BMBurner is a Arduino based EPROM Programmer that can Read/Write/Verify Chips (27C256 and SST 27SF512)
- Windows Tool (BMBurner.exe) to Read/Write/Verify Chips
- Project Files to Update BMBurner or to Create your own
- Driver for CH340 Chipset (BMBurner) : CH340 Driver
- Driver for FTDI Chipset (Moates) : FTDI Driver
- Download and Install the CH340 Driver if not already done
- Download and Install the Arduino Software if not already done
- Download and Open the Project Files of BMBurner
- Copy the folder 'Arduino_BMBurn' into 'Documents\Arduino\libraries'
- (exemple : C:\Users\YOUR_USERNAME\Documents\Arduino\libraries\Arduino_BMBurn)
- Open Arduino Software
- Load the Project 'Arduino_BMBurn'
- Select 'Arduino Nano' in 'Tools/Board'
- Select 'Atmega328P' in 'Tools/Processor'
- Select the BMBurner Serial Port in 'Tools/Port'
- Clic on Upload!
- 27C32 (Read-Only)
- 2732A (Read-Only)
- 27C64 (Read-Only)
- 27C128 (Read-Only)
- 27C256 (Read-Only)
- 27C512 (Read-Only)
- 27SF256 (Read-Only)
- 27SF512
- 28C64
- 28C256
- 29C256
- W27C512
- W27E512
*** Image may differ from the updated tool ***
- Load File to Buffer
- Save Buffer to File
- Read Chip
- Program Chip
- Verify Chip
- Blank Check
- Erase Chip
- Edit Reading/Writing Chip addressing
- Edit Reading/Writing Buffer addressing
- Much Mores...
- Windows XP|Vista|7|8|10 (.net framework 3.5 installed)
- 1x Arduino Nano/Uno (any arduino with atmega328 as microcontroller should work with same pinouts)
- 1x 28Pin ZIF Socket
- 2x 1K Resistors
- 6x 22K Resistors
- 3x 0.1uF Capacitors
- 2x 74HC595 (or other replacement)
- 2x 2N4401 (or other replacement)
- 2x 2N3906 (or other replacement)
- 1x Step-Up Converter (usually input 5v and output 12v, it produce 12v out of a 5v signal)
You can donate to me using This Link.