Neo Vim (VS Code Neovim)

Neovim integration for Visual Studio Code

For those who don't know Neovim is the fork of VIM to allow greater VIM extensibility and embeddability. The extension is using full embedded neovim instance as backend (with the exception of the insert mode and window/buffer/file management), no more half-complete VIM emulation

VSCodeVim has neovim integration but it doesn't use it for anything but ex-commands (e.g. commands like :normal) and relying for own emulated implementation for anything else.

Please report any issues/suggestions to vscode-neovim repository

Installation

Install vscode-neovim extension
Install Neovim Required version 0.4.2 or greater
If you already have big & custom init.vim i'd recommend to wrap existing settings & plugins with if !exists('g:vscode') check to prevent potential breakings and problems

Neovim 0.4+ is required. Any version lower than that won't work. Many linux distributions have an old version of neovim in their package repo - always check what version are you installing.

WSL

If you want to use WSL version of neovim, set useWSL configuration toggle and specify linux path to nvim binary. wsl.exe windows binary and wslpath linux binary are required for this. wslpath must be available through $PATH linux env setting.

Features

Almost fully feature-complete VIM integration by utilizing neovim
First-class VSCode insert mode. The plugin unbinds self from the type event in the insert mode, so no typing lag and freezing anymore when long completion popup appears.
Fully working VSCode features - autocompletion/go to definition/snippets/multiple cursors/etc...
vimrc/vim plugins/etc are supported (few plugins don't make sense with vscode, such as nerdtree)

Requirements

Neovim 0.4.2 or greater

Set neovim path in the extension settings and you're good to go. Important you must specify full path to neovim, like C:\Neovim\bin\nvim.exe or /usr/local/bin/nvim

Important

Visual modes are not producing real vscode selections (few versions had this feature previously, but it was implemented through ugly & hacky workarounds). Any vscode commands expecting selection won't work. To round the corners, invoking VSCode command picker through the default hotkeys (f1/ctrl/cmd+shift+p) from visual mode converts vim selection to real vscode selection. Also commenting/indenting/formatting works out of the box too. If you're using some custom mapping for calling vscode commands and depends on real vscode selection, you can use VSCodeNotifyRange/VSCodeNotifyRangePos (the first one linewise, the latter characterwise) functions which will convert visual mode selection to vscode selection before calling the command. See this for example and mapping
The extenison for now works best if editor.scrollBeyondLastLine is disabled.
When you type some commands they may be substituted for the another, like :write will be replaced by :Write. This is normal.
File/tab/window management (:w/q/etc...) commands are substituted and mapped to vscode actions. If you're using some custom commands/custom mappings to them, you might need to rebind them to call vscode actions instead. See reference links below for examples if you want to use custom keybindngs/commands. DO NOT use vim :w, etc... in scripts/keybindings, they won't work.
It's better to use spaces instead of tabs for file indent. <C-v> is broken for tab indents

VSCode specific features and differences

O, o keys mapped to vscode editor.action.insertLineBefore/insertLineAfter command thus dont support count prefix
=, == are mapped to editor.action.formatSelection
It's possible to call vscode commands from neovim. See VSCodeCall/VSCodeNotify vim functions in vscode-neovim.vim file. VSCodeCall is blocking request, while VSCodeNotify is not (see below)
Scrolling is done by VSCode side. <C-d>/<C-u>/etc... are slighly different
File management commands such as e / w / q etc are mapped to corresponding vscode commands and behavior may be different (see below)
gf/gd/<C-] are mapped to editor.action.revealDefinition (Shortcut F12). also <C-]> works in vim helps files
gF/gD are mapped to editor.action.peekDefinition (opens definition in peek)
<C-w>gF/<C-w>gf/<C-w>gd are mapped to editor.action.revealDefinitionAside (original vim command - open new tab and go to the file under cursor, but vscode/vim window/tabs metaphors are completely different, so it's useful to do slighlty different thing here)

Performance/Latency problems

If you have any performance problems (cursor jitter usually) make sure you're not using these kinds of extensions:

Line number extensions (VSCode has built-in support for normal/relative line numbers)
Indent guide extensions (VSCode has built-in indent guides)
Brackets highlighter extensions (VSCode has built-in feature)
Anything that renders decorators/put something into vscode gutter very often, e.g. on each cursor/line move

Such extension may be fine and work well, but combined with any extension which should control the cursor position (such as any vim extension) it may work very bad, due to shared vscode extension host between all extensions (E.g. one extension is taking the control over the host and blocking the other extension, this produces jitter).

If you're not sure, disable all other extensions except mine, reload vscode/window and see if the problem persist before reporting.

Also there are a reports that some vim settings/vim plugins increase latency and causing performance problems. Make sure you've disabled unneeded plugins. Many of them don't make sense with vscode and may cause any sort of problems. You don't need any code, highlighting, completion, lsp plugins as well any plugins that spawn windows/buffers (nerdtree and similar), fuzzy-finders plugins, etc. You might want to keep navigation/text-objects/text-editing/etc plugins - they should be fine.

Enabling jj or jk as escape keys from the insert mode

Put into your keybindings.json:

for jj

    {
        "command": "vscode-neovim.compositeEscape1",
        "key": "j",
        "when": "neovim.mode == insert",
        "args": "j"
    }

to enable jk add also:

    {
        "command": "vscode-neovim.compositeEscape2",
        "key": "k",
        "when": "neovim.mode == insert",
        "args": "k"
    }

Determining if running in vscode in your init.vim

This should do the trick:

if exists('g:vscode')
    " VSCode extension
else
    " ordinary neovim
endif

Invoking vscode actions from neovim

There are few helper functions that could be used to invoke any vscode commands:

VSCodeNotify(command, ...)/VSCodeCall(command, ...) - invokes vscode command with optional arguments
VSCodeNotifyRange(command, line1, line2, leaveSelection ,...)/VSCodeCallRange(command, line1, line2, leaveSelection, ...) - produces real vscode selection from line1 to line2 and invokes vscode command. Linewise. Put 1 for leaveSelection argument to leave vscode selection after invoking the command
VSCodeNotifyRangePos(command, line1, line2, pos1, pos2, leaveSelection ,...)/VSCodeCallRangePos(command, line1, line2, pos1, pos2, leaveSelection, ...) - produces real vscode selection from line1.pos1 to line2.pos2 and invokes vscode command. Characterwise

Functions with Notify in name are non-blocking, the ones with Call are blocking. Generally use Notify unless you really need a blocking call

Examples:

Produce linewise selection and show vscode commands (default binding)

function! s:showCommands()
    normal! gv
    let startLine = line("v")
    let endLine = line(".")
    call VSCodeNotifyRange("workbench.action.showCommands", startLine, endLine, 1)
endfunction

xnoremap <silent> <C-P> :<C-u>call <SID>showCommands()<CR>

Produce characterwise selection and show vscode commands (default binding):

function! s:showCommands()
    normal! gv
    let startPos = getpos("v")
    let endPos = getpos(".")
    call VSCodeNotifyRangePos("workbench.action.showCommands", startPos[1], endPos[1], startPos[2], endPos[2], 1)
endfunction

xnoremap <silent> <C-P> :<C-u>call <SID>showCommands()<CR>

Run Find in files for word under cursor in vscode:

nnoremap <silent> ? :<C-u>call VSCodeNotify('workbench.action.findInFiles', { 'query': expand('<cword>')})<CR>

Open definition aside (default binding):

nnoremap <silent> <C-w>gd :<C-u>call VSCodeNotify('editor.action.revealDefinitionAside')<CR>

Jumplist

Jumplist lifetime is mapped to vscode's view column lifetime and not persisted between restarts. Also jumplist is not inherited for split/etc... commands

Wildmenu completion

Command menu has the wildmenu completion on type. The completion options appear after 1.5s (to not bother you when you write :w or :noh). <C-n>/<C-p> selects the option and <Tab> accepts it. See the gif:

Multiple cursors

Multiple cursors work in:

Insert mode
(Optional) Visual line mode
(Optional) Visual block mode

To spawn multiple cursors from visual line/block modes type ma/mA or mi/mI (by default). The effect differs:

For visual line mode mi will start insert mode on each selected line on the first non whitespace characeter and ma will on the end of line
For visual block mode mi will start insert on each selected line before the cursor block and ma after
mA/mI versions account empty lines too (only for visual line mode, for visual block mode they're same as ma/mi)

See gif in action:

Custom keymaps for scrolling/window/tab/etc... management

See vscode-scrolling.vim for scrolling commands reference
See vscode-file-commands.vim for file commands reference
See vscode-tab-commands.vim for tab commands reference
See vscode-window-commands.vim for window commands reference

File/Tab management commands

:e[dit] or ex

:e without argument and without bang (!) - opens quickopen window
:e! without argument and with bang - opens open file dialog
:e [filename] , e.g. :e $MYVIMRC - opens a file in new tab. The file must exist
:e! [filename], e.g. :e! $MYVIMRC - closes current file (discard any changes) and opens a file. The file must exist

ene[w]

enew Creates new untitled document in vscode
enew! closes current file (discard any changes) and creates new untitled document

fin[d]

Opens vscode's quick open window. Arguments and count are not supported

w[rite]

Without bang (!) saves current file
With bang opens 'save as' dialog

sav[eas]

Opens 'save as' dialog

wa[ll]

Saves all files. Bang is not doing anything

q[uit] or keys <C-w> q / <C-w> c

Closes the active editor

wq

Saves and closes the active editor

qa[ll]

Closes all editors, but doesn't quit vscode. Acts like qall!, so beware for a nonsaved changes

wqa[ll]/xa[ll]

Saves all editors & close

tabe[dit]

Similar to e[dit]. Without argument opens quickopen, with argument opens the file in new tab

tabnew

Opens new untitled file

tabf[ind]

Opens quickopen window

tab/tabs

Not supported. Doesn't make sense with vscode

tabc[lose]

Closes active editor (tab)

tabo[nly]

Closes other tabs in vscode group (pane). This differs from vim where a tab is a like a new window, but doesn't make sense in vscode.

tabn[ext] or key gt

Switches to next (or count tabs if argument is given) in the active vscode group (pane)

tabp[revious] or key gT

Switches to previous (or count tabs if argument is given) in the active vscode group (pane)

tabfir[st]

Switches to the first tab in the active editor group

tabl[ast]

Switches to the last tab in the active edtior group

tabm[ove]

Not supported yet

Keys ZZ and ZQ are bound to :wq and q! respectively

Buffer/window management commands

Note: split size distribution is controlled by workbench.editor.splitSizing setting. By default it's distribute, which is mapped to vim's equalalways and eadirection = 'both' (default)

sp[lit] or key <C-w> s

Split editor horizontally. When argument given opens the specified file in the argument, e.g :sp $MYVIMRC. File must exist

vs[plit] or key <C-w> v

Split editor vertically. When argument given opens the specified file in the argument. File must exist

new or key <C-w> n

Like sp[lit] but creates new untitled file if no argument given

vne[w]

Like vs[plit] but creates new untitled file if no argument given

<C-w> ^

Not supported yet

vert[ical]/lefta[bove]/etc...

Not supported yet

on[ly] or key <C-w> o

Without bang (!) Merges all editor groups into the one. Doesn't close editors
With bang closes all editors from all groups except current one

<C-w> j/k/h/l

Focus group below/above/left/right

<C-w> <C-j>/<C-i>/<C-h>/<C-l>

Move editor to group below/above/left/right. Vim doesn't have analogue mappings. Note: <C-w> <C-i> moves editor up. Logically it should be <C-w> <C-k> but vscode has many commands mapped to <C-k> [key] and doesn't allow to use <C-w> <C-k> without unbinding them first

<C-w> r/R/x

Not supported use <C-w> <C-j> and similar to move editors

<C-w> w or <C-w> <C-w>

Focus next group. The behavior may differ than in vim

<C-w> W or <C-w> p

Focus previous group. The behavior may differ than in vim. <C-w> p is completely different than in vim

<C-w> t

Focus first editor group (most top-left)

<C-w> b

Focus last editor group (most bottom-right)

<C-w> H/K/J/L

Not supported yet

<C-w> =

Align all editors to have the same width

[count]<C-w> > or [count]<C-w> +

Increase editor size by count. Both width & height are increased since in vscode it's not possible to control individual width/height

[count]<C-w> < or [count]<C-w> -

Decrease editor size by count. Both width & height are increased since in vscode it's not possible to control individual width/height

<C-w> _

Toggle maximized editor size. Pressing again will restore the size

Insert mode special keys

Enabled by useCtrlKeysForInsertMode = true (default true)

Key	Desc	Status
`CTRL-r [0-9a-z"%#*+:.-=]`	Paste from register	Works
`CTRL-a`	Paste previous inserted content	Works
`CTRL-u`	Delete all text till begining of line, if empty - delete newline	Bound to VSCode key
`CTRL-w`	Delete word left	Bound to VSCode key
`CTRL-h`	Delete character left	Bound to VSCode key
`CTRL-t`	Indent lines right	Bound to VSCode indent line
`CTRL-d`	Indent lines left	Bound to VSCode outindent line
`CTRL-j`	Insert line	Bound to VSCode insert line after

Other keys are not supported in insert mode

Normal mode control keys

Enabled by useCtrlKeysForNormalMode = true (default true)

Refer to vim manual to get help what they're doing

CTRL-a
CTRL-b
CTRL-c
CTRL-d
CTRL-e
CTRL-f
CTRL-i
CTRL-o
CTRL-r
CTRL-u
CTRL-v
CTRL-w
CTRL-x
CTRL-y
CTRL-]
CTRL-j
CTRL-k
CTRL-l
CTRL-h
CTRL-/

Other control keys are not being sent (Usually useless with vscode)

Cmdline control keys (always enabled)

CTRL-h (delete one character left)
CTRL-w (delete word left)
CTRL-u (clear line)
CTRL-g / CTRL-t (in incsearch mode moves to next/previous result)
CTRL-l (add next character under the cursor to incsearch)
CTRL-n / CTRL-p (select next/previous wildmenu completion)
Tab - Select suggestion

Pass additional keys to neovim or disable existing ctrl keys mappings

To pass additional ctrl key sequence, for example add to your keybindings.json:

    {
        "command": "vscode-neovim.send",
        "key": "ctrl+tab",
        "when": "editorTextFocus && neovim.mode != insert",
        "args": "<C-Tab>"
    }

To disable existing ctrl key sequence, for example Ctrl+A add to your keybindings.json

    {
        "command": "-vscode-neovim.send",
        "key": "ctrl+a"
    }

Vim-easymotion

Speaking honestly, original vim-easymotion works fine and as expected... except one thing: it really replaces your text with markers then restores back. It may work for VIM but for VS Code it leads to broken text and many errors reported while you're jumping. For this reason i created the special vim-easymotion fork which doesn't touch your text and instead use vscode text decorations. Just add my fork to your vim-plug block or by using your favorite vim plugin installer and delete original vim-easymotion. Also overwin motions won't work (obviously) so don't use them. Happy jumping!

Vim-commentary

You can use vim-commentary if you like it. But vscode already has such functionality so why don't use it? Add to your init.vim/init.nvim

xmap gc  <Plug>VSCodeCommentary
nmap gc  <Plug>VSCodeCommentary
omap gc  <Plug>VSCodeCommentary
nmap gcc <Plug>VSCodeCommentaryLine

Similar to vim-commentary, gcc is comment line (accept count), use gc with motion/in visual mode. VSCodeCommentary is just a simple function which calls editor.action.commentLine

Known Issues

See Issues section

How it works

VScode connects to neovim instance
When opening a some file, a scratch buffer is created in nvim and being init with text content from vscode
Normal/visual mode commands are being sent directly to neovim. The extension listens for buffer events and applies edits from neovim
When entering the insert mode, the extensions stops listen for keystroke events and delegates typing mode to vscode (no neovim communication is being performed here)
After pressing escape key from the insert mode, extension sends changes obtained from the insert mode to neovim

Credits & External Resources

vim-altercmd - Used for rebinding default commands to call vscode command
neovim nodejs client - NodeJS library for communicating with Neovim

ifnk/vscode-neovim