=================================================================
Linux* Open-iSCSI
=================================================================
Sep 29, 2016
Contents
========
- 1. In This Release
- 2. Introduction
- 3. Installation
- 4. Open-iSCSI daemon
- 5. Open-iSCSI Configuration Utility
- 6. Configuration
- 7. Getting Started
- 8. Advanced Configuration
- 9. iSCSI System Info
1. In This Release
==================
This file describes the Linux* Open-iSCSI Initiator. The software was
tested on AMD Opteron (TM) and Intel Xeon (TM).
The latest development release is available at:
http://www.open-iscsi.com
For questions, comments, contributions send e-mail to:
open-iscsi@googlegroups.com
1.1. Features
=============
- highly optimized and very small-footprint data path;
- persistent configuration database;
- SendTargets discovery;
- CHAP;
- PDU header Digest;
- multiple sessions;
2. Introduction
===============
The Open-iSCSI project is a high-performance, transport independent,
multi-platform implementation of RFC3720 iSCSI.
Open-iSCSI is partitioned into user and kernel parts.
The kernel portion of Open-iSCSI is a from-scratch code
licensed under GPL. The kernel part implements iSCSI data path
(that is, iSCSI Read and iSCSI Write), and consists of three
loadable modules: scsi_transport_iscsi.ko, libiscsi.ko and iscsi_tcp.ko.
User space contains the entire control plane: configuration
manager, iSCSI Discovery, Login and Logout processing,
connection-level error processing, Nop-In and Nop-Out handling,
and (in the future:) Text processing, iSNS, SLP, Radius, etc.
The user space Open-iSCSI consists of a daemon process called
iscsid, and a management utility iscsiadm.
3. Installation
===============
As of today, the Open-iSCSI Initiator requires a host running the
Linux operating system with kernel version 2.6.16 or later. 2.6.14 and
2.6.15 are partially supported. Known issues with 2.6.14 - .15 support:
- If the device is using a write back cache, during session logout
the cache sync command will fail.
- iscsiadm's -P 3 option will not print out scsi devices.
- iscsid will not automatically online devices.
You need to enable "Cryptographic API" under "Cryptographic options" in the
kernel config. And you must enable "CRC32c CRC algorithm" even if
you do not use header or data digests. They are the kernel options
CONFIG_CRYPTO and CONFIG_CRYPTO_CRC32C, respectively.
The userspace components iscsid, iscsiadm and iscsistart require the
open-isns library, which can be found here:
https://github.com/gonzoleeman/open-isns/releases
To install the open-isns headers and library required for open-iscsi, download
the current release and run:
./configure
make
make install
make install_hdrs
make install_lib
By default the kernel's iSCSI modules will be used. Running:
make
make install
will install the iSCSI tools iscsiadm and iscsid to /sbin.
For 2.6.14 - 2.6.34 the modules in the kernel dir can be built and installed
by running:
make kernel
When building those modules the kernel source found at
/lib/modules/`uname -r`/build
will be used to compile the open-iscsi modules. To specify a different
kernel to build against, use:
make kernel KSRC=<kernel-src>
or to use cross-compilation:
make kernel KSRC=<kernel-src> KARCH="ARCH=um"
To compile on SUSE Linux you'll have to use
make kernel KSRC=/usr/src/linux \
KBUILD_OUTPUT=/usr/src/linux-obj/<arch>/<config>
where <config> is the kernel configuration to use (eg. 'smp').
To install the kernel modules that were built, run:
make install_kernel
This will copy iscsi_tcp.ko, libiscsi_tcp.ko, libiscsi.ko and
scsi_transport_iscsi.ko to
/lib/modules/`uname -r`/kernel/drivers/scsi/
overwriting existing iscsi modules.
For Debian, be sure to install the linux-headers package that
corresponds to your kernel in order to compile the kernel modules
('aptitude install linux-headers-`uname -r`'). You may also wish to
run 'make -C kernel/ dpkg_divert' before installing kernel modules if
you run a Debian-provided kernel. This will use dpkg-divert(8) to
move the packaged kernel modules out of the way, and ensure that
future kernel upgrades will not overwrite them.
Also, please be aware that the compatibility patches that enable these
iscsi modules to run on kernels older than 2.6.25 will not update the
ib_iser module; you may get warnings related to mismatched symbols on
this driver, in which case you'll be unable to load ib_iser and
open-iscsi simultaneously.
4. Open-iSCSI daemon
====================
The daemon implements control path of iSCSI protocol, plus some management
facilities. For example, the daemon could be configured to automatically
re-start discovery at startup, based on the contents of persistent
iSCSI database (see next section).
For help, run:
iscsid --help
The output will be similar to the following.
Usage: iscsid [OPTION]
-c, --config=[path] Execute in the config file (/etc/iscsi/iscsid.conf).
-f, --foreground run iscsid in the foreground
-d, --debug debuglevel print debugging information
-u, --uid=uid run as uid, default is current user
-g, --gid=gid run as gid, default is current user group
-h, --help display this help and exit
-v, --version display version and exit
5. Open-iSCSI Configuration Utility
===================================
Open-iSCSI persistent configuration is stored in a number of
directories under a configuration root directory, using a flat-file
format. This configuration root directory is /etc/iscsi by default,
but may also commonly be in /var/lib/iscsi.
Configuration is contained in directories for:
- nodes
- slp
- isns
- static
- fw
- send_targets
- ifaces
The iscsiadm utility is a command-line tool to manage (update, delete,
insert, query) the persistent database.
The utility presents set of operations that a user can perform
on iSCSI nodes, sessions, connections, and discovery records.
Open-iSCSI does not use the term node as defined by the iSCSI RFC,
where a node is a single iSCSI initiator or target. Open-iSCSI uses the
term node to refer to a portal on a target, so tools like iscsiadm
require that --targetname and --portal argument be used when in node mode.
For session mode, a session id (sid) is used. The sid of a session can be
found by running
iscsiadm -m session -P 1
The session id is not currently persistent and is partially determined by
when the session is setup.
Note that some of the iSCSI Node and iSCSI Discovery operations
do not require iSCSI daemon (iscsid) loaded.
For help, run:
iscsiadm --help
The output will be similar to the following.
iscsiadm -m discoverydb [ -hV ] [ -d debug_level ] [-P printlevel] [ -t type -p ip:port -I ifaceN ... [ -Dl ] ] | [ [ -p ip:port -t type] [ -o operation ] [ -n name ] [ -v value ] [ -lD ] ]
iscsiadm -m discovery [ -hV ] [ -d debug_level ] [-P printlevel] [ -t type -p ip:port -I ifaceN ... [ -l ] ] | [ [ -p ip:port ] [ -l | -D ] ]
iscsiadm -m node [ -hV ] [ -d debug_level ] [ -P printlevel ] [ -L all,manual,automatic ] [ -U all,manual,automatic ] [ -S ] [ [ -T targetname -p ip:port -I ifaceN ] [ -l | -u | -R | -s] ] [ [ -o operation ] [ -n name ] [ -v value ] ]
iscsiadm -m session [ -hV ] [ -d debug_level ] [ -P printlevel] [ -r sessionid | sysfsdir [ -R | -u | -s ] [ -o operation ] [ -n name ] [ -v value ] ]
iscsiadm -m iface [ -hV ] [ -d debug_level ] [ -P printlevel ] [ -I ifacename | -H hostno|MAC ] [ [ -o operation ] [ -n name ] [ -v value ] ] [ -C ping [ -a ip ] [ -b packetsize ] [ -c count ] [ -i interval ] ]
iscsiadm -m fw [ -d debug_level ] [ -l ]
iscsiadm -m host [ -P printlevel ] [ -H hostno|MAC ] [ [ -C chap [ -x chap_tbl_idx ] ] | [ -C flashnode [ -A portal_type ] [ -x flashnode_idx ] ] | [ -C stats ] ] [ [ -o operation ] [ -n name ] [ -v value ] ]
iscsiadm -k priority
The first parameter specifies the mode to operate in:
-m, --mode <op> specify operational mode op =
<discoverydb|discovery|node|session|iface|fw|host>
Mode "discoverydb"
------------------
-m discoverydb --type=[type] --interface=[iface…] --portal=[ip:port] \
--print=[N] \
--op=[op]=[NEW | UPDATE | DELETE | NONPERSISTENT] \
--discover
This command will use the discovery record settings
matching the record with type=type and
portal=ip:port]. If a record does not exist, it will
create a record using the iscsid.conf discovery
settings.
By default, it will then remove records for
portals no longer returned. And,
if a portal is returned by the target, then the
discovery command will create a new record or modify
an existing one with values from iscsi.conf and the
command line.
[op] can be passed in multiple times to this
command, and it will alter the node DB manipulation.
If [op] is passed in and the value is
"new", iscsiadm will add records for portals that do
not yet have records in the db.
If [op] is passed in and the value is
"update", iscsiadm will update node records using
info from iscsi.conf and the command line for portals
that are returned during discovery and have
a record in the db.
If [op] is passed in and the value is "delete",
iscsiadm will delete records for portals that
were not returned during discovery.
If [op] is passed in and the value is
"nonpersistent", iscsiadm will not store
the portals found in the node DB. This is
only useful with the --login command.
See the example section for more info.
See below for how to setup iscsi ifaces for
software iscsi or override the system defaults.
Multiple ifaces can be passed in during discovery.
For the above commands, "print" is optional. If
used, N can be 0 or 1.
0 = The old flat style of output is used.
1 = The tree style with the inteface info is used.
If print is not used, the old flat style is used.
-m discoverydb --interface=[iface...] --type=[type] --portal=[ip:port] \
--print=[N] \
--op=[op]=[NEW | UPDATE | DELETE | NONPERSISTENT] \
--discover --login
This works like the previous discoverydb command
with the --login argument passed in will also
log into the portals that are found.
-m discoverydb --portal=[ip:port] --type=[type] \
--op=[op] [--name=[name] --value=[value]]
Perform specific DB operation [op] for
discovery portal. It could be one of:
[new], [delete], [update] or [show]. In case of
[update], you have to provide [name] and [value]
you wish to update
op=NEW will create a new discovery record
using the iscsid.conf discovery settings. If it
already exists, it will be overwritten using
iscsid.conf discovery settings.
op=DELETE will delete the discovery record
and records for the targets found through
that discovery source.
op=SHOW will display the discovery record
values. The --show argument can be used to
force the CHAP passwords to be displayed.
Mode "discovery"
----------------
-m discovery --type=[type] --interface=iscsi_ifacename \
--portal=[ip:port] --login --print=[N] \
--op=[op]=[NEW | UPDATE | DELETE | NONPERSISTENT]
perform [type] discovery for target portal with
ip-address [ip] and port [port].
This command will not use the discovery record
settings. It will use the iscsid.conf discovery
settings and it will overwrite the discovery
record with iscsid.conf discovery settings if it
exists. By default, it will then remove records for
portals no longer returned. And,
if a portal is returned by the target, then the
discovery command will create a new record or modify
an existing one with values from iscsi.conf and the
command line.
[op] can be passed in multiple times to this
command, and it will alter the DB manipulation.
If [op] is passed in and the value is
"new", iscsiadm will add records for portals that do
not yet have records in the db.
If [op] is passed in and the value is
"update", iscsiadm will update node records using
info from iscsi.conf and the command line for portals
that are returned during discovery and have
a record in the db.
If [op] is passed in and the value is "delete",
iscsiadm will delete records for portals that
were not returned during discovery.
If [op] is passed in and the value is
"nonpersistent", iscsiadm will not store
the portals found in the node DB.
See the example section for more info.
See below for how to setup iscsi ifaces for
software iscsi or override the system defaults.
Multiple ifaces can be passed in during discovery.
-m discovery --print=[N]
display all discovery records from internal
persistent discovery database.
Mode "node"
-----------
-m node display all discovered nodes from internal
persistent discovery database
-m node --targetname=[name] --portal=[ip:port] \
--interface=iscsi_ifacename] \
[--login|--logout|--rescan|--stats]
-m node --targetname=[name] --portal=[ip:port]
--interface=[driver,HWaddress] \
--op=[op] [--name=[name] --value=[value]]
-m node --targetname=[name] --portal=[ip:port]
--interface=iscsi_ifacename] \
--print=[level]
perform specific DB operation [op] for specific
interface on host that will connect to portal on
target. targetname, portal and interface are optional.
See below for how to setup iscsi ifaces for
software iscsi or override the system defaults.
op could be one of:
[new], [delete], [update] or [show]. In case of
[update], you have to provide [name] and [value]
you wish to update.
[delete] - Note that if a session is using the
node record, the session will be logged out then
the record will be deleted.
--rescan will perform a SCSI layer scan of the session
to find new LUNs.
--stats prints the iSCSI stats for the session.
Print level can be 0 to 1.
-m node --logoutall=[all|manual|automatic]
Logout "all" the running sessions or just the ones
with a node startup value manual or automatic.
Nodes marked as ONBOOT are skipped.
-m node --loginall=[all|manual|automatic]
Login "all" the running sessions or just the ones
with a node startup value manual or automatic.
Nodes marked as ONBOOT are skipped.
Mode "session"
--------------
-m session display all active sessions and connections
-m session --sid=[sid] [ --print=level | --rescan | --logout ]
--op=[op] [--name=[name] --value=[value]]
perform operation for specific session with
session id sid. If no sid is given, the operation
will be performed on all running sessions if possible.
--logout and --op work like they do in node mode,
but in session mode targetname and portal info
is not passed in.
Print level can be 0 to 2.
1 = Print basic session info like node we are
connected to and whether we are connected.
2 = Print iscsi params used.
3 = Print SCSI info like LUNs, device state.
If no sid and no operation is given print out the
running sessions.
Mode "iface"
------------
-m iface --interface=iscsi_ifacename --op=[op] [--name=[name] --value=[value]]
--print=level
perform operation on given interface with name
iscsi_ifacename.
See below for examples.
-m iface --interface=iscsi_ifacename -C ping --ip=[ipaddr] --packetsize=[size]
--count=[count] --interval=[interval]
Mode "host"
-----------
-m host [--host=hostno|MAC] --print=level -C chap --op=[SHOW]
Display information for a specific host. The host
can be passed in by host number or by MAC address.
If a host is not passed in, then info
for all hosts is printed.
Print level can be 0 to 4.
1 = Print info for how like its state, MAC, and
netinfo if possible.
2 = Print basic session info for nodes the host
is connected to.
3 = Print iscsi params used.
4 = Print SCSI info like LUNs, device state.
-m host --host=hostno|MAC -C chap --op=[DELETE] --index=[chap_tbl_idx]
Delete chap entry at the given index from chap table.
-m host --host=hostno|MAC -C chap --op=[NEW | UPDATE] --index=[chap_tbl_idx] \
--name=[name] --value=[value]
Add new or update existing chap entry at the given
index with given username and password pair. If index
is not passed then entry is added at the first free
index in chap table.
-m host --host=hostno|MAC -C flashnode
Display list of all the targets in adapter's
flash (flash node), for the specified host,
with ip, port, tpgt and iqn.
-m host --host=hostno|MAC -C flashnode --op=[NEW] --portal_type=[ipv4|ipv6]
Create new flash node entry for the given host of the
specified portal_type. This returns the index of the
newly created entry on success.
-m host --host=hostno|MAC -C flashnode --index=[flashnode_index] \
--op=[UPDATE] --name=[name] --value=[value]
Update the params of the speficied flash node.
The [name] and [value] pairs must be provided for the
params that need to be updated. Multiple params can
be updated using a single command.
-m host --host=hostno|MAC -C flashnode --index=[flashnode_index] \
--op=[SHOW | DELETE | LOGIN | LOGOUT]
op=DELETE|LOGIN|LOGOUT will perform deletion/login/
logout operation on the specified flash node.
op=SHOW will list all params with the values for the
specified flash node. This is the default operation.
See the iscsiadm example section for more info.
Other arguments
---------------
-d, --debug debuglevel print debugging information
-V, --version display version and exit
-h, --help display this help and exit
5.1 iSCSI iface setup
=====================
The next sections describe how to setup iSCSI ifaces so you can bind
a session to a NIC port when using software iscsi (section 5.1.1), and
it describes how to setup ifaces for use with offload cards from Chelsio
and Broadcom (section 5.1.2).
5.1.1 How to setup iSCSI interfaces (iface) for binding
=======================================================
If you wish to allow the network susbsystem to figure out
the best path/NIC to use, then you can skip this section. For example
if you have setup your portals and NICs on different subnets, then
the following is not needed for software iscsi.
Warning!!!!!!
This feature is experimental. The interface may change. When reporting
bugs, if you cannot do a "ping -I ethX target_portal", then check your
network settings first. Make sure the rp_filter setting is set to 0 or 2
(see Prep section below for more info). If you cannot ping the portal,
then you will not be able to bind a session to a NIC.
What is a scsi_host and iface for software, hardware and partial
offload iscsi?
Software iscsi, like iscsi_tcp and iser, allocates a scsi_host per session
and does a single connection per session. As a result
/sys/class_scsi_host and /proc/scsi will report a scsi_host for
each connection/session you have logged into. Offload iscsi, like
Chelsio cxgb3i, allocates a scsi_host for each PCI device (each
port on a HBA will show up as a different PCI device so you get
a scsi_host per HBA port).
To manage both types of initiator stacks, iscsiadm uses the interface (iface)
structure. For each HBA port or for software iscsi for each network
device (ethX) or NIC, that you wish to bind sessions to you must create
a iface config /etc/iscsi/ifaces.
Prep
----
The iface binding feature requires the sysctl setting
net.ipv4.conf.default.rp_filter to be set to 0 or 2.
This can be set in /etc/sysctl.conf by having the line:
net.ipv4.conf.default.rp_filter = N
where N is 0 or 2. Note that when setting this you may have to reboot
for the value to take effect.
rp_filter information from Documentation/networking/ip-sysctl.txt:
rp_filter - INTEGER
0 - No source validation.
1 - Strict mode as defined in RFC3704 Strict Reverse Path
Each incoming packet is tested against the FIB and if the interface
is not the best reverse path the packet check will fail.
By default failed packets are discarded.
2 - Loose mode as defined in RFC3704 Loose Reverse Path
Each incoming packet's source address is also tested against the FIB
and if the source address is not reachable via any interface
the packet check will fail.
Running
-------
The command
iscsiadm -m iface
will report iface configurations that are setup in /etc/iscsi/ifaces:
iface0 qla4xxx,00:c0:dd:08:63:e8,20.15.0.7,default,iqn.2005-06.com.redhat:madmax
iface1 qla4xxx,00:c0:dd:08:63:ea,20.15.0.9,default,iqn.2005-06.com.redhat:madmax
The format is:
iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname
For software iscsi, you can create the iface configs by hand, but it is
recommended that you use iscsiadm's iface mode. There is an iface.example in
/etc/iscsi/ifaces which can be used as a template for the daring.
For each network object you wish to bind a session to, you must create
a separate iface config in /etc/iscsi/ifaces and each iface config file
must have a unique name which is less than or equal to 64 characters.
Example
-------
If you have NIC1 with MAC address 00:0F:1F:92:6B:BF and NIC2 with
MAC address 00:C0:DD:08:63:E7, and you wanted to do software iscsi over
TCP/IP, then in /etc/iscsi/ifaces/iface0 you would enter:
iface.transport_name = tcp
iface.hwaddress = 00:0F:1F:92:6B:BF
and in /etc/iscsi/ifaces/iface1 you would enter:
iface.transport_name = tcp
iface.hwaddress = 00:C0:DD:08:63:E7
Warning: Do not name an iface config file "default" or "iser".
They are special values/files that are used by the iscsi tools for
backward compatibility. If you name an iface default or iser, then
the behavior is not defined.
To use iscsiadm to create an iface0 similar to the above example, run:
iscsiadm -m iface -I iface0 --op=new
(This will create a new empty iface config. If there was already an iface
with the name "iface0", this command will overwrite it.)
Next, set the hwaddress:
iscsiadm -m iface -I iface0 --op=update \
-n iface.hwaddress -v 00:0F:1F:92:6B:BF
If you had sessions logged in, iscsiadm will not update or overwrite
an iface. You must log out first. If you have an iface bound to a node/portal
but you have not logged in, then iscsiadm will update the config and
all existing bindings.
You should now skip to 5.1.3 to see how to log in using the iface, and for
some helpful management commands.
5.1.2 Setting up an iface for an iSCSI offload card
===================================================
This section describes how to setup ifaces for use with Chelsio, Broadcom and
QLogic cards.
By default, iscsiadm will create an iface for each Broadcom, QLogic and Chelsio
port. The iface name will be of the form:
$transport/driver_name.$MAC_ADDRESS
Running the following command:
iscsiadm -m iface
will report iface configurations that are setup in /etc/iscsi/ifaces:
default tcp,<empty>,<empty>,<empty>,<empty>
iser iser,<empty>,<empty>,<empty>,<empty>
cxgb3i.00:07:43:05:97:07 cxgb3i,00:07:43:05:97:07,<empty>,<empty>,<empty>
qla4xxx.00:0e:1e:04:8b:2e qla4xxx,00:0e:1e:04:8b:2e,<empty>,<empty>,<empty>
The format is:
iface_name transport_name,hwaddress,ipaddress,net_ifacename,initiatorname
iface_name: name of iface
transport_name: name of driver
hwaddress: MAC address
ipaddress: IP address to use for this port
net_iface_name: will be <empty> because change between reboots.
It is used for software iSCSI's vlan or alias binding.
initiatorname: Initiatorname to be used if you want to override the
default one in /etc/iscsi/initiatorname.iscsi.
To display these values in a more friendly way, run:
iscsiadm -m iface -I cxgb3i.00:07:43:05:97:07
Example output:
# BEGIN RECORD 2.0-871
iface.iscsi_ifacename = cxgb3i.00:07:43:05:97:07
iface.net_ifacename = <empty>
iface.ipaddress = <empty>
iface.hwaddress = 00:07:43:05:97:07
iface.transport_name = cxgb3i
iface.initiatorname = <empty>
# END RECORD
Before you can use the iface, you must set the IP address for the port.
We determine the corresponding variable name that we want to update from
the output above, which is "iface.ipaddress".
Then we fill this empty variable with the value we desire, with this command:
iscsiadm -m iface -I cxgb3i.00:07:43:05:97:07 -o update \
-n iface.ipaddress -v 20.15.0.66
Note for QLogic ports: After updating the iface record, you must apply or
applyall the settings for the changes to take effect:
iscsiadm -m iface -I qla4xxx.00:0e:1e:04:8b:2e -o apply
iscsiadm -m iface -H 00:0e:1e:04:8b:2e -o applyall
With "apply", the network settings for the specified iface will take effect.
With "applyall", the network settings for all ifaces on a specific host will
take effect. The host can be specified using the -H/--host argument by either
the MAC address of the host or the host number.
Here is an example of setting multiple IPv6 addresses on a single iSCSI
interface port.
First interface (no need to set iface_num, it is 0 by default):
iscsiadm -m iface -I qla4xxx.00:0e:1e:04:8b:2a -o update \
-n iface.ipaddress -v fec0:ce00:7014:0041:1111:2222:1e04:9392
Create the second interface if it does not exist (iface_num is mandatory here):
iscsiadm -m iface -I qla4xxx.00:0e:1e:04:8b:2a.1 -op=new
iscsiadm -m iface -I qla4xxx.00:0e:1e:04:8b:2a -o update \
-n iface.iface_num -v 1
iscsiadm -m iface -I qla4xxx.00:0e:1e:04:8b:2a -o update \
-n iface.ipaddress -v fec0:ce00:7014:0041:1111:2222:1e04:9393
iscsiadm -m iface -H 00:0e:1e:04:8b:2a --op=applyall
Note: If there are common settings for multiple interfaces then the
settings from 0th iface would be considered valid.
Now, we can use this iface to login into targets, which is described in the
next section.
5.1.3 Discoverying iSCSI targets/portals
========================================
Be aware that iscsiadm will use the default route to do discovery. It will
not use the iface specified. So if you are using an offload card, you will
need a separate network connection to the target for discovery purposes.
*This will be fixed in the next version of open-iscsi*
For compatibility reasons, when you run iscsiadm to do discovery, it
will check for interfaces in /etc/iscsi/iscsi/ifaces that are using
tcp for the iface.transport, and it will bind the portals that are discovered
so that they will be logged in through those ifaces. This behavior can also
be overridden by passing in the interfaces you want to use. For the case
of offload, like with cxgb3i and bnx2i, this is required because the transport
will not be tcp.
For example if you had defined two interfaces but only wanted to use one,
you can use the --interface/-I argument:
iscsiadm -m discoverydb -t st -p ip:port -I iface1 --discover -P 1
If you had defined interfaces but wanted the old behavior, where we do not
bind a session to an iface, then you can use the special iface "default":
iscsiadm -m discoverydb -t st -p ip:port -I default --discover -P 1
And if you did not define any interfaces in /etc/iscsi/ifaces and do
not pass anything into iscsiadm, running iscsiadm will do the default
behavior, allowing the network subsystem to decide which device to use.
If you later want to remove the bindings for a specific target and
iface, then you can run:
iscsiadm -m node -T my_target -I iface0 --op=delete
To do this for a specific portal on a target, run:
iscsiadm -m node -T my_target -p ip:port -I iface0 --op=delete
If you wanted to delete all bindinds for iface0, then you can run:
iscsiadm -m node -I iface0 --op=delete
And for equalogic targets it is sometimes useful to remove just by portal:
iscsiadm -m node -p ip:port -I iface0 --op=delete
Now logging into targets is the same as with software iscsi. See section 7
for how to get started.
5.2 iscsiadm examples
=====================
Usage examples using the one-letter options (see iscsiadm man page
for long options):
Discovery mode
--------------
- SendTargets iSCSI Discovery using the default driver and interface and
using the discovery settings for the discovery record with the
ID [192.168.1.1:3260]:
iscsiadm -m discoverydb -t st -p 192.168.1.1:3260 --discover
This will search /etc/iscsi/send_targets for a record with the
ID [portal = 192.168.1.1:3260 and type = sendtargets. If found it
will perform discovery using the settings stored in the record.
If a record does not exist, it will be created using the iscsid.conf
discovery settings.
The argument to -p may also be a hostname instead of an address:
iscsiadm -m discoverydb -t st -p somehost --discover
For the ifaces, iscsiadm will first search /etc/iscsi/ifaces for
interfaces using software iscsi. If any are found then nodes found
during discovery will be setup so that they can logged in through
those interfaces. To specify a specific iface, pass the
-I argument for each iface.
- SendTargets iSCSI Discovery updating existing target records:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o update --discover
If there is a record for targetX, and portalY exists in the DB, and
is returned during discovery, it will be updated with the info from
the iscsi.conf. No new portals will be added and stale portals
will not be removed.
- SendTargets iSCSI Discovery deleting existing target records:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o delete --discover
If there is a record for targetX, and portalY exists in the DB, but
is not returned during discovery, it will be removed from the DB.
No new portals will be added and existing portal records will not
be changed.
Note: If a session is logged into portal we are going to delete
a record for, it will be logged out then the record will be
deleted.
- SendTargets iSCSI Discovery adding new records:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o new --discover
If there is targetX, and portalY is returned during discovery, and does
not have a record, it will be added. Existing records are not modified.
- SendTargets iSCSI Discovery using multiple ops:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o new -o delete --discover
This command will add new portals and delete records for portals
no longer returned. It will not change the record information for
existing portals.
- SendTargets iSCSI Discovery in nonpersistent mode:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o nonpersistent --discover
This command will perform discovery, but not manipulate the node DB.
- SendTargets iSCSI Discovery with a specific interface.
If you wish to only use a subset of the interfaces in
/etc/iscsi/ifaces, then you can pass them in during discovery:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
--interface=iface0 --interface=iface1 --discover
Note that for software iscsi, we let the network layer select
which NIC to use for discovery, but for later logins iscsiadm
will use the NIC defined in the iface config.
qla4xxx support is very basic and experimental. It does not store
the record info in the card's FLASH or the node DB, so you must
rerun discovery every time the driver is reloaded.
- Manipulate SendTargets DB: Create new SendTargets discovery record or
overwrite an existing discovery record with iscsid.conf
discovery settings:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 -o new
- Manipulate SendTargets DB: Display discovery settings:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 -o show
- Manipulate SendTargets DB: Display hidden discovery settings like
CHAP passwords:
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o show --show
- Manipulate SendTargets DB: Set discovery setting.
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 \
-o update -n name -v value
- Manipulate SendTargets DB: Delete discovery record. This will also delete
the records for the targets found through the discovery source.
iscsiadm -m discoverydb -t sendtargets -p 192.168.1.1:3260 -o delete
- Show all records in discovery database:
iscsiadm -m discovery
- Show all records in discovery database and show the targets that were
discovered from each record:
iscsiadm -m discovery -P 1
Node mode
---------
In node mode you can specify which records you want to log
into by specifying the targetname, ip address, port or interface
(if specifying the interface it must already be setup in the node db).
iscsiadm will search the node db for records which match the values
you pass in, so if you pass in the targetname and interface, iscsiadm
will search for records with those values and operate on only them.
Passing in none of them will result in all node records being operated on.
- iSCSI Login to all portals on every node/starget through each interface
set in the db:
iscsiadm -m node -l
- iSCSI login to all portals on a node/target through each interface set
in the db:
iscsiadm -m node -T iqn.2005-03.com.max -l
- iSCSI login to a specific portal through each interface set in the db:
iscsiadm -m node -T iqn.2005-03.com.max -p 192.168.0.4:3260 -l
To specify an iPv6 address, the following can be used:
iscsiadm -m node -T iqn.2005-03.com.max \
-p 2001:c90::211:9ff:feb8:a9e9 -l
The above command would use the default port, 3260. To specify a
port, use the following:
iscsiadm -m node -T iqn.2005-03.com.max \
-p [2001:c90::211:9ff:feb8:a9e9]:3260 -l
To specify a hostname, the following can be used:
iscsiadm -m node -T iqn.2005-03.com.max -p somehost -l
- iSCSI Login to a specific portal through the NIC setup as iface0:
iscsiadm -m node -T iqn.2005-03.com.max -p 192.168.0.4:3260 \
-I iface0 -l
- iSCSI Logout of all portals on every node/starget through each interface
set in the db:
iscsiadm -m node -u
Warning: this does not check startup values like the logout/login all
option. Do not use this if you are running iscsi on your root disk.
- iSCSI logout of all portals on a node/target through each interface set
in the db:
iscsiadm -m node -T iqn.2005-03.com.max -u
- iSCSI logout of a specific portal through each interface set in the db:
iscsiadm -m node -T iqn.2005-03.com.max -p 192.168.0.4:3260 -u
- iSCSI Logout of a specific portal through the NIC setup as iface0:
iscsiadm -m node -T iqn.2005-03.com.max -p 192.168.0.4:3260 \
-I iface0
- Changing iSCSI parameter:
iscsiadm -m node -T iqn.2005-03.com.max -p 192.168.0.4:3260 \
-o update -n node.cnx[0].iscsi.MaxRecvDataSegmentLength -v 65536
You can also change parameters for multiple records at once, by
specifying different combinations of target, portal and interface
like above.
- Adding custom iSCSI portal:
iscsiadm -m node -o new -T iqn.2005-03.com.max \
-p 192.168.0.1:3260,2 -I iface4
The -I/--interface is optional. If not passed in, "default" is used.
For tcp or iser, this would allow the network layer to decide what is
best.
Note that for this command, the Target Portal Group Tag (TPGT) should
be passed in. If it is not passed in on the initial creation command,
then the user must run iscsiadm again to set the value. Also,
if the TPGT is not initially passed in, the old behavior of not
tracking whether the record was statically or dynamically created
is used.
- Adding custom NIC config to multiple targets:
iscsiadm -m node -o new -I iface4
This command will add an interface config using the iSCSI and SCSI
settings from iscsid.conf to every target that is in the node db.
- Removing iSCSI portal:
iscsiadm -m node -o delete -T iqn.2005-03.com.max -p 192.168.0.4:3260
You can also delete multiple records at once, by specifying different
combinations of target, portal and interface like above.
- Display iSCSI portal onfiguration:
iscsiadm -m node [-o show] -T iqn.2005-03.com.max -p 192.168.0.4:3260
You can also display multiple records at once, by specifying different
combinations of target, portal and interface like above.
Note: running "iscsiadm -m node" will only display the records. It
will not display the configuration info. For the latter, run:
iscsiadm -m node -o show
- Show all node records:
iscsiadm -m node
This will print the nodes using the old flat format where the
interface and driver are not displayed. To display that info
use the -P option with the argument "1":
iscsiadm -m node -P 1
Session mode
------------
- Display session statistics:
iscsiadm -m session -r 1 --stats
This function also works in node mode. Instead of the "-r $sid"
argument, you would pass in the node info like targetname and/or portal,
and/or interface.
- Perform a SCSI scan on a session
iscsiadm -m session -r 1 --rescan
This function also works in node mode. Instead of the "-r $sid"
argument, you would pass in the node info like targetname and/or portal,
and/or interface.
Note: Rescanning does not delete old LUNs. It will only pick up new
ones.
- Display running sessions:
iscsiadm -m session -P 1
Host mode with flashnode submode
--------------------------------
- Display list of flash nodes for a host
iscsiadm -m host -H 6 -C flashnode
This will print list of all the flash node entries for the given host
along with their ip, port, tpgt and iqn values.
- Display all parameters of a flash node entry for a host
iscsiadm -m host -H 6 -C flashnode -x 0
This will list all the parameter name,value pairs for the
flash node entry at index 0 of host 6.
- Add a new flash node entry for a host
iscsiadm -m host -H 6 -C flashnode -o new -A [ipv4|ipv6]
This will add new flash node entry for the given host 6 with portal
type of either ipv4 or ipv6. The new operation returns the index of
the newly created flash node entry.
- Update a flashnode entry
iscsiadm -m host -H 6 -C flashnode -x 1 -o update \
-n flashnode.conn[0].ipaddress -v 192.168.1.12 \
-n flashnode.session.targetname \
-v iqn.2002-03.com.compellent:5000d310004b0716
This will update the values of ipaddress and targetname params of
the flash node entry at index 1 of host 6.
- Login to a flash node entry
iscsiadm -m host -H 6 -C flashnode -x 1 -o login
- Logout from a flash node entry
Logout can be performed either using the flash node index:
iscsiadm -m host -H 6 -C flashnode -x 1 -o logout
or by using the corresponding session index:
iscsiadm -m session -r $sid -u
- Delete a flash node entry
iscsiadm -m host -H 6 -C flashnode -x 1 -o delete
Host mode with chap submode
---------------------------
- Display list of chap entries for a host
iscsiadm -m host -H 6 -C chap -o show
- Delete a chap entry for a host
iscsiadm -m host -H 6 -C chap -o delete -x 5
This will delete any chap entry present at index 5.
- Add/Update a local chap entry for a host
iscsiadm -m host -H 6 -C chap -o update -x 4 -n username \
-v value -n password -v value
This will update the local chap entry present at index 4. If index 4
is free, then a new entry of type local chap will be created at that
index with given username and password values.
- Add/Update a bidi chap entry for a host
iscsiadm -m host -H 6 -C chap -o update -x 5 -n username_in \
-v value -n password_in -v value
This will update the bidi chap entry present at index 5. If index 5
is free then entry of type bidi chap will be created at that index
with given username_in and password_in values.
Host mode with stats submode
----------------------------
- Display host statistics:
iscsiadm -m host -H 6 -C stats
This will print the aggregate statistics on the host adapter port.
This includes MAC, TCP/IP, ECC & iSCSI statistics.
6. Configuration
================
The default configuration file is /etc/iscsi/iscsid.conf. This file contains
only configuration that could be overwritten by iSCSI Discovery,
or manualy updated via iscsiadm utility. Its OK if this file does not
exist, in which case compiled-in default configuration will take place
for newer discovered Target nodes.
See the man page and the example file for the current syntax.
The manpages for iscsid, iscsiadm are in the doc subdirectory and can be
installed in the appropriate man page directories and need to be manually
copied into e.g. /usr/local/share/man8.
7. Getting Started
==================
There are three steps needed to set up a system to use iSCSI storage:
7.1. iSCSI startup using the init script or manual startup.
7.2. Discover targets.
7.3. Automate target logins for future system reboots.
The init scripts will start the iSCSI daemon and log into any
portals that are set up for automatic login (discussed in 7.2)
or discovered through the discover daemon iscsid.conf params
(discussed in 7.1.2).
If your distro does not have an init script, then you will have to start the
daemon and log into the targets manually.
7.1.1 iSCSI startup using the init script
=========================================
Red Hat or Fedora:
-----------------
To start open-iscsi in Red Hat/Fedora you can do:
service open-iscsi start
To get open-iscsi to automatically start at run time you may have to
run:
chkconfig --level <levels> open-iscsi on
Where <levels> are the run levels.
And, to automatically mount a file system during startup
you must have the partition entry in /etc/fstab marked with the "_netdev"
option. For example this would mount an iscsi disk sdb:
/dev/sdb /mnt/iscsi ext3 _netdev 0 0
SUSE or Debian:
---------------
Otherwise, if there is an initd script for your distro in etc/initd that
gets installed with "make install"
/etc/init.d/open-iscsi start
will usually get you started.
7.1.2 Manual Startup
====================
7.1.2.1 Starting up the iSCSI daemon (iscsid) and loading modules
=================================================================
If there is no initd script, you must start the tools by hand. First load the
iscsi modules:
modprobe -q iscsi_tcp
After that, start iSCSI daemon process:
./iscsid
or alternatively, start it with debug enabled and with output
redirected to the current console:
./iscsid -d 8 -f &
7.1.2.2 Logging into Targets
============================
Use the configuration utility, iscsiadm, to add/remove/update Discovery
records, iSCSI Node records or monitor active iSCSI sessions (see above or the
iscsiadm man files and see section 7.2 below for how to discover targets):
./iscsiadm -m node
will print out the nodes that have been discovered as:
10.15.85.19:3260,3 iqn.1992-08.com.netapp:sn.33615311
10.15.84.19:3260,2 iqn.1992-08.com.netapp:sn.33615311
The format is:
ip:port,target_portal_group_tag targetname
If you are using the iface argument or want to see the driver
info, use the following:
./iscsiadm -m node -P 1
Example output:
Target: iqn.1992-08.com.netapp:sn.33615311
Portal: 10.15.84.19:3260,2
Iface Name: iface2
Portal: 10.15.85.19:3260,3
Iface Name: iface2
The format is:
Target: targetname
Portal ip_address:port,tpgt
Iface: ifacename
where targetname is the name of the target and ip_address:port is the address
and port of the portal. tpgt is the Target Portal Group Tag of
the portal, and is not used in iscsiadm commands except for static
record creation. ifacename is the name of the iscsi interface
defined in /etc/iscsi/ifaces. If no interface was defined in
/etc/iscsi/ifaces or passed in, the default behavior is used.
Default here is iscsi_tcp/tcp to be used over whichever NIC the
network layer decides is best.
To login, take the ip, port and targetname from above and run:
./iscsiadm -m node -T targetname -p ip:port -l
In this example we would run:
./iscsiadm -m node -T iqn.1992-08.com.netapp:sn.33615311 \
-p 10.15.84.19:3260 -l
Note: drop the portal group tag from the "iscsiadm -m node" output.
7.2. Discover Targets
=====================
Once the iSCSI service is running, you can perform discovery using
SendTarget with:
iscsiadm -m discoverydb -t sendtargets -p ip:port --discover
where "ip" is the address of the portal and port is the port.
To use iSNS you can run the discovery command with the type as "isns"
and pass in the ip:port:
iscsiadm -m discoverydb -t isns -p ip:port --discover
Both commands will print out the list of all discovered targets and their
portals:
# iscsiadm -m discoverydb -t st -p 10.15.85.19:3260 --discover
10.15.84.19:3260,2 iqn.1992-08.com.netapp:sn.33615311
10.15.85.19:3260,3 iqn.1992-08.com.netapp:sn.33615311
The format for the output is:
ip:port,tpgt targetname
In this example, for the first target the ip address is 10.15.85.19.
The port is 3260. The target portal group is 3. The target name
is iqn.1992-08.com.netapp:sn.33615311.
If you would also like to see the iscsi inteface which will be used
for each session then use the --print=[N]/-P [N] option:
iscsiadm -m discoverydb -t sendtargets -p ip:port -P 1 --discover
will print:
Target: iqn.1992-08.com.netapp:sn.33615311
Portal: 10.15.84.19:3260,2
Iface Name: iface2
Portal: 10.15.85.19:3260,3
Iface Name: iface2
In this example, The IP address of the first portal is 10.15.84.19.
The port is 3260. The target portal group is 3. The target name
is iqn.1992-08.com.netapp:sn.33615311. The iface being used is iface2.
While discovery targets are kept in the discovery db, they are
useful only for re-discovery. The discovered targets (a.k.a. nodes)
are stored as records in the node db.
The discovered targets are not logged into yet. Rather than logging
into the discovered nodes (making LUs from those nodes available as
storage), it is better to automate the login to the nodes we need.
If you wish to log into a target manually now, see section
"7.1.2.2 Logging in targets" above.
7.3. Automate Target Logins for Future System Statups
=====================================================
Note: this may only work for distros with init scripts.
To automate login to a node, use the following with the record ID
(record ID is the targetname and portal) of the node discovered in the
discovery above:
iscsiadm -m node -T targetname -p ip:port --op update -n node.startup -v automatic
To set the automatic setting to all portals on a target through every
interface setup for each protal, the following can be run:
iscsiadm -m node -T targetname --op update -n node.startup -v automatic
Or to set the "node.startup" attribute to "automatic" as default for
all sessions add the following to the /etc/iscsi/iscsid.conf:
node.startup = automatic
Setting this in iscsid.conf will not affect existing nodes. It will only
affect nodes that are discovered after setting the value.
To login to all automated nodes, simply restart the iscsi service, e.g. with:
/etc/init.d/open-iscsi restart
On your next startup the nodes will be logged into automatically.
7.4 Automatic Discovery and Login
=================================
Instead of running the iscsiadm discovery command and editing the
startup setting, iscsid can be configured so that every X seconds
it performs discovery and logs in and out of the portals returned or
no longer returned. In this mode, when iscsid starts it will check the
discovery db for iSNS records with:
discovery.isns.use_discoveryd = Yes
and it will check for SendTargets discovery records that have the setting:
discovery.sendtargets.use_discoveryd = Yes
If set, iscsid will perform discovery to the address every
discovery.isns.discoveryd_poll_inval or
discovery.sendtargets.discoveryd_poll_inval seconds,
and it will log into any portals found from the discovery source using
the ifaces in /etc/iscsi/ifaces.
Note that for iSNS the poll_interval does not have to be set. If not set,
iscsid will only perform rediscovery when it gets a SCN from the server.
# iSNS Note:
# For servers like Microsoft's where they allow SCN registrations, but do not
# send SCN events, discovery.isns.poll_interval should be set to a non zero
# value to auto discover new targets. This is also useful for servers like
# linux-isns (SLES's iSNS server) where it sometimes does not send SCN
# events in the proper format, so they may not get handled.
Examples
--------
SendTargets
-----------
- Create a SendTargets record by passing iscsiadm the "-o new" argument in
discoverydb mode.
iscsiadm -m discoverydb -t st -p 20.15.0.7:3260 -o new
On success, this will output something like:
New discovery record for [20.15.0.7,3260] added.
- Set the use_discoveryd setting for the record.
iscsiadm -m discoverydb -t st -p 20.15.0.7:3260 -o update \
-n discovery.sendtargets.use_discoveryd -v Yes
- Set the polling interval.
iscsiadm -m discoverydb -t st -p 20.15.0.7:3260 -o update \
-n discovery.sendtargets.discoveryd_poll_inval -v 30
To have the new settings take effect, restart iscsid by restarting the
iscsi service.
Note:
When iscsiadm is run with the -o new argument, it will use the
discovery.sendtargets.use_discoveryd and
discovery.sendtargets.discoveryd_poll_inval
settings in iscsid.conf for the records initial settings. So if those
are set in iscsid.conf, then you can skip the iscsiadm -o update
commands.
iSNS
----
- Create an iSNS record by passing iscsiadm the "-o new" argument in
discoverydb mode.
iscsiadm -m discoverydb -t isns -p 20.15.0.7:3205 -o new
Response on success:
New discovery record for [20.15.0.7,3205] added.
- Set the use_discoveryd setting for the record.
iscsiadm -m discoverydb -t isns -p 20.15.0.7:3205 -o update \
-n discovery.isns.use_discoveryd -v Yes
- [OPTIONAL: see iSNS note above] Set the polling interval if needed.
iscsiadm -m discoverydb -t st -p 20.15.0.7:3205 -o update \
-n discovery.isns.discoveryd_poll_inval -v 30
To have the new settings take effect, restart iscsid by restarting the
iscsi service.
Note:
When iscsiadm is run with the -o new argument, it will use the
discovery.isns.use_discoveryd and discovery.isns.discoveryd_poll_inval
settings in iscsid.conf for the record's initial settings. So if those
are set in iscsid.conf, then you can skip the iscsiadm -o update
commands.
8. Advanced Configuration
=========================
8.1 iSCSI settings for dm-multipath
===================================
When using dm-multipath, the iSCSI timers should be set so that commands
are quickly failed to the dm-multipath layer. For dm-multipath you should
then set values like queue if no path, so that IO errors are retried and
queued if all paths are failed in the multipath layer.
8.1.1 iSCSI ping/Nop-Out settings
=================================
To quickly detect problems in the network, the iSCSI layer will send iSCSI
pings (iSCSI NOP-Out requests) to the target. If a NOP-Out times out, the
iSCSI layer will respond by failing running commands and asking the SCSI
layer to requeue them if possible (SCSI disk commands get 5 retries if not
using multipath). If dm-multipath is being used the SCSI layer will fail
the command to the multipath layer instead of retrying. The multipath layer
will then retry the command on another path.
To control how often a NOP-Out is sent, the following value can be set:
node.conn[0].timeo.noop_out_interval = X
Where X is in seconds and the default is 10 seconds. To control the
timeout for the NOP-Out the noop_out_timeout value can be used:
node.conn[0].timeo.noop_out_timeout = X
Again X is in seconds and the default is 15 seconds.
Normally for these values you can use:
node.conn[0].timeo.noop_out_interval = 5
node.conn[0].timeo.noop_out_timeout = 10
If there are a lot of IO error messages, then the above values may be too
aggressive and you may need to increase the values for your network conditions
and workload, or you may need to check your network for possible problems.
8.1.2 replacement_timeout
=========================
The next iSCSI timer that will need to be tweaked is:
node.session.timeo.replacement_timeout = X
Here X is in seconds.
replacement_timeout will control how long to wait for session re-establishment
before failing pending SCSI commands and commands that are being operated on by
the SCSI layer's error handler up to a higher level like multipath or to
an application if multipath is not being used.
8.1.2.1 Running Commands, the SCSI Error Handler, and replacement_timeout
=========================================================================
Remember from the Nop-out discussion that if a network problem is detected,
the running commands are failed immediately. There is one exception to this,
and that is when the SCSI layer's error handler is running. To check if
the SCSI error handler is running, iscsiadm can be run as:
iscsiadm -m session -P 3
You will then see:
Host Number: X State: Recovery
When the SCSI EH is running, commands will not be failed until
node.session.timeo.replacement_timeout seconds.
To modify the timer that starts the SCSI EH, you can either write
directly to the device's sysfs file:
echo X > /sys/block/sdX/device/timeout
where X is in seconds.
Alternatively, on most distros you can modify the udev rule.
To modify the udev rule open /etc/udev/rules.d/50-udev.rules, and find the
following lines:
ACTION=="add", SUBSYSTEM=="scsi" , SYSFS{type}=="0|7|14", \
RUN+="/bin/sh -c 'echo 60 > /sys$$DEVPATH/timeout'"
And change the "echo 60" part of the line to the value that you want.
The default timeout for normal File System commands is 30 seconds when udev
is not being used. If udev is used the default is the above value which
is normally 60 seconds.
8.1.2.2 Pending Commands and replacement_timeout
================================================
Commonly, the SCSI/BLOCK layer will queue 256 commands, but the path can
only take 32. When a network problem is detected, the 32 commands
in flight will be sent back to the SCSI layer immediately and because
multipath is being used, this will cause the commands to be sent to the multipath
layer for execution on another path. However, the other 96 commands that were
still in the SCSI/BLOCK queue will remain there until the session is
re-established or until node.session.timeo.replacement_timeout seconds has
gone by. After replacement_timeout seconds, the pending commands will be
failed to the multipath layer, and all new incoming commands will be
immediately failed back to the multipath layer. If a session is later
re-established, then new commands will be queued and executed. Normally,
multipathd's path tester mechanism will detect that the session has been
re-established and the path is accessible again, and it will inform
dm-multipath.
8.1.3 Optimal replacement_timeout Value
=======================================
The default value for replacement_timeout is 120 seconds, but because
multipath's queue_if_no_path and no_path_retry setting can prevent IO errors
from being propagated to the application, replacement_timeout can be set to a
shorter value like 5 to 15 seconds. By setting it lower, pending IO is quickly
sent to a new path and executed while the iSCSI layer attempts
re-establishment of the session. If all paths end up being failed, then the
multipath and device mapper layer will internally queue IO based on the
multipath.conf settings, instead of the iSCSI layer.
8.2 iSCSI settings for iSCSI root
=================================
When accessing the root partition directly through an iSCSI disk, the
iSCSI timers should be set so that iSCSI layer has several chances to try to
re-establish a session and so that commands are not quickly requeued to
the SCSI layer. Basically you want the opposite of when using dm-multipath.
For this setup, you can turn off iSCSI pings by setting:
node.conn[0].timeo.noop_out_interval = 0
node.conn[0].timeo.noop_out_timeout = 0
And you can turn the replacement_timer to a very long value:
node.session.timeo.replacement_timeout = 86400
9. iSCSI System Info
====================
To get information about the running sessions: including the session and
device state, session ids (sid) for session mode, and some of the
negotiated parameters, run:
iscsiadm -m session -P 2
If you are looking for something shorter, like just the sid to node mapping,
run:
iscsiadm -m session [-P 0]
This will print the list of running sessions with the format:
driver [sid] ip:port,target_portal_group_tag targetname
Example output of "iscsiadm -m session":
tcp [2] 10.15.84.19:3260,2 iqn.1992-08.com.netapp:sn.33615311
tcp [3] 10.15.85.19:3260,3 iqn.1992-08.com.netapp:sn.33615311
To print the hw address info use the -P option with "1":
iscsiadm -m session -P 1
This will print the sessions with the following format:
Target: targetname
Current Portal: portal currently logged into
Persistent Portal: portal we would fall back to if we had got
redirected during login
Iface Transport: driver/transport_name
Iface IPaddress: IP address of iface being used
Iface HWaddress: HW address used to bind session
Iface Netdev: netdev value used to bind session
SID: iscsi sysfs session id
iSCSI Connection State: iscsi state
Note: if an older kernel is being used or if the session is not bound,
then the keyword "default" is printed to indicate that the default
network behavior is being used.
Example output of "iscsiadm -m session -P 1":
Target: iqn.1992-08.com.netapp:sn.33615311
Current Portal: 10.15.85.19:3260,3
Persistent Portal: 10.15.85.19:3260,3
Iface Transport: tcp
Iface IPaddress: 10.11.14.37
Iface HWaddress: default
Iface Netdev: default
SID: 7
iSCSI Connection State: LOGGED IN
Internal iscsid Session State: NO CHANGE
The connection state is currently not available for qla4xxx.
To get a HBA/Host view of the session, there is the host mode:
iscsiadm -m host
This prints the list of iSCSI hosts in the system with the format:
driver [hostno] ipaddress,[hwaddress],net_ifacename,initiatorname
Example output:
cxgb3i: [7] 10.10.15.51,[00:07:43:05:97:07],eth3 <empty>
To print this info in a more user friendly way, the -P argument can be used:
iscsiadm -m host -P 1
Example output:
Host Number: 7
State: running
Transport: cxgb3i
Initiatorname: <empty>
IPaddress: 10.10.15.51
HWaddress: 00:07:43:05:97:07
Netdev: eth3
Here, you can also see the state of the host.
You can also pass in any value from 1 - 4 to print more info, like the
sessions running through the host, what ifaces are being used and what
devices are accessed through it.
To print the info for a specific host, you can pass in the -H argument
with the host number:
iscsiadm -m host -P 1 -H 7