Kafka key will be truncated to fit into this size.

The connector can be configured to set the Kafka topic, partition and offset as JMS message properties using the mq.message.builder.*.property configuration values. If configured, the topic is set as a string property, the partition as an integer property and the offset as a long property. Because these values are set using JMS message properties, they only have an effect if mq.message.body.jms=true is set.

Security

The connector supports authentication with user name and password and also connections secured with TLS using a server-side certificate and mutual authentication with client-side certificates. You can also choose whether to use connection security parameters (MQCSP) depending on the security settings you're using in MQ.

Setting up TLS using a server-side certificate

To enable use of TLS, set the configuration mq.ssl.cipher.suite to the name of the cipher suite which matches the CipherSpec in the SSLCIPH attribute of the MQ server-connection channel. Use the table of supported cipher suites for MQ 9.1 here as a reference. Note that the names of the CipherSpecs as used in the MQ configuration are not necessarily the same as the cipher suite names that the connector uses. The connector uses the JMS interface so it follows the Java conventions.

You will need to put the public part of the queue manager's certificate in the JSSE truststore used by the Kafka Connect worker that you're using to run the connector. If you need to specify extra arguments to the worker's JVM, you can use the EXTRA_ARGS environment variable.

Setting up TLS for mutual authentication

You will need to put the public part of the client's certificate in the queue manager's key repository. You will also need to configure the worker's JVM with the location and password for the keystore containing the client's certificate. Alternatively, you can configure a separate keystore and truststore for the connector.

Troubleshooting

For troubleshooting, or to better understand the handshake performed by the IBM MQ Java client application in combination with your specific JSSE provider, you can enable debugging by setting javax.net.debug=ssl in the JVM environment.

Configuration

The configuration options for the Kafka Connect sink connector for IBM MQ are as follows:

Name	Description	Type	Default	Valid values
topics or topics.regex	List of Kafka source topics	string		topic1[,topic2,...]
mq.queue.manager	The name of the MQ queue manager	string		MQ queue manager name
mq.connection.mode	The connection mode - bindings or client	string	client	client, bindings
mq.connection.name.list	List of connection names for queue manager	string		host(port)[,host(port),...]
mq.channel.name	The name of the server-connection channel	string		MQ channel name
mq.queue	The name of the target MQ queue	string		MQ queue name
mq.exactly.once.state.queue	The name of the MQ queue used to store state when running with exactly-once semantics	string		MQ state queue name
mq.user.name	The user name for authenticating with the queue manager	string		User name
mq.password	The password for authenticating with the queue manager	string		Password
mq.user.authentication.mqcsp	Whether to use MQ connection security parameters (MQCSP)	boolean	true
mq.ccdt.url	The URL for the CCDT file containing MQ connection details	string		URL for obtaining a CCDT file
mq.message.builder	The class used to build the MQ message	string		Class implementing MessageBuilder
mq.message.body.jms	Whether to generate the message body as a JMS message type	boolean	false
mq.time.to.live	Time-to-live in milliseconds for messages sent to MQ	long	0 (unlimited)	[0,...]
mq.persistent	Send persistent or non-persistent messages to MQ	boolean	true
mq.ssl.cipher.suite	The name of the cipher suite for TLS (SSL) connection	string		Blank or valid cipher suite
mq.ssl.peer.name	The distinguished name pattern of the TLS (SSL) peer	string		Blank or DN pattern
mq.ssl.keystore.location	The path to the JKS keystore to use for SSL (TLS) connections	string	JVM keystore	Local path to a JKS file
mq.ssl.keystore.password	The password of the JKS keystore to use for SSL (TLS) connections	string
mq.ssl.truststore.location	The path to the JKS truststore to use for SSL (TLS) connections	string	JVM truststore	Local path to a JKS file
mq.ssl.truststore.password	The password of the JKS truststore to use for SSL (TLS) connections	string
mq.ssl.use.ibm.cipher.mappings	Whether to set system property to control use of IBM cipher mappings	boolean
mq.message.builder.key.header	The JMS message header to set from the Kafka record key	string		JMSCorrelationID
mq.kafka.headers.copy.to.jms.properties	Whether to copy Kafka headers to JMS message properties	boolean	false
mq.message.builder.value.converter	The class and prefix for message builder's value converter	string		Class implementing Converter
mq.message.builder.topic.property	The JMS message property to set from the Kafka topic	string		Blank or valid JMS property name
mq.message.builder.partition.property	The JMS message property to set from the Kafka partition	string		Blank or valid JMS property name
mq.message.builder.offset.property	The JMS message property to set from the Kafka offset	string		Blank or valid JMS property name
mq.reply.queue	The name of the reply-to queue	string		MQ queue name or queue URI
mq.retry.backoff.ms	Wait time, in milliseconds, before retrying after retriable exceptions	long	60000	[0,...]
mq.message.mqmd.write	Whether to enable a custom message builder to write MQ message descriptors	boolean	false
mq.message.mqmd.context	Message context to set on the destination queue. This is required when setting some message descriptors.	string		`IDENTITY`, `ALL`

Using a CCDT file

Some of the connection details for MQ can be provided in a CCDT file by setting mq.ccdt.url in the MQ sink connector configuration file. If using a CCDT file the mq.connection.name.list and mq.channel.name configuration options are not required.

Externalizing secrets

KIP 297 introduced a mechanism to externalize secrets to be used as configuration for Kafka connectors.

Example: externalizing secrets with FileConfigProvider

Given a file mq-secrets.properties with the contents:

secret-key=password

Update the worker configuration file to specify the FileConfigProvider which is included by default:

# Additional properties for the worker configuration to enable use of ConfigProviders
# multiple comma-separated provider types can be specified here
config.providers=file
config.providers.file.class=org.apache.kafka.common.config.provider.FileConfigProvider

Update the connector configuration file to reference secret-key in the file:

mq.password=${file:mq-secret.properties:secret-key}

Using FileConfigProvider in Kubernetes

To use a file for the mq.password in Kubernetes, you create a Secret using the file as described in the Kubernetes docs.

Exactly-once message delivery semantics

The MQ sink connector provides at-least-once message delivery by default. This means that each MQ message will be delivered to Kafka, but in failure scenarios it is possible to have duplicated messages delivered to Kafka.

Version 2.0.0 of the MQ sink connector introduced exactly-once message delivery semantics. An additional MQ queue is used to store the state of message deliveries. When exactly-once delivery is enabled MQ messages are delivered to Kafka with no duplicated messages.

Exactly-once delivery Kafka Connect worker configuration

To enable exactly-once delivery, the MQ sink connector must be run on Kafka Connect version 2.0.0 or later.

Note: Exactly-once support for sink connectors is only available in distributed mode; distributed Connect workers cannot provide exactly-once delivery semantics. Kafka Connect is in distributed mode when running the connector with Docker and when deploying the connector to Kubernetes.

Exactly-once delivery MQ sink connector configuration

To enable exactly-once delivery, the MQ sink connector must be configured the mq.exactly.once.state.queue property set to the name of a pre-configured MQ queue on the same queue manager as the sink MQ queue.

Exactly-once delivery requires that only a single connector task can run in the Kafka Connect instance, hence the tasks.max property must be set to 1 to ensure that failure scenarios do not cause duplicated messages to be delivered.

To achieve exactly-once delivery with the MQ sink connector, it is essential to configure its consumer group to ignore records in aborted transactions. You can find detailed instructions in the Kafka documentation. Notably, this configuration does not have any additional ACL (Access Control List) requirements.

To start the MQ sink connector with exactly-once delivery, the config/mq-sink-exactly-once.json file in this repository can be used as a connector configuration template.

Note: Exactly-once delivery requires a clear state queue on start-up otherwise the connector will behave as if it is recovering from a failure state and will attempt to get undelivered messages recorded in the out-of-date state message. Therefore, ensure that the state queue is empty each time exactly-once delivery is enabled (especially if re-enabling the exactly once feature).

Exactly-once delivery MQ requirements

The following values are recommended across MQ to facilitate the exactly-once behaviour:

On the channel used for Kafka Connect, HBINT should be set to 30 seconds to allow MQ transaction rollbacks to occur more quickly in failure scenarios.
On the state queue, DEFSOPT should be set to EXCL to ensure the state queue share option is exclusive.

Exactly-once delivery requires that messages are set to not expire and that all messages on state queue are all persistent (this is to ensure correct behaviour around queue manager restarts).

Exactly-once failure scenarios

The MQ sink connector is designed to fail on start-up in certain cases to ensure that exactly-once delivery is not compromised. In some of these failure scenarios, it will be necessary for an MQ administrator to remove messages from the exactly-once state queue before the MQ sink connector can start up and begin to deliver messages from the sink queue again. In these cases, the MQ sink connector will have the FAILED status and the Kafka Connect logs will describe any required administrative action.

Troubleshooting

Connector in a `FAILED` state

If the connector experiences a non retriable error then a ConnectException will cause the connector to go in to a FAILED state. This will require a manual restart using the Kafka Connect REST API to restart the connector.

Unable to connect to Kafka

You may receive an org.apache.kafka.common.errors.SslAuthenticationException: SSL handshake failed error when trying to run the MQ sink connector using SSL to connect to your Kafka cluster. In the case that the error is caused by the following exception: Caused by: java.security.cert.CertificateException: No subject alternative DNS name matching XXXXX found., Java may be replacing the IP address of your cluster with the corresponding hostname in your /etc/hosts file. For example, to push Docker images to a custom Docker repository, you may add an entry in this file which corresponds to the IP of your repository e.g. 123.456.78.90 mycluster.icp. To fix this, you can comment out this line in your /etc/hosts file.

Unsupported cipher suite

When configuring TLS connection to MQ, you may find that the queue manager rejects the cipher suite, in spite of the name looking correct. There are two different naming conventions for cipher suites (https://www.ibm.com/support/knowledgecenter/SSFKSJ_9.1.0/com.ibm.mq.dev.doc/q113220_.htm). Setting the configuration option mq.ssl.use.ibm.cipher.mappings=false often resolves cipher suite problems.

`MQRC_NOT_AUTHORIZED` exception

When attempting to send a message to an IBM MQ queue, an MQException with code MQRC_NOT_AUTHORIZED (reason code 2035) and completion code 2 is thrown. This indicates insufficient permissions on the queue and the queue manager.

Resolving the problem

Review permissions: Ensure that the user has necessary permissions for accessing the queue and the queue manager.
Grant authority: If the user does not have the necessary permissions, assign required authorities to the user.
Set Context: Set WMQ_MQMD_MESSAGE_CONTEXT property for required properties.

Configure the mq.message.mqmd.context property according to the message context. Options include:
- ALL, which corresponds to WMQ_MDCTX_SET_ALL_CONTEXT
- IDENTITY, mapped to WMQ_MDCTX_SET_IDENTITY_CONTEXT
Important: If your message contains any of the following properties, you must ensure that WMQ_MQMD_MESSAGE_CONTEXT is set to either WMQ_MDCTX_SET_IDENTITY_CONTEXT or WMQ_MDCTX_SET_ALL_CONTEXT:
- JMS_IBM_MQMD_UserIdentifier
- JMS_IBM_MQMD_AccountingToken
- JMS_IBM_MQMD_ApplIdentityData
Similarly, if your message includes any of the following properties, set the WMQ_MQMD_MESSAGE_CONTEXT field to WMQ_MDCTX_SET_ALL_CONTEXT:
- JMS_IBM_MQMD_PutApplType
- JMS_IBM_MQMD_PutApplName
- JMS_IBM_MQMD_PutDate
- JMS_IBM_MQMD_PutTime
- JMS_IBM_MQMD_ApplOriginData
Other message properties do not require the mq.message.mqmd.context property.

Additional tips

Verify that the length of all properties are correctly set within the allowed limit.
Do not set the JMS_IBM_MQMD_BackoutCount property.
Refer to the IBM MQ documentation for detailed configuration guidance:
- IBM MQ JMS Message Object Properties: This documentation provides details about various properties that can be set on IBM MQ JMS message objects, including their names, types, and descriptions.
- IBM MQ Developer Community: The developer community for IBM MQ, where you can find forums, articles, and resources related to development and troubleshooting for IBM MQ.
- IBM MQ troubleshooting guide: IBM guide for troubleshooting common issues and errors in IBM MQ.

Support

A commercially supported version of this connector is available for customers with a support entitlement for IBM Event Streams or IBM Cloud Pak for Integration.

Issues and contributions

For issues relating specifically to this connector, please use the GitHub issue tracker. If you do want to submit a Pull Request related to this connector, please read the contributing guide first to understand how to sign your commits.

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

(http://www.apache.org/licenses/LICENSE-2.0)

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.The project is licensed under the Apache 2 license.

ibm-messaging/kafka-connect-mq-sink

Kafka Connect sink connector for IBM MQ

Contents

Building the connector

Running the connector

Running in standalone mode

Running in distributed mode

Running with Docker

Deploying to Kubernetes

Creating Kafka Connect configuration Secret and ConfigMap

Creating Kafka Connect deployment and service in Kubernetes

Deploying to OpenShift using Strimzi

Start a Kafka Connect cluster using KafkaConnectS2I

Add the MQ sink connector to the cluster

Start an instance of the MQ sink connector using KafkaConnector

Data formats

The gory detail

Key support and partitioning

Security

Setting up TLS using a server-side certificate

Setting up TLS for mutual authentication

Troubleshooting

Configuration

Using a CCDT file

Externalizing secrets

Example: externalizing secrets with FileConfigProvider

Using FileConfigProvider in Kubernetes

Exactly-once message delivery semantics

Exactly-once delivery Kafka Connect worker configuration

Exactly-once delivery MQ sink connector configuration

Exactly-once delivery MQ requirements

Exactly-once failure scenarios

Troubleshooting

Connector in a FAILED state

Unable to connect to Kafka

Unsupported cipher suite

MQRC_NOT_AUTHORIZED exception

Resolving the problem

Additional tips

Support

Issues and contributions

License

Connector in a `FAILED` state

`MQRC_NOT_AUTHORIZED` exception