Author: Dr Silvio Cesare of InfoSect License: GPLv3 http://busside.com.au To flash the firmware: # apt-get install esptool # git clone http://github.com/BSidesCbr/BUSSide.git # cd BUSSide # ./flash_busside.sh /dev/ttyUSB0 This assumes the BUSSide is detected as /dev/ttyUSB0. If it's detect as /dev/ttyUSB1, or otherwise, use that instead. To use the BUSSide: # cd BUSSide/Client # ./busside.py /dev/ttyUSB0 == If you wan't to flash the BUSSide using a different firmware image, then try: # esptool --port /dev/ttyUSB0 write_flash 0x00000 BUSSide/FirmwareImages/xx.bin