Issues
- 19
Can't set GPIO port as output - Raspberry 4 and 5
#167 opened by sigmashig - 1
Pull up configuration wrong for some GPIO inputs
#174 opened by JR-Home - 7
SD-Card: error return: Cannot evaluate: Filesystem 1K-blocks Used Available Use% Mounted onoverlay
#127 opened by OneCreek - 1
Adding metrics
#172 opened by Docjones - 0
- 7
Getting an error in log using raspberry pi 5
#163 opened by BlueDawnxx - 5
Parsing error with output of 'df'
#158 opened by Grothesk242 - 5
- 6
Configure internal Pull UP/Down Resistor
#31 opened by TBobsin - 2
Software debounce GPIO IN
#30 opened by Smallfeuer - 9
Cannot setup port (for example 14 ) as input: Error: EINVAL: invalid argument, write
#129 opened by smartboart - 2
- 25
GPIO Eingang als Taster mit externen Pullup
#86 opened by e-i-k-e - 2
Temperatursensor MLX90614
#123 opened by SIMI888 - 2
add PWM funcionality
#115 opened by EtzeSte13 - 2
Compatibility check to js-controller 4.0
#107 opened by ioBrokerChecker - 5
USB hard drive
#118 opened by nimda2 - 2
How do I work with the ODROID N2 GPIOs
#104 opened by BS-GIFHUB - 0
- 1
Installation schlägt fehl
#112 opened by bobmorane77 - 4
2nd RPI2 Instance on Multihost
#100 opened by MSal-RPI4 - 13
Steer/monitor another Raspi
#92 opened by Pedder007 - 3
state change on gpios configured as output for exmple for relais after reboot or starting the adapter
#76 opened by smartboart - 2
- 3
- 6
Using adapter with multihost
#40 opened by wolwo3 - 5
CPU frequence not detected error
#17 opened by CoHoAppel - 2
- 2
- 3
iobroker Docker: Cannot setup port 23 as input: Error: EACCES: permission denied, open ‚/sys/class/gpio/export‘
#18 opened by mtk64 - 10
- 0
- 0
- 2
DHT11/22 Input type
#44 opened by raintonr - 2
Bump Version for release
#49 opened by raintonr - 1
Add port 'label' or 'friendly name'
#51 opened by raintonr - 2
Bump to v2 of rpi-gpio-buttons
#54 opened by raintonr - 1
several Raspberry in use
#79 opened by RoboCop0815 - 2
gpio switches during start of adapter
#71 opened by tj551955 - 0
Disable parser when no monitor is enabled
#52 opened by raintonr - 1
Refactor SyncPort, etc
#50 opened by raintonr - 1
Remove redundant anyInputs
#47 opened by raintonr - 1
Make it clear the adapter uses MODE_BCM
#45 opened by raintonr - 1
Where to configure the RPI's addresses
#36 opened by Jade64 - 0
- 12
GPIOs not working in Version 1.2.0
#22 opened by daum1988 - 5
- 1
adapter.objects.getObjectList is deprecated, and will be removed in the future. Please use adapter.getObjectList/Async. Report this to Developer!
#21 opened by joergeli - 0
rpi2 creates devices every minute
#15 opened by Garfonso - 4
Installation stops with ERROR:31
#12 opened by therod666