/popeye

🧭 A Kubernetes cluster resource sanitizer

Primary LanguageGoOtherNOASSERTION

Popeye - A Kubernetes Cluster Sanitizer

Popeye is a utility that scans live Kubernetes cluster and reports potential issues with deployed resources and configurations. It sanitizes your cluster based on what's deployed and not what's sitting on disk. By scanning your cluster, it detects misconfigurations and ensure best practices are in place thus preventing potential future headaches. It aims at reducing the cognitive overload one faces when operating a Kubernetes cluster in the wild. Furthermore, if your cluster employs a metric-server, it reports potential resources over/under allocations and attempts to warn you should your cluster run out of capacity.

Popeye is a readonly tool, it does not alter any of your Kubernetes resources in any way!




Go Report Card codebeat badge golangci badge Build Status release License Docker Repository on Quay Releases


Installation

Popeye is available on Linux, OSX and Windows platforms.

  • Binaries for Linux, Windows and Mac are available as tarballs in the release page or via the SnapCraft link above.

  • For OSX/Unit using Homebrew/LinuxBrew

    brew install derailed/popeye/popeye
  • Building from source Popeye was built using go 1.12+. In order to build Popeye from source you must:

    1. Clone the repo

    2. Add the following command in your go.mod file

      replace (
        github.com/derailed/popeye => MY_POPEYE_CLONED_GIT_REPO
      )
      
    3. Build and run the executable

      go run main.go

    Quick recipe for the impatient:

    # Clone outside of GOPATH
    git clone https://github.com/derailed/popeye
    cd popeye
    # Build and install
    go install
    # Run
    popeye

Sanitizers

Popeye scans your cluster for best practices and potential issues. Currently, Popeye only looks at nodes, namespaces, pods and services. More will come soon! We are hoping Kubernetes friends will pitch'in to make Popeye even better.

The aim of the sanitizers is to pick up on misconfigurations ie things like ports mismatch, dead or unused resources, metrics utilization, probes, container images, RBAC rules, naked resources, etc...

Popeye is not another static analysis tool. It runs and inspect Kubernetes resources on live clusters and sanitize resources as they are in the wild!

Here is a list of some of the available sanitizers

Resource Sanitizers Aliases
🛀 Node no
Conditions ie not ready, out of mem/disk, network, pids, etc
Pod tolerations referencing node taints
CPU/MEM utilization metrics, trips if over limits (default 80% CPU/MEM)
🛀 Namespace ns
Inactive
Dead namespaces
🛀 Pod po
Pod status
Containers statuses
ServiceAccount presence
CPU/MEM on containers over a set CPU/MEM limit (default 80% CPU/MEM)
Container image with no tags
Container image using latest tag
Resources request/limits presence
Probes liveness/readiness presence
Named ports and their references
🛀 Service svc
Endpoints presence
Matching pods labels
Named ports and their references
🛀 ServiceAccount sa
Unused, detects potentially unused SAs
🛀 Secrets sec
Unused, detects potentially unused secrets or associated keys
🛀 ConfigMap cm
Unused, detects potentially unused cm or associated keys
🛀 Deployment dp, deploy
Unused, pod template validation, resource utilization
🛀 StatefulSet sts
Unsed, pod template validation, resource utilization
🛀 DaemonSet ds
Unsed, pod template validation, resource utilization
🛀 PersistentVolume pv
Unused, check volume bound or volume error
🛀 PersistentVolumeClaim pvc
Unused, check bounded or volume mount error
🛀 HorizontalPodAutoscaler hpa
Unused, Utilization, Max burst checks
🛀 PodDisruptionBudget
Unused, Check minAvailable configuration pdb
🛀 ClusterRole
Unused cr
🛀 ClusterRoleBinding
Unused crb
🛀 Role
Unused ro
🛀 RoleBinding
Unused rb
🛀 Ingress
Valid ing
🛀 NetworkPolicy
Valid np
🛀 PodSecurityPolicy
Valid psp

Save the report

To save the Popeye report to a file pass the --save flag to the command. By default it will create a temp directory and will store the report there, the path of the temp directory will be printed out on STDOUT. If you have the need of specify the output directory for the report by your own you can use the environment variable POPEYE_REPORT_DIR.

Example to save report in working directory:

  $ POPEYE_REPORT_DIR=$(pwd) popeye --save

Save the report to S3

You could also save the generated report to an AWS S3 bucket with providing the flag --s3-bucket, as parameter you need to provide the name of the S3 bucket where you want to store the report.

Underlying the AWS Go lib is used which is handling the credential loading for more information check out the official documentation.

Example to save report to S3:

  $ popeye --s3-bucket=NAME-OF-YOUR-S3-BUCKET --out=json

The Command Line

You can use Popeye standalone or using a spinach yaml config to tune the sanitizer. Details about the Popeye configuration file are below.

# Dump version info
popeye version
# Popeye a cluster using your current kubeconfig environment.
popeye
# Popeye uses a spinach config file of course! aka spinachyaml!
popeye -f spinach.yml
# Popeye a cluster using a kubeconfig context.
popeye --context olive
# Stuck?
popeye help

Output Formats

Popeye can generate sanitizer reports in a variety of formats. You can use the -o cli option and pick your poison from there.

Format Description Default Credits
standard The full monty output iconized and colorized yes
jurassic No icons or color like it's 1989
yaml As YAML
json As JSON
junit For the Java melancholic
prometheus Dumps report a prometheus scrappable metrics dardanel
score Returns a single cluster sanitizer score value (0-100) kabute

The SpinachYAML Configuration

A spinach.yml configuration file can be specified via the -f option to further configure the sanitizers. This file may container utilization threshold and specific sanitizer configurations as well as which resources to exclude in your cluster.

NOTE: This file will change as Popeye matures!

A resource is identified by a resource kind and a fully qualified resource name ie namespace/resource_name. For example a pod named fred-1234 in namespace blee FQN will be blee/fred-1234. This provides for differentiating fred/p1 and blee/p1. For cluster wide resources, FQN=name. Exclude rules can have either a straight string match or a regular expression. In the later case the regular expression must be indicated using the rx: prefix.

NOTE! Please thread carefully here with your regex as more resources than expected may get excluded from the report via a loose regex rule. When your cluster resources change, this could lead to rendering sanitization sub-optimal. Once in a while it might be a good idea to run Popeye Config less to make sure you are trapping any new issues that may have arised in your clusters...

Here is an example spinach file as it stands in this release. There is a fuller eks based spinach file in this repo under spinach. (BTW: for new comers into the project, might be a great way to contribute by adding cluster specific spinach file PRs...)

# A Popeye sample configuration file
popeye:
  # Checks resources against reported metrics usage.
  # If over/under these thresholds a sanitization warning will be issued.
  # Your cluster must run a metrics-server for these to take place!
  allocations:
    cpu:
      underPercUtilization: 200 # Checks if cpu is under allocated by more than 200% at current load.
      overPercUtilization: 50   # Checks if cpu is over allocated by more than 50% at current load.
    memory:
      underPercUtilization: 200 # Checks if mem is under allocated by more than 200% at current load.
      overPercUtilization: 50   # Checks if mem is over allocated by more than 50% usage at current load.

  # Excludes excludes certain resources from Popeye scans
  excludes:
    # ConfigMap sanitizer exclusions...
    configmap:
      # Excludes key must match the singular form of the resource.
      # For instance this rule will exclude all configmaps named fred.v2.3 and fred.v2.4
      - name: rx:fred.+\.v\d+
    # Namespace sanitizer exclusions...
    namespace:
      # Exclude all fred* namespaces if the namespaces are not found (404), other error codes will be reported!
      - name: rx:kube
        codes:
          - 404
      # Exclude all istio* namespaces from being scanned.
      - name: rx:istio

  # Configure node resources.
  node:
    # Limits set a cpu/mem threshold in % ie if cpu|mem > limit a lint warning is triggered.
    limits:
      # CPU checks if current CPU utilization on a node is greater than 90%.
      cpu:    90
      # Memory checks if current Memory utilization on a node is greater than 80%.
      memory: 80

  # Configure pod resources
  pod:
    # Restarts check the restarts count and triggers a lint warning if above threshold.
    restarts:
      3
    # Check container resource utilization in percent.
    # Issues a lint warning if about these threshold.
    limits:
      cpu:    80
      memory: 75

Popeye In Your Clusters!

Alternatively, Popeye is containerized and can be run directly in your Kubernetes clusters as a single shot or cronjob.

Here is a sample setup, please modify per your needs/wants. The manifests for this are in the k8s directory in this repo.

kubectl apply -f k8s/popeye/ns.yml && kubectl apply -f k8s/popeye
---
apiVersion: batch/v1
kind: CronJob
metadata:
  name:      popeye
  namespace: popeye
spec:
  schedule: "* */1 * * *" # Fireoff Popeye once an hour
  concurrencyPolicy: Forbid
  jobTemplate:
    spec:
      template:
        spec:
          serviceAccountName: popeye
          restartPolicy: Never
          containers:
            - name: popeye
              image: quay.io/derailed/popeye:v0.3.6
              imagePullPolicy: IfNotPresent
              args:
                - -o
                - yaml
              resources:
                limits:
                  cpu:    500m
                  memory: 100Mi

Popeye has got your RBAC!

In order for Popeye to do his work, the signed-in user must have enough RBAC oomph to get/list the resources mentioned above.

Sample Popeye RBAC Rules (Subject to change!!)

---
# Popeye ServiceAccount.
apiVersion: v1
kind:       ServiceAccount
metadata:
  name:      popeye
  namespace: popeye

# Popeye needs get/list access on the following Kubernetes resources.
apiVersion: rbac.authorization.k8s.io/v1
kind:       ClusterRole
metadata:
  name: popeye
rules:
- apiGroups: [""]
  resources:
   - configmaps
   - deployments
   - endpoints
   - horizontalpodautoscalers
   - namespaces
   - nodes
   - persistentvolumes
   - persistentvolumeclaims
   - pods
   - secrets
   - serviceaccounts
   - services
   - statefulsets
  verbs:     ["get", "list"]
- apiGroups: ["rbac.authorization.k8s.io"]
  resources:
  - clusterroles
  - clusterrolebindings
  - roles
  - rolebindings
  verbs:     ["get", "list"]
- apiGroups: ["metrics.k8s.io"]
  resources:
  - pods
  - nodes
  verbs:     ["get", "list"]

---
# Binds Popeye to this ClusterRole.
apiVersion: rbac.authorization.k8s.io/v1
kind:       ClusterRoleBinding
metadata:
  name: popeye
subjects:
- kind:     ServiceAccount
  name:     popeye
  namespace: popeye
roleRef:
  kind:     ClusterRole
  name:     popeye
  apiGroup: rbac.authorization.k8s.io

Screenshots

Cluster D Score

Cluster A Score

Report Morphology

The sanitizer report outputs each resource group scanned and their potential issues. The report is color/emoji coded in term of Sanitizer severity levels:

Level Icon Jurassic Color Description
Ok ✅ OK Green Happy!
Info 🔊 I BlueGreen FYI
Warn 😱 W Yellow Potential Issue
Error 💥 E Red Action required

The heading section for each Kubenertes resource scanned, provides an issue rollup summary count for each of the categories above.

The Summary section provides a Popeye Score based on the sanitization pass on the given cluster.

Known Issues

This initial drop is brittle. Popeye will most likely blow up...

  • You're running older versions of Kubernetes. Popeye works best Kubernetes 1.13+.
  • You don't have enough RBAC fu to manage your cluster (see RBAC section)

Disclaimer

This is work in progress! If there is enough interest in the Kubernetes community, we will enhance per your recommendations/contributions. Also if you dig this effort, please let us know that too!

ATTA Girls/Boys!

Popeye sits on top of many of open source projects and libraries. Our sincere appreciations to all the OSS contributors that work nights and weekends to make this project a reality!

Contact Info

  1. Email: fernand@imhotep.io
  2. Twitter: @kitesurfer

 Â© 2019 Imhotep Software LLC. All materials licensed under Apache v2.0