Cardano CLI Guru

Cardano CLI Guru provides a wealth of convenient utility scripts to simplify the use of cardano-cli, as well as a guided tutorial to walk you through various cardano-cli operations.

This utility uses direnv to set and unset various environment variables whenever you navigate in and out of the cardano-cli-guru directory, allowing for more convenient use of cardano-cli without polluting your ~/.bashrc or other dotfiles with additional variables. These local variables can be adjusted to your needs by modifying the contents of the .env file that is automatically created when you allow direnv to run in the directory the first time.

Setup

Install cardano-node and cardano-cli.
- You can use the Cardano EZ-Installer to easily install both applications via Nix and automatically configure your node for use with all three networks (preprod and preview testnets, mainnet).
Install the direnv utility.
- If you have Nix installed, the easiest way to do this is via the following Nix command:
```
nix profile install nixpkgs#direnv
```
  NOTE: this command requires the experimental-features nix-command and flakes to be enabled in your /etc/nix/nix.conf file:
```
experimental-features = nix-command flakes
```
  You'll need to restart the nix-daemon after making changes to nix.conf:
  
  Linux:
```
sudo systemctl restart nix-daemon
```
  MacOS:
```
sudo launchctl stop org.nixos.nix-daemon
sudo launchctl start org.nixos.nix-daemon
```
Clone this repository in your terminal and navigate to the cardano-cli-guru directory:
```
git clone https://github.com/iburzynski/cardano-cli-guru
cd cardano-cli-guru
```
You will see the following error message:
```
direnv: error /home/your-username/path-to-cardano-cli-guru/.envrc is blocked. Run `direnv allow` to approve its content
```
This is a security measure, since .envrc files can run arbitrary shell commands. Make sure you always trust the author of a project and inspect the contents of its .envrc file before running direnv allow.

When you're ready, enter direnv allow to approve the content:
```
direnv allow
```
Adjust .env variables as needed.
- When you allow direnv to run in the cardano-cli-guru directory, a .env file is automatically created containing various environment variables with default settings. These variables are used by cardano-cli and the various utility scripts provided by cardano-cli-guru and can be adjusted according to your needs.
- The CARDANO_NODE_NETWORK_ID variable tells cardano-cli which network your node is currently using. By default this is set to 2 for preview testnet. Change this value to 1 if you want your node to run on the preprod testnet, or to mainnet for the mainnet.
- Two variables are defined for interacting with Blockfrost, which is used to retrieve transaction metadata in the Tutorial. You can replace the placeholder value for either BLOCKFROST_PROJECT_ID_PREPRODor BLOCKFROST_PROJECT_ID_PREVIEW with your Blockfrost Project ID, depending on which network you are using in your Blockfrost project.
- The remaining *PATH variables are set to existing subdirectories of cardano-cli-guru, and tell the utility scripts where to store the various output files of the utility scripts. You can change these to point to different directories if you'd like your output files to be stored somewhere else, although it is easier to keep the default locations.
  
  NOTE: if you wish to change any of the *PATH variables, make sure your filepaths are defined relative to the cardano-cli-guru directory, or use absolute filepaths.
- If you changed any values in .env, run direnv allow again in the cardano-cli-guru directory so direnv updates the variables.
  
  NOTE: You must run direnv allow whenever you modify .env, or the variables will still be set to their previous values in the environment.
Start cardano-node.
- You're now ready to start your node and begin using cardano-cli. In a separate terminal session, run the appropriate command to start cardano-node on your desired network (i.e. preprod-node or preview-node if you installed using Cardano EZ-Installer).
  
  NOTE: Make sure the value of CARDANO_NODE_NETWORK_ID in the .env file corresponds to the network you are running!
- It's normal for the node to encounter occasional errors, which it will recover from and continue running. To tell if your node is working properly, look for Chain extended log entries with the following format:
```
Chain extended, new tip: c472036b83c119b875e3fc230435b741598677ffa45ea3ad8ad9cda3f70a872d at slot 12227931
```
- After giving the node a little time to boot up, try running the tip command from the cardano-cli-guru directory. You should see output informing you of the current slot number and the percentage that your node is synced. Once your node is 100% synced you can begin using the other utility scripts to interact with the blockchain.
```
$ tip

{
    "block": 546242,
    "epoch": 141,
    "era": "Babbage",
    "hash": "7ee471e26ed927ae463d386cdd322fd7f3afb18d0fef462255ce2a2f221d7112",
    "slot": 12227857,
    "syncProgress": "100.00"
}
```
- When you are finished, make sure to properly close the node connection by typing CTRL + c in the terminal session where it's running. If you close the terminal without doing this, the socket will remain open and you won't be able to start the node again unless you manually kill the associated process or restart your system!

At this point you're ready to begin using cardano-cli with Cardano CLI Guru!

`cardano-cli` Tutorial

Cardano CLI Guru provides a tutorial in cardano-cli-guru/tutorial, with guided exercises for building/submitting various types of transactions using cardano-cli. The tutorial begins with the simplest possible transaction and progresses through increasingly complex examples.

Many prewritten utility scripts have been provided to make the process less laborious, but you should always inspect the contents of these scripts before using them to understand the structure of the underlying cardano-cli commands.

For example, if we inspect the contents of the tip script at cardano-cli-guru/scripts/tip we'll see the following:

# cardano-cli-guru/scripts/tip

cardano-cli query tip

This script uses cardano-cli's query command to query information about the tip of the chain.

iburzynski/cardano-cli-guru

Cardano CLI Guru

Setup

cardano-cli Tutorial

`cardano-cli` Tutorial