im-tomu/tomu-hardware

Issues

• simple small device

  #34 opened 4 years ago by ojej
  0

• ROHS compliance

  #31 opened 4 years ago by InnovativeInventor
  1

• Store data inside flash

  #33 opened 6 years ago by dzonerzy
  1

• Create a easy programming rig

  #8 opened 8 years ago by mithro
  6

• Minor inconsistency in BOM documentation.

  #32 opened 6 years ago by hackup
  4

• Panelize the tomu board -- for cheaper production

  #15 opened 6 years ago by mithro
  1

• Make the tomu PCB work with OSH park

  #12 opened 8 years ago by mithro
  7

• Schematics image, but with a photo/diagram of the physical layout

  #29 opened 7 years ago by micolous
  2

• Reset pin not connected

  #22 opened 7 years ago by xobs
  1

• U1 pin 1 marker is confusing

  #21 opened 7 years ago by xobs
  1

• Flashprint complains the 0.4 short case has errors

  #27 opened 7 years ago by deece
  2

• Figure out a way to add a good random value source

  #9 opened 8 years ago by mithro
  5

• Copy the kicad versions from the tags into the releases directory

  #25 opened 7 years ago by mithro
  0

• Order and test tomu boards from Dirty PCBs

  #13 opened 8 years ago by mithro
  4

• Test the ARM SWD

  #7 opened 8 years ago by mithro
  3

• Commit design for 3d printable case

  #1 opened 8 years ago by mithro
  2

• Finish the NXP Kinetis KL27 "pro" version

  #2 opened 8 years ago by mithro
  1

• Order and test tomu boards from Seeed Studio

  #14 opened 8 years ago by mithro
  1

• Add some pictures / videos of the board

  #3 opened 8 years ago by mithro
  1

• Test the LEUART

  #6 opened 8 years ago by mithro
  1

• Create a QEMU emulation environment

  #10 opened 8 years ago by mithro
  2

• Move the schematic pdf into the releases directory

  #4 opened 8 years ago by mithro
  0

• Commit design for tomu board holder thingy

  #5 opened 8 years ago by mithro
  0