Python Env Wrapper is a set of commands to manage multiple virtual environments. Pew can create, delete and copy your environments, using a single command to switch to them wherever you are, while keeping them in a single (configurable) location.
Virtualenvs makes it easier to work on more than one project at a time without introducing conflicts in their dependencies.
Pew is completely shell-agnostic and thus works on bash, zsh, fish, powershell, etc.
Pew and its dependencies rely on a couple of features of pip/setuptools which might not be available on old versions. In case your distribution doesn't ship with one recent enough, you'll probably want to run pip install --upgrade pip
before the installation.
If you cannot upgrade the version of setuptools on your system, and one of the packages listed below is of no use to you, I suggest to use pipsi
rather than plain pip
pipsi install pew
See the troubleshooting section, if needed.
There are also some packages, more or less up-to-date:
For Archlinux, there's an AUR package
Ok, Pew is shell-agnostic, but how is your shell going to be selected?
Look for the SHELL
environment variable: on most unix-like systems it's already defined in a login shell, and you can verify it with commands like:
env | grep SHELL
or
python3 -c 'import os;print(os.environ.get("SHELL","No shell defined"))'
Since that variable is not commonly used on Windows, we're defaulting to powershell
over there. In all other cases we default instead to sh
.
If CMDER_ROOT
is defined this will select Cmder (a custom configuration of cmd.exe
). Custom selection for even more shells might be added in the future.
A python installed from the normal .exe
file behaves differently from a python installed inside Cygwin. For this reason if you want to use Pew inside a Cygwin shell, you should use a Cygwin python, and if you want to use it inside Powershell, you should use your normal Python install, and avoid a Cygwin one.
You can create a new virtualenv, with a non-default python and specifying some packages to be installed in it, like this:
~> pew new --python=pypy -i django myproject
Running virtualenv with interpreter /home/dario/Applications/bin/pypy
New pypy executable in myproject/bin/pypy
Installing distribute..................................................................
.......................................................................................
..................................................................done.
Installing pip................done.
Downloading/unpacking django
Downloading Django-1.5.1.tar.gz (8.0MB):
8.0MB downloaded
Running setup.py egg_info for package django
warning: no previously-included files matching '__pycache__' found under directory '*'
warning: no previously-included files matching '*.py[co]' found under directory '*'
Installing collected packages: django
[SNIP]
Successfully installed django Cleaning up...
Launching subshell in virtual environment. Type 'exit' or 'Ctrl+D' to return.
Once inside, you can check the current python version, list the packages present in its python's site-packages directory, and install additional packages like this:
myproject ~> python -V
Python 2.7.3 (b9c3566aa017, May 09 2013, 09:09:14)
[PyPy 2.0.0 with GCC 4.6.3]
myproject ~> pew lssitepackages
distribute-0.6.34-py2.7.egg Django-1.5.1-py2.7.egg-info setuptools.pth pip-1.3.1-py2.7.egg
easy-install.pth django
myproject ~> pip install pdbpp
Downloading/unpacking pdbpp
[SNIP]
Successfully installed pdbpp fancycompleter wmctrl pygments pyrepl
Cleaning up...
myproject ~> pip freeze
Django==1.5.1
Pygments==1.6
cffi==0.6
distribute==0.6.34
fancycompleter==0.4
pdbpp==0.7.2
pyrepl==0.8.4
wmctrl==0.1
wsgiref==0.1.2
myproject ~> ^D
You can also specify a requirements file, to be passed on to pip, and activate another virtualenv with workon:
~> pew new -r ~/Projects/topaz/requirements.txt topaz
New python executable in topaz/bin/python
[SNIP]
Successfully installed rply pytest invoke requests py
Cleaning up...
Launching subshell in virtual environment. Type 'exit' or 'Ctrl+D' to return.
topaz ~> ^D
~> pew workon myproject
Launching subshell in virtual environment. Type 'exit' or 'Ctrl+D' to return.
myproject ~>
Since 0.1.16, Pew integrates Pythonz, which allows you to easily install a new python version (only on linux and macosx):
~> pew install 2.6.1 --type pypy
WARNING: Linux binaries are dynamically linked, as is usual, and thus might not be usable due to the sad story of linux binary compatibility, check the PyPy website for more information
Downloading pypy-2.6.1-linux64.tar.bz2 as /home/dario/.pythonz/dists/pypy-2.6.1-linux64.tar.bz2
########################################################################## 100%
Extracting pypy-2.6.1-linux64.tar.bz2 into /home/dario/.pythonz/build/PyPy-2.6.1
Installing PyPy-2.6.1 into /home/dario/.pythonz/pythons/PyPy-2.6.1
Installed PyPy-2.6.1 successfully.
~> pew new --python=$(pythonz locate 2.6.1 --type pypy) latest_pypy
Running virtualenv with interpreter /home/dario/.pythonz/pythons/PyPy-2.6.1/bin/python
New pypy executable in latest_pypy/bin/python
Also creating executable in latest_pypy/bin/pypy
Installing setuptools, pip, wheel...done.
Launching subshell in virtual environment. Type 'exit' or 'Ctrl+D' to return.
latest_pypy ~> python -V
Python 2.7.10 (f3ad1e1e1d62, Aug 28 2015, 10:45:29)
[PyPy 2.6.1 with GCC 4.8.4]
When invoked without arguments pew
will output the list of all commands with each one's description
Create a new environment, in the WORKON_HOME.
usage: pew new [-hd] [-p PYTHON] [-i PACKAGES] [-a PROJECT] [-r REQUIREMENTS] envname
The new environment is automatically activated after being initialized.
The -a
option can be used to associate an existing project directory with the new environment.
The -i
option can be used to install one or more packages (by repeating the option) after the environment is created.
The -r
option can be used to specify a text file listing packages to be installed. The argument value is passed to pip -r
to be installed.
List or change working virtual environments.
usage: pew workon [environment_name]
If no environment_name
is given the list of available environments is printed to stdout.
Create a temporary virtualenv.
usage: pew mktmpenv [-h] [-p PYTHON] [-i PACKAGES] [-a PROJECT] [-r REQUIREMENTS]
List all of the environments.
usage: pew ls [-h] [-b | -l]
The --long
options will print each virtualenv side-by-side with its Python version and the contents of its site-packages
usage: pew show [env]
Run a command in each virtualenv.
usage: pew inall [command]
Run a command in the given virtualenv.
usage: pew in [env] [command]
Remove one or more environments, from the WORKON_HOME.
usage: pew rm envs [envs ...]
You have to exit from the environment you want to remove.
Use Pythonz to download and build a Python vm
usage: pew install [options] version
To install Python3.5.0
pew install 3.5.0
To install Pypy:
pew install 2.6.1 --type pypy
List the pythons installed by Pythonz
usage: pew list_pythons [options]
You can list all the Pythons available to install with -a
or --all-versions
Locate the path for the python version installed by Pythonz
usage: pew locate_python [options] version
Duplicate an existing virtualenv environment. The source can be an environment managed by virtualenvwrapper or an external environment created elsewhere.
Copying virtual environments is not well supported. Each virtualenv has path information hard-coded into it, and there may be cases where the copy code does not know to update a particular file. Use with caution.
usage: pew cp [-hd] source [targetenvname]
Target environment name is required for WORKON_HOME duplications. However, target environment name can be omitted for importing external environments. If omitted, the new environment is given the same name as the original.
Returns the location of the currently active's site-packages
Equivalent to ls $(sitepackages_dir)
.
Adds the specified directories to the Python path for the currently-active virtualenv.
usage: pew add [-h] [-d] dirs [dirs ...]
Sometimes it is desirable to share installed packages that are not in the system site-packages
directory and which should not be installed in each virtualenv. One possible solution is to symlink the source into the environment site-packages
directory, but it is also easy to add extra directories to the PYTHONPATH by including them in a .pth
file inside site-packages
using pew add
.
The -d
flag removes previously added directiories.
The directory names are added to a path file named _virtualenv_path_extensions.pth
inside the site-packages directory for the environment.
Controls whether the active virtualenv will access the packages in the global Python site-packages
directory.
usage: pew toggleglobalsitepackages [-q]
Create a new virtualenv in the WORKON_HOME
and project directory in PROJECT_HOME
.
usage: pew mkproject [-hd] [-p PYTHON] [-i PACKAGES] [-a PROJECT] [-r REQUIREMENTS] [-t TEMPLATES] [-l] envname
The template option may be repeated to have several templates used to create a new project. The templates are applied in the order named on the command line. All other options are passed to pew new
to create a virtual environment with the same name as the project.
A template is simply an executable to be found in WORKON_HOME
, it will be called with the name of the project, and the project directory as first and second argument, respectively. A template_django
script is given as an example inside the pew
package.
Bind an existing virtualenv to an existing project.
usage: pew setproject [virtualenv_path] [project_path]
When no arguments are given, the current virtualenv and current directory are assumed.
Try to restore a broken virtualenv by reinstalling the same python version on top of it
usage: pew restore env
Rename a virtualenv (by copying it over to the new name, and deleting the old one)
usage: pew rename source target
Remove all installed packages from the current (or supplied) env.
usage: pew wipeenv [env]
Prints the path for the current $SHELL helper file
usage: pew shell_config
Prints the path for the supplied env
usage: pew dir env
You can customize pew's virtualenvs directory location, with the $XDG_DATA_HOME
or $WORKON_HOME
environment variables, and the locations of new projects created with mkproject by setting $PROJECT_HOME
(otherwise, the current directory will be selected).
If you've defined in your shell rc file to export a PATH location that might shadow the executables needed by pew (or your project), you might find that when getting into the environment, they will still be at the head of the PATH.
There're multiple way to overcome this issue:
- Move your export statements into the profile (
.bash_profile
and.zprofile
for bash and zsh respectively, or in fish wrap your statements in aif status --is-login
block ) and set up your terminal emulator to launch your shell as a login shell - Change your exports to put the new location at the tail, instead of the head of the PATH, e.g.:
export PATH=${PATH}:/usr/bin
- Change the files your OS provides to setup the base environment (it might be useful to look into
/etc/paths.d
,/etc/profile
, and environment.plist)
If you're running the zsh
configuration tool prezto
, and/or you're on MacOSX, you might want to read this (it's about another project for handling dotfiles, but the misconfiguration described is quite similar to one witnessed on other OSX/prezto systems).
This might happen after a Python update, especially on MacOSX, upgrading setuptools
might fix that (you should need superuser permissions to do it)
easy_install -U setuptools
or
pip install --upgrade setuptools
Congratulations! You found a bug, please let me know :)
The test suite for pew
uses tox. Most tests are actually integration tests that will fork shells, create virtualenvs and in some cases even download python packages from Pypi. The whole test suite takes around 1 minute to run on a single interpreter.
With every commit and pull request, the test suite is run over all supported interpreters on travis-ci (for unix-like) and appveyor (for windows).
To run individual test scripts, run from the top level directory of the repository a command like:
tox tests/test_setproject.py
To run tests under a single version of Python, specify the appropriate environment when running tox
:
tox -e py27
Combine the two modes to run specific tests with a single version of Python:
tox -e py27 tests/test_setproject.py
You can also filter them:
tox -e py34 -- -k workon
Add new tests by modifying an existing file or creating new script in the tests directory.
The first run setup should take care of this for you.
You can do it manually by appending to your .bashrc
/.zshrc
source $(pew shell_config)
Just like for bash/zsh, but since fish uses a fish_prompt
function and not a PS1
environment variable, the setup will only make available to you a fish function pew_prompt
. Just use its output in the fish_prompt
function.
Add this to a prompt function:
Write-Host -NoNewLine -f blue ([System.IO.Path]::GetFileName($env:VIRTUAL_ENV))
(There's currently a Pull Request open for it)
Adding hooks for installing some packages on each new virtualenv creation is quite easy, but I couldn't find some comprehensive hook examples, and virtualenvwrapper's hook implementation lets the hook return a script to be sourced.
This could be handled by (instead of getting back a script to be sourced) getting back an environment/list of key-values to be applied when invoking inve.
But to handle just the simple case, using the existing virtualenvwrapper's infrastructure (which relied on stevedore) seemed like overkill, and given that the most interesting virtualenvwrapper's extensions have been merged to the trunk at the end, and that I never used virtualenvwrapper's hook first hand, I decided to skip them, at least for now.
Everyone who submitted patches/PR, as of September 2015:
- José Luis Lafuente
- Arthur Vuillard
- Jakub Stasiak
- Ryan Hiebert
- Michael Hofer
- Daniel Harding
- Timothy Corbett-Clark
- Simon Junod
- Robin
- Matei Trușcă
- Lucas Cimon
Thanks also to Michael F. Lamb for his thought provoking gist and to Doug Hellman for virtualenvwrapper
Pew is written in pure python and leverages inve: the idea for a better activate script.
Pew was originally a rewrite of virtualenvwrapper, the advantage is that pew doesn't hook into a shell, but is only a set of commands, thus completely shell-agnostic:
It works on bash, zsh, fish, powershell, etc.
Thanks to using Python libraries and setuptools for dependency management, to Python stricter error handling and the fact that "shelling out" let us avoid keeping track of the previous environment variable values, pew code is much shorter and easier to understand than virtualenvwrapper's. How many Python programmers know at a glance what does "${out_args[@]-}"
do? Or eval "envname=\$$#"
? Or all other bash quirks for that matter?