intel-iot-devkit/zmraa

Issues

• Initializing Analog Pins from Arc core fails

  #51 opened 7 years ago by preethi2017
  2

• Read/write to GPIO pin from ARC core fails in C1000

  #50 opened 7 years ago by preethi2017
  0

• Selecting CONFIG_MRAA_GPIO should automatically select GPIO driver

  #1 opened 8 years ago by whbruce
  3

• i2c should be disabled for BOARD=arduino_101

  #45 opened 7 years ago by whbruce
  6

• GPIO Interrupts do not appear to work

  #41 opened 7 years ago by jontrulson
  2

• mraa_pwm_enable() needs to be implemented

  #42 opened 8 years ago by jontrulson
  0

• Request for support of the Intel(R) Quark SE C1000 microcontroller

  #40 opened 8 years ago by rmatwood
  1

• No console output from examples/aio_read on Zephyr 1.5.0/master with Arduino 101

  #33 opened 8 years ago by alext-mkrs
  5

• Arduino 101: provide access to internal SPI bus

  #18 opened 8 years ago by jontrulson
  2

• SPI Transceive -> weird behavior

  #22 opened 8 years ago by maxdos64
  1

• Wrap printf diagnotics in something like a CONFIG_MRAA_DIAGNOSTICS define

  #20 opened 8 years ago by jontrulson
  0

• GPIO ISR does not work correctly after enable/disable/enable sequence

  #4 opened 8 years ago by whbruce
  0

• mraa_gpio_isr hangs

  #3 opened 8 years ago by whbruce
  1

• Board selection should set pin count etc.

  #2 opened 8 years ago by whbruce
  1